Government/Military Trends
November 2003
Military Construction Standards and Related Publications
 |
| Issue Table of Contents |
|
|
The following are just some of our many products and services that pertain specifically to Military Construction. To order any of these documents online, just click the document title or go to our website, global.ihs.com to access the documents that you need instantly. For information on our many other products and services go to global.ihs.com or contact us directly at 800-854-7179, 303-397-7956, fax: 303-397-2740, or email: global@ihs.com and mention PRIORITY CODE J84.
Customers outside the U.S. should contact your local IHS Global Info Centre; see Access Global Worldwide for a listing.
American Concrete Institute (ACI)
American Architectural Manufacturers Association (AAMA)
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
ASTM International (ASTM)
American Welding Society (AWS)
Builders Hardware Manufacturers Association, Inc. (BHMA)
International Code Council (ICC)
Institute of Electrical and Electronics Engineers (IEEE)
Kitchen Cabinet Manufacturers Association (KCMA)
Military & Federal Specifications
National Fire Protection Association (NFPA)
Window and Door Manufacturers Association (WDMA)
American Concrete Institute (ACI)
ACI 301
Specifications for Structural Concrete
ACI 302.1R
Guide for Concrete Floor and Slab Construction
ACI 318/318R
Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02)
American Architectural Manufacturers Association (AAMA)
AAMA 501
Methods of Test for Exterior Walls
AAMA/NWWDA 101/I.S.2
Voluntary Specification for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
ASHRAE STD 90.1 IP
Energy Standard for Buildings Except Low-Rise Residential Buildings (Inch)
ASHRAE STD 90.1 SI
Energy Standard for Buildings Except Low-Rise Residential Buildings (Metric)
ASHRAE STD 90.2
Energy-Efficient Design of New Low-Rise Residential Buildings
ASTM International (ASTM)
ASTM C 297
Tensile Strength of Flatwise Tensile Strength of Sandwich Constructions in Flatwise Plane
ASTM C 393
Flexure Test of Flat Sandwich Constructions
ASTM E 90
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM E 119
Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM E 283
Test Method for Determining the Rate of Air Leakage through Exterior Windows, Curtain Walls, and Doors under Specified Pressure Differences Across the Specimen
ASTM E 413
Classification for Rating Sound Insulation
American Welding Society (AWS)
AWS D1.1/D1.1M
Structural Welding Code Steel (AWS D1.1/D1.1M)
AWS D14.3/D14.3M
Specification for Welding Earthmoving and Construction Equipment
Builders Hardware Manufacturers Association, Inc. (BHMA)
ANSI A156.1
Butts and Hinges ***Same as BHMA 101***
ANSI A156.7
Template Hinge Dimensions ***Same as BHMA 111***
ANSI A156.10
Power Operated Pedestrian Doors ***Same as BHMA 1601***
ANSI A156.14
Sliding and Folding Door Hardware ***Same as BHMA 401***
ANSI A156.19
Power Assist and Low-Energy Power-Operated Doors
International Code Council (ICC)
ANSI A117.1
Guidelines for Accessible and Usable Buildings and Facilities-Providing Accessibility and Usability for Physically Handicapped People (ICC/ANSI A117.1-1998)
ICC IBC
International Building Code
Institute of Electrical and Electronics Engineers (IEEE)
IEEE C2
National Electrical Safety Code
Kitchen Cabinet Manufacturers Association (KCMA)
ANSI A161.1
Performance and Construction Standard for Kitchen and Vanity Cabinets
Military & Federal Specifications
A-A-55057
Panels, Wood/Wood Based; Construction and Decorative X
FED-STD-141
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing
MIL-DTL-24441
Paint, Epoxy-Polyamide, General Specification for
MIL-HDBK-1008
Fire Protection for Facilities Engineering, Design, and Construction
MIL-HDBK-1013/1
Design Guidelines for Physical Security of Facilities
MIL-HDBK-1013/10
Design Guidelines for Security Fencing, Gated, Barriers, and Guard Facilities
MIL-HDBK-1110/1
Handbook for Paints and Protective Coatings for Facilities
MIL-HDBK-419
Grounding, Bonding, and Shielding for Electronic Equipments and Facilities Basic Theory
MIL-PRF-49506
Logistics Management Information
MIL-STD-3007
Standard Practice for Unified Facilities Criteria and Unified Facilities Guide Specifications
NBS PS 20
American Softwood Lumber Standard
TT-P-28
Paint, Aluminum, Heat Resisting
TT-P-645
Primer, Paint, Zinc-Molybdate, Alkyd Type
WW-P-541
Plumbing Fixtures (General Specification)
WW-P-541/3
Plumbing Fixtures (Bathtubs) (Detail Specification)
National Fire Protection Association (NFPA)
NFPA 13
Standard for the Installation of Sprinkler Systems X
NFPA 70
National Electric Code (Softbound)
NFPA 72
National Fire Alarm Code
Window and Door Manufacturers Association (WDMA)
NWWDA IS 1
Architectural Wood Flush Doors
IHS also offers standards from these industries and organizations
Aerospace Industries Association of America, Inc. (AIA)
American Concrete Institute (ACI)
American National Standards Institute (ANSI)
American Petroleum Institute (API)
American Society of Mechanical Engineers (ASME)
American Society for Quality (ASQ)
American Society of Safety Engineers (ASSE)
ASTM International (ASTM)
Alliance for Telecommunications Industry Solutions (ATIS)
American Welding Society (AWS)
British Standards Institution (BSI)
Consumer Electronics Association (CEA)
CSA International (CSA)
Canadian Standards Association/American National Standard (CSA/AM)
Deutsches Institut für Normung (DIN)
Electronic Components, Assemblies & Materials Association (ECA)
Electronic Industries Association (EIA)
General Motors (GM)
Government Electronics & Information Technology Association (GEIA)
International Electrotechnical Commission (IEC)
Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Institute for Interconnecting and Packaging Electronic Circuits (IPC)
Industrial Safety Equipment Association (ISEA)
International Organization for Standardization (ISO)
Japanese Standards Association (JSA)
National Electrical Manufacturers Association (NEMA)
National Fire Protection Association (NFPA)
RTCA, Inc.
SAE International
Telecommunications Industry Association (TIA)
Underwriters Laboratories Inc. (UL)
Learn more about Engineering Standards from IHS
Request a Quote by selecting from a list of standards organizations
To place an order, inquire about pricing, or receive additional information, please call (877) 413-5184. Or purchase online by visiting the IHS Standards Store.