 |
| Purchase Information |
| Use this form to request purchase information on ISO online subscriptions. |
|
|
Document ISO 5001 is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
ISO 5001 Document Information:
Title
Cold-Reduced Carbon Steel Sheet for Vitreous Enamelling
International Organization for Standardization
Publication Date:
Jul 1, 2007
Scope:
This International Standard applies to cold-reduced carbon steel sheet
of commercial and drawing
qualities for vitreous enamelling, where surface of the sheet and
chemical composition of the base
metal are of prime importance.
Sheet for vitreous enamelling is produced in thicknesses of 0,36 mm
and thicker (commonly produced
up to 3 mm) and in widths 600 mm and wider in coils and cut lengths.
Sheet for vitreous enamelling
less than 600 mm wide may be slit from wide sheet and will be
considered as sheet.
Commercial quality sheet (VE01) is intended for general fabricating
purposes where sheet is used in
the flat form, or for bending or moderate forming.
Drawing quality sheet (VE02, VE03, VE04 and VE05) is intended for
drawing or severe forming. It is
furnished to all requirements of this International Standard or, by
agreement when ordered, to
fabricate an identified part, in which case the mechanical properties
of Table 1 do not apply. If
strain ageing is to be minimized, grade VE04 or VE05 should be
specified.
Drawing qualities are identified as follows:
- VE02 - Drawing quality
- VE03 - Deep drawing quality
- VE04 - Deep drawing quality aluminum killed (non-ageing)
- VE05 - Extra deep drawing quality (stabilized interstitial free)
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
