SCIENTIFIC AND TECHNICAL AEROSPACE REPORTS
A Biweekly Publication of the National Aeronautics and Space Administration
VOLUME 44, ISSUE 4 - February 24, 2006
33 ELECTRONICS AND ELECTRICAL ENGINEERING
Includes development, performance, and maintainability of electrical/electronic devices and components; related test equipment; and microelectronics and integrated circuitry.
For related information see also 60 Computer Operations and Hardware; and 76 Solid-State Physics.
For communications equipment and devices see 32 Communications and Radar.
20060005670 Princeton Resources, Inc., NJ, USA, Colorado State Univ., Fort Collins, CO, USA
Integrated Ferroelectrics Journal, Volume 70 (2005)
Taylor, G. W.; Paz De Araujo, C. A.; January 2005; 178 pp.; In English Report No.(s): PB2006-101624; Copyright; Avail.: National Technical Information Service (NTIS)
Contents: Electrical Properties of BST Thin Films Fabricated By A Modified Sol-Gel Processing; Effect of the Coating Speed On Dipole Relaxation Time In The YMnO(sub 3) Thin Films; Sol-Gel Processing Of Lead Lanthanum Zirconate Titanate Fibers; Scaling the Ferroelectric Field Effect Transistor; Effect of Zr Substitution for Ti on the Dielectric and Ferroelectric Properties of Barium Titanate Thin Films. NTIS
Ferroelectricity; Fabrication
20060005678 Princeton Resources, Inc., NJ, USA, Colorado State Univ., Fort Collins, CO, USA
| |
| Tools for Aviation/Aerospace |
| IHS sells products and services designed to meet the needs of today's engineers. To learn more, and for a free quote, please complete the form below. |
|
Proceedings of the International Symposium on Ferroelectricity and Piezoelectricity IMRC 2004. Volume 71 (2005). Held in Cancun Mexico on August 22-26, 2004
Taylor, G. W.; Paz De Araujo, C. A.; January 2005; 336 pp.; In English; International Symposium on Ferroelectricity and Piezoelectricity IMRC 2004. Volume 71 (2005)., August 22 - 26, 2004, Cancun Mexico Report No.(s): PB2006-101625; Copyright; Avail.: National Technical Information Service (NTIS)
Partial Contents: Organizing Committee and Sponsors Guest Editorial; Dielectric Permittivity and Pyroelectric Response of Compositionally Graded Ferroelectrics; Comparative Studies of Ferroelectric Thin Films for High Frequency Phase Shifter Applications; In Situ Measurements of Macroscopic Film Stress During Growth, Cooling, And Thermal Cycling Of Thin Film PbTiO3; Thin Film Processing and Integration Methods to Enable Affordable Mobile Communications Systems; Ferromagnetic-Ferroelectric Layered Structures: Magnetoelectric Interactions and Devices; Oriented Ferroelectric Thin Films on Soluble Substrates; Strong Degradation of Physical Properties and Formation of a Dead Layer In Ferroelectric Films Due to Interfacial Dislocations. NTIS
Conferences; Ferroelectricity; Piezoelectricity
20060005715 Forest Products Lab., Madison, WI USA
Calibration of Electric Moisture Meters for Some Wood Species Grown in Hawaii
Oct. 1964; 32 pp.; In English Report No.(s): PB2006-102802; FPL-061; No Copyright; Avail.: CASI: A03, Hardcopy
This Research Note presents species correction data for use with electric moisture meters in measuring the moisture content of five wood species grown in Hawaii, namely: saligna and robusta eucalyptus (Eucalyptus saligna and Eucalyptus robusta), silk-oak (Grevillea robusta), ohia (Metrosideros collina), and koa (Acacia koa). Indexes of direct current electrical resistance and radio frequency power absorption were obtained at a temperature of 80DG F. and at moisture content values ranging from about 6 percent to above the fiber saturation point for each species. The data were obtained using commercial moisture meters of both the resistance and radio frequency power-loss types. True moisture content was defined as that obtained by the ovendrying method. NTIS
Calibrating; Moisture Meters; Wood
20060006333 ARCADIS Geraghty and Miller, Inc., Durham, NC, USA
| |
| Aerospace Engineering Design |
| ESDU packages provide validated design data, methods and software, offering a valuable toolset to aerospace engineers. To learn more, and for a free quote, please complete the form below. |
|
Evaluation of Fugitive Emissions at a Former Landfill Site in Colorado Springs, Colorado Using Ground-Based Optical Remote Sensing Technology
Modrak, M.; Hashmonay, R. A.; Varma, R.; Kagann, R.; Apr. 2005; 54 pp.; In English Report No.(s): PB2006-103429; No Copyright; Avail.: CASI: A04, Hardcopy
A former landfill site located in Colorado Springs, Colorado was assessed for landfill gas emissions in support of reuse options for the property. The current owners of the landfill and the State of Colorado requested assistance from the EPARegion 8 Office, and the Office of Superfund Remediation and Technology Innovation, Technology Integration and Information Branch to perform a site assessment to search for the presence of any fugitive gas emissions from the site. The focus of this study was to evaluate fugitive emissions of methane and volatile organic compounds at the site in support of the reuse objectives, using a scanning open-path Fourier transform infrared spectrometer, open-path tunable diode laser absorption spectroscopy, and an ultra-violet differential optical absorption spectrometer. The study involved a technique developed through research funded by the EPA's National Risk Management Research Laboratory that uses ground-based optical remote sensing technology, known as optical remote sensing-radial plume mapping. The horizontal radial plume mapping (HRPM) method was used to map surface concentrations, and the Vertical Radial Plume Mapping (VRPM) method was used to measure emissions fluxes downwind of the site. NTIS
Colorado; Landfills; Remote Sensing
Source: NASA
|
IHS sells products and services designed to meet the needs of today's aviation & aerospace engineers, including:
- Quick access to FAA, JAA, ICAO and UK-CAA information and regulations.
- Validated engineering methods, data, principles, worked examples, programs and related equations on over 1340 specific aerospace, process, structural and mechanical engineering topics.
- The IHS Fasteners eCatalog, providing decision support for the identification, specification and sourcing of aerospace & defense standard fasteners/hardware such as bolts, screws, nuts, washers, rivets, studs, etc.
- Standards documents and collections from the top aerospace & aviation standards development organizations, including SAE International, AIAA, AIA, FAA and NASA.
|