SAE AMS 5529G Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
 |
| Purchase Information |
| Use this form to request purchase information on SAE online subscriptions. |
|
|
Document SAE AMS 5529G is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
SAE AMS 5529G Document Information:
Title
Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
SAE International
Publication Date:
Jul 1, 2003
Scope:
Form:
This specification covers a corrosion-resistant steel in the form of
sheet and strip 0.0015 to
0.050 inch (0.038 to 1.27 mm) in nominal thickness.
Application:
These products have been used typically for parts such as springs
requiring corrosion resistance
and high strength up to 600 °F (316 °C), but usage is not
limited to such applications.
Strength of these cold-worked products will be impaired if parts are
welded during fabrication.
Certain design and processing procedures may cause these products to
become susceptible to
stress-corrosion cracking; ARP1110 recommends practices to minimize
such conditions.
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
