|
MODUK 61- 12 |
Wires, Cords and Cables, Electrical - Part 33 - Airframe Wires and Cables - Supplement 008 - Humididty-Resistant PTFE Polyamide Composite Cables Rated at 260 Degrees C-Issue 1 |
|
MODUK 61-12 PART 33 |
Wires, Cords and Cables, Electrical - Part 33: Airframe Wires and Cables in the Temperature Categories of 135 Degrees C, 150 Degrees C, 200 Degrees C and 260 Degrees C - Sectional Specification-Issue 3; 05.00 |
|
MODUK DEF STAN 00-00: PART 1 |
STANDARDS FOR DEFENCE PART 1: MOD UK STANDARDIZATION POLICY, ORGANIZATIONS AND IMPLEMENTATION-Interim; Issue 3 06/1999; Reprinted 10/29/2005 to Incorporate Amendment 1 |
|
MODUK DEF STAN 00-00: PT 3: SEC 4 |
Standards for Defence Part 3: Index of Standards for Defence Procurement Section 4: Index of Defence Standards and Defence Specifications-Issue 15; It Includes Changes up to SID News Serial 167 - October 1998; 01.99 |
|
MODUK DEF STAN 00-00: PT 3:SEC 1 |
Standards for Defence Part 3: Index of Standards for Defence Procurement Section 1: Preferred Standards for the Design and Procurement of Aerospace Vehicles and Equipments-Issue 13 (06.92) |
|
MODUK DEF STAN 00-00: PT 3:SEC 6 |
Standards for Defence Part 3: Index of Standards for Defence Procurement Section 6: Index of NATO Standardization Agreements and Allied Publicationss- Issue 12; 4.99 |
|
MODUK DEF STAN 00- 10 |
General Design and Manufacturing Requirements for Service Electronic Equipment-Issue 3; 10.86; Amendment 1; Cancelled without Replacement |
|
MODUK DEF STAN 00- 101: PART 1 |
Design Standards for Explosives Safety in MOD Ships and Submarines Part 1 Surface ships-Issue 1 03/2005; Supersedes DEF STAN 08-101: PART 1 and NES 183 |
|
MODUK DEF STAN 00- 13 |
Requirements for the Achievement of Testability in Electronic and Allied Equipment-Interim Issue 3; 06.94 |
|
MODUK DEF STAN 00- 18: PART 6 |
Avionic Data Transmission Interface Systems Part 6: Analogue Video Standard for Aircraft System Applications-Issue 2; 02/90; Amendment 2 |
|
MODUK DEF STAN 00- 18: PT 1:SEC 6 |
Avionic Data Transmission Interface Systems Part 1: Guide to Interface Systems Section 6: Guide to the Analogue Video Standard for Aircraft System Applications-Issue 2; 01.99 |
|
MODUK DEF STAN 00- 23 |
Infra Red Reflective (IRR) Requirements for Painting Military Equipment- Issue 3 |
|
MODUK DEF STAN 00- 25: PART 1 |
Human Factors for Designers of Equipment Part 1: Introduction-Issue 2 (09.87); Amendment 1 Corrections |
|
MODUK DEF STAN 00- 25: PART 10 |
Human Factors for Designers of Equipment Part 10: Controls- Interim Issue 1 (12.92) |
|
MODUK DEF STAN 00- 25: PART 11 |
Human Factors for Designers of Equipment Part 11: Design for Maintainability-Issue 1 (08.88) |
|
MODUK DEF STAN 00- 25: PART 12 |
Human Factors for Designers of Equipment Part 12: Systems-Issue 1 (07.89) |
|
MODUK DEF STAN 00- 25: PART 13 |
Human Factors for Designers of Equipment Part 13: Human Computer Interaction-Issue 1 (05.96) |
|
MODUK DEF STAN 00- 25: PART 14 |
Human Factors for Designers of Equipment - Military Land Vehicle Design-Issue 1 |
|
MODUK DEF STAN 00- 25: PART 15 |
Human Factors for Designers of Systems Part 15: Principles and Process-Issue 1:07/2004 |
|
MODUK DEF STAN 00- 25: PART 19 |
Human Factors for Designers of Systems Part 19: Human Engineering Domain Technical Guidance and Data-Issue 1:07.04 |
|
MODUK DEF STAN 00- 25: PART 2 |
Human Factors for Designers of Equipment Part 2: Body Size- Issue 2; Amendment 1 |
|
MODUK DEF STAN 00- 25: PART 20 |
Human Factors for Designers of Systems Part 20: Health Hazard Assessment Domain Technical Guidance and Data-Issue 1:07.04 |
|
MODUK DEF STAN 00-25: PART 3 |
Human Factors for Designers of Equipment Part 3: Body Strength and Stamina-Issue 2; 01.97; Amendment 1 |
|
MODUK DEF STAN 00-25: PART 4 |
Human Factors for Designers of Equipment Part 4: Workplace Design-Interim Issue 1 (08.91) |
|
MODUK DEF STAN 00- 25: PART 5 |
Human Factors for Designers of Equipment Part 5: Stresses and Hazards-Interim Issue 1 (05.92) |
|
MODUK DEF STAN 00- 25: PART 6 |
Human Factors for Designers of Equipment Part 6: Vision and Lighting-Issue 2; 01.97 |
|
MODUK DEF STAN 00-25: PART 7 |
Human Factors for Designers of Equipment Part 7: Visual Displays-Issue 2; 12.96: Corrigendum |
|
MODUK DEF STAN 00- 26 |
Guide to the Evaluation and Expression of the Uncertainties Associated with the Results of Electrical Measurements-Issue 2 (09.88) |
|
MODUK DEF STAN 00- 27 |
The Measurement of Impulse Noise from Military Weapons, Explosives and Pyrotechnics-Issue 2; 06.05 |
|
MODUK DEF STAN 00- 3 |
Design and Guidance for the Transportability of Equipment-Issue 3 (05.85); Amendment 2 |
|
MODUK DEF STAN 00- 35 |
Environmental Handbook for Defence Materiel-Issue 2 (03.96) |
|
MODUK DEF STAN 00- 35: PART 0 |
Environmental Handbook for Defence Materiel Part 0: Important Changes and Amendments, Revision Note and Historical Note-Issue 2 (03.96) |
|
MODUK DEF STAN 00- 35: PART 1 |
Environmental Handbook for Defence Materiel Part 1: Control and Management-Issue 3; 05.99: Amendment 1; This Standard is Progressively Superseding AvP35 and Supersedes DEF STAN 07-55 and DEF STAN 00-1 |
|
MODUK DEF STAN 00- 35: PART 2 |
Environmental Handbook for Defence Materiel Part 2: Specification of Service Environments-Superseded by DSTAN 00-35/2 Issue 2 (03.96) |
|
MODUK DEF STAN 00- 35: PART 3 |
Environmental Handbook for Defence Materiel Part 3: Environmental Test Methods-Issue 3; 5.99; Reprinted April 2000, Incorporating Amendment 1; This Standard is Progressively Supersedeing AvP35 and Supersedes DEF STAN 07-55 and DEF STAN 00-1 |
|
MODUK DEF STAN 00- 35: PART 4 |
Environmental Handbook for Defence Materiel Part 4: Natural Environments-Issue 3; 5.99; Reprinted April 2000, Incorporating Amendment 1; This Standard is Progressively Superseding AvP35 and Supersedes DEF STAN 07-55 and DEF STAN 00- 1 |
|
MODUK DEF STAN 00- 35: PART 5 |
Environmental Handbook for Defence Materiel Part 5: Induced Mechanical Environments-Issue 3: 05 1999:; Reprinted April 2000, Incorporating Amendment 1; This Defence Standard is Progressively Superseding AvP35 and Supersedes DEF STAN 07-55 and DEF STAN |
|
MODUK DEF STAN 00- 35: PART 6 |
Environmental Handbook for Defence Materiel Part 6: Induced Climatic, Chemical and Biological Environments-Issue 3: 04 2000; Amendment 1 |
|
MODUK DEF STAN 00- 40: PART 1 |
Reliability and Maintainability (R&M) Part 1: Management Responsibilities and Requirements for Programmes and Plans-Issue 5; 06.03 |
|
MODUK DEF STAN 00- 40: PART 2 |
Reliability and Maintainability Part 2: General Application Guidance on the Use of Part 1-Issue 2; 12.94; (ARMP-2) |
|
MODUK DEF STAN 00- 40: PART 3 |
MoD Practices and Procedures for Reliability and Maintainability Part 3: Application of National R and M Documents-Issue 1; 08.89; (ARMP-3) |
|
MODUK DEF STAN 00- 40: PART 4 |
Reliability and Maintainability (R&M) Part 4 (ARMP-4) Guidance for Writing NATO R&M Requirements Documents-Issue 2; 06.03 |
|
MODUK DEF STAN 00- 40: PART 6 |
Reliability and Maintainability Part 6: in-Service R & M-Issue 1 (12.88) (ARMP-6) |
|
MODUK DEF STAN 00-40: PART 7 |
Reliability and Maintainability (R&M) Part 7: (ARMP-7) NATO R&M Terminolgy Applicable to ARMPÁµs-Issue 1; 06.03 |
|
MODUK DEF STAN 00-40: PART 8 |
Reliability and Maintainability Part 8: Procurement of off - the - Shelf Equipment (ARMP - 8)-Issue 1; 07.92 |
|
MODUK DEF STAN 00- 41 |
Reliability and Maintainability MoD Guide to Practices and Procedures- Issue 3 (06.93) |
|
MODUK DEF STAN 00- 41: PART 3 |
MoD Practices and Procedures for Reliability and Maintainability Part 3: Reliability Prediction-Issue 2 (07.89) |
|
MODUK DEF STAN 00-41: PART 3(A) |
MoD Practices and Procedures for Reliability and Maintainability Part 3: Reliability Prediction Supplement A - Quality Factors-Issue 1 (12.84) |
|
MODUK DEF STAN 00- 42: PART 1 |
Reliability and Maintainability Assurance Guides Part 1: One- Shot Devices/Systems-Issue 1; 07.97 |
|
MODUK DEF STAN 00- 44: PART 1 |
Reliability and Maintainability Data Collection and Classification Part 1: Maintenance Data & Defect Reporting in the Royal Navy, the Army and the Royal Air Force-Issue 2 (06.95) |
|
MODUK DEF STAN 00-5: PART 3 |
Design Criteria for Reliability, Maintainability and Maintenance of Land Service Materiel Part 3: Electrical and Electronic Aspects-Issue 3; 02.79 |
|
MODUK DEF STAN 00- 52 |
General Requirements for Product Acceptance and Maintenance Test Specifications and Test Schedules-Issue 3 (09.91) |
|
MODUK DEF STAN 00- 54: PART 1 |
Requirements for Safety Related Electronic Hardware in Defence Equipment Part 1: Requirements-Interim; Issue 1; 03.99; Superseded by Def Stan 00-56:2004 |
|
MODUK DEF STAN 00- 55: PART 1 |
Requirements for Safety Related Software in Defence Equipment Part 1: Requirements-Issue 2 08/1997 |
|
MODUK DEF STAN 00-55: PART 2 |
Requirements for Safety Related Software in Defence Equipment Part 2: Guidance-Issue 2 08/1997: Erratum 08/1997 |
|
MODUK DEF STAN 00- 56 |
Hazard Analysis and Safety Classification of the Computer and Programmable Electronic System Elements of Defence Equipment-Interim Issue 1 (04.91) |
|
MODUK DEF STAN 00- 56: PART 1 |
Safety Management Requirements for Defence Systems Part 1 Requirements-Issue 3: 12.04; Together with DEF STAN 00-56 Part 2 supersedes Def Stan 00-54:1999 and 00-58:2000 |
|
MODUK DEF STAN 00- 56: PART 2 |
Safety Management Requirements for Defence Systems Part 2 Guidance on Establishing a Means of Complying with Part 1 THIS GUIDANCE IS NOT MANDATORY-Issue 3; 12.04; Together with DEF STAN 00-56 Part 1 superseded Def Stan 00-54:1999 and 00-58:2000 |
|
MODUK DEF STAN 00- 56: PART 2 DRAFT |
Safety Management Requirements for Defence Systems Containing Programmable Electronics Part 2: General Application Guidance-Issue 2 (Draft Only - This Must Not Be Regarded or Used as an Approved D Stan Document) |
|
MODUK DEF STAN 00- 6 |
Fording and Flotation Requirements for Combat and Support Ground Vehicles-Issue 3; 07.02 |
|
MODUK DEF STAN 00-60 PT 10 |
Integrated Logistic Support Part 10: Electronic Documentation-Issue 5;05.02; Supersedes DEF STAN 00-60 (Part 10)/Issue 4 Dated 18 August 2000 |
|
MODUK DEF STAN 00- 60: PART 0 |
Integrated Logistic Support Part 0: Application of Integrated Logistic Support (ILS)-Issue 6; 09.04 |
|
MODUK DEF STAN 00- 60: PART 1 |
Integrated Logistic Logistic Support Analysis (LSA) and Logistic Support Analysis Record (LSAR)-Issue 3; 09.04 |
|
MODUK DEF STAN 00- 60: PART 11 |
Integrated Logistic Support Part 11: Guidance on the Application of Electronic Documentation in an ILS Environment-Issue 2; 03.98 |
|
MODUK DEF STAN 00- 60: PART 2 |
Integrated Logistic Support Guide to the Application of LSA and LSAR-Issue 5; 05.02 |
|
MODUK DEF STAN 00- 60: PART 20 |
Integrated Logistic Support Part 20: Application of Supply Support Procedures-Issue 7 09/2004 |
|
MODUK DEF STAN 00- 60: PART 22 |
Integrated Logistic Support Part 22: Procedures for Codification-Issue 5; 07.03 |
|
MODUK DEF STAN 00- 71 |
Obsolescence Management-Issue 2; 01.01 |
|
MODUK DEF STAN 00- 970 : VOLUME 1 |
Design and Airworthiness Requirements for Service Aircraft Volume 1 - Aeroplanes Book 3 (Chapters 711 on and Parts 8 to 10)-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 0:VOL 1 |
List of Important Changes-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 0:VOL 2 |
List of Important Changes-Issue 1; 07.84; Amendment 12 |
|
MODUK DEF STAN 00- 970 :PT 1:VOL 1 |
General and Operational Requirements-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 1:VOL 2 |
General and Operational Requirements-Issue 1; 07.84; Amendment 12 |
|
MODUK DEF STAN 00- 970 :PT 2:VOL 1 |
Structural Strength and Design for Flight-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 2:VOL 2 |
Structural Strength and Design for Flight-Issue 1; 07.84; Amendment 12 |
|
MODUK DEF STAN 00- 970 :PT 3:VOL 1 |
Structural Strength and Design for Operation on Specified Surfaces-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 3:VOL 2 |
Structural Strength and Design for Operation on Specified Surfaces-Issue 1; 07.84; Amendment 12 |
|
MODUK DEF STAN 00-970 :PT 4:VOL 1 |
Design and Airworthiness Requirements for Service Aircraft Volume 1 - Aeroplanes Book 2 (Parts 4 to 6 and Chapters 700 to 710) Part 4: Detail Design and Strength of Materials-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 4:VOL 2 |
Detail Design and Strength of Materials-Issue 1; 07.84; Amendment 11; Amendment 12 |
|
MODUK DEF STAN 00- 970 :PT 6:VOL 1 |
Aerodynamics and Flying Qualities-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 7:VOL 1 |
Installations Chapter 711 on-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 :PT 7:VOL 2 |
Design and Airworthiness Requirements for Service Aircraft Volume 2 - Rotorcraft Book 3 (Parts 7 to 10) Part 7: Installations-Issue 1; 07.84; Amendment 12 |
|
MODUK DEF STAN 00- 970 :PT 9:VOL 1 |
Flight Tests - Handling-Issue 1; 12.83; Amendment 14 |
|
MODUK DEF STAN 00- 970 VOL2 PTS 4-6 |
Design and Airworthiness Requirements for Service Aircraft Volume 2 - Rotorcraft Book 2 (Parts 4 to 6)-Issue 1; 07.84; Amendments 2 Thru 7 and 9 Thru 11 |
|
MODUK DEF STAN 00- 970: V2 P0-3 |
Design and Airworthiness Requirements for Service Aircraft Volume 2 - Rotorcraft Book 1 (Parts 0 to 3)-Issue 1; 07.84; Amendment 12 |
|
MODUK DEF STAN 00- 970:PT 0 |
Design and Airworthiness Requirements for Service Aircraft Procedures for Use, Content and Definitions-Issue 2 |
|
MODUK DEF STAN 01- 8 |
Steel Specifications (Group System)-Issue 1; 08.85; Supersedes DEF-13- B |
|
MODUK DEF STAN 02- 127 |
Access Fittings and Equipment-Issue 1; 04.00; Incorporating NES 127 Category 2; This Standard is Provided for Information Purpose Only and Shall Not Be Used in Any Contract, Tender or Order Unless Otherwise Specified |
|
MODUK DEF STAN 02- 157: PART 1 |
Requirements for Deck Coverings Part 1 General Requiements-Issue 1; 04/2000; Incorporating NES 157 Category 2: Issue 2: 11/1989 |
|
MODUK DEF STAN 02- 157: PART 2 |
Requirements for Deck Coverings Part 2 Deck Preparation & Laying Procedures-Issue 1; 04/2000; Incorporating NES 157 Category 2: Issue 2: 11/1989 |
|
MODUK DEF STAN 02- 314 |
Compressed Air Systems-Issue 3 10/2005; Category 2; Supersedes NES 314:1982 and DEF STAN 08-104:2000 |
|
MODUK DEF STAN 02- 318 |
Non-Transportable High Pressure Air and Nitrogen cylinders Periodic Inspection, Testing & Maintenance-Issue 1: 04/00; Incorporating NES 318 Category 2; Issue 3: 01/99 |
|
MODUK DEF STAN 02- 324: PART 1 |
Requirements for Hydraulic Systems Part 1 General-Issue 1: 04/00; Incorporating NES 324 Category 2; Issue 3: 08/99 |
|
MODUK DEF STAN 02- 341: PART 1 |
Requirements for Cleaning of Items, Components and Equipment for Fluid Systems Part 1 Cleaning-Issue 1: 04.00; Incorporating NES 341 Category 2: Issue 2: 05/89 |
|
MODUK DEF STAN 02- 587: PART 1 |
Requirements for Lighting Systems Part 1: Surface Ships- Issue 2: 02/2001; Incorporating NES 587 Category 3 |
|
MODUK DEF STAN 02- 599 |
Policy Requirements and Design Guidance for Alarm and Warning Systems-Issue 1: 04/2000; Incorporating NES 599 Issue 4 Publication Date November 1992 |
|
MODUK DEF STAN 02- 713 |
Determination of the Toxicity Index of the Products of Combustion from Small Specimens of Materials-Issue 1; 04.00; Incorporating NES 713 Category 2; This Standard is Provided for Information Purpose Only and Shall Not Be Used in Any Contract, Tender o |
|
MODUK DEF STAN 02- 719 |
Sea Water Systems for HM Surface Ships-Issue 1: 04/2000; Incorporating NES 719 Category 2 Issue 2 Publication Date October 1981 |
|
MODUK DEF STAN 02- 747: PART 2 |
Requirements for Nickel Aluminium Bronze Castings and Ingots Part 2: Nickel Aluminium Bronze Naval Alloy Ingots and Sand Castings with Welding Permitted to the Wetted Surface-Issue 2; 11.04; Category 2 |
|
MODUK DEF STAN 02- 833: PART 2 |
Requirements for Nickel Aluminium Bronze Part 2: Forgings, Forging Stock, Rods and Sections-Issue 1; 04.00; Incorporating NES 833 Part 1 Category 2; This Standard is Provided for Information Purpose Only and Shall Not Be Used in Any Contract, Tender or |
|
MODUK DEF STAN 02- 863 |
Requirements for the Classification, Dimensions, Tolerances and General Standards of Acceptance for Copper and Nickel Alloy Castings-Issue 1; 04/2000; Incorporating NES 863 Category 2 Issue 2 Publication Date January 2000 |
|
MODUK DEF STAN 02- 872: PART 1 |
Procedures for First Level Nickel Aluminium Bronze Castings Part 1 Policy-Issue 1; 12.02; Category 1 |
|
MODUK DEF STAN 03- 10 |
Electro Deposition of Nickel and Chromium-Issue 2; 03.87 |
|
MODUK DEF STAN 03- 11 |
Phosphate Treatment of Iron and Steel-Issue 4; 12.03 |
|
MODUK DEF STAN 03- 14 |
Electro-Deposition of Chromium for Engineering Purposes-Issue 3: 02.05; Supersedes Def 160:1967 |
|
MODUK DEF STAN 03- 17 |
Electro - Deposition of Gold-Issue 02; 10.92 |
|
MODUK DEF STAN 03- 18 |
Chromate Conversion Coatings (Chromate Filming Treatments) Grades: Standard and Brushing for Aluminium and Aluminium Alloys-Issue 3; 06.03 |
|
MODUK DEF STAN 03- 19 |
Electro-Deposition of Cadmium-Issue 3: 10/2005 |
|
MODUK DEF STAN 03- 2 |
Cleaning and Preparation of Metal Surfaces-Issue 4: 10/2005 |
|
MODUK DEF STAN 03- 20 |
Electro-Deposition of Zinc-Issue 3: 02.05; Supersedes DTD 903D:1966 |
|
MODUK DEF STAN 03- 24 |
Chromic Acid Anodising of Aluminium and Aluminium Alloys-Issue 4: 12.03 |
|
MODUK DEF STAN 03- 25 |
Sulfuric Acid Anodising of Aluminium and Aluminium Alloys-Issue 4; 12.03 |
|
MODUK DEF STAN 03- 26 |
Hard Anodizing of Aluminium and Aluminium Alloys-Issue 2; 09.88; Superseded by BS 5599 |
|
MODUK DEF STAN 03- 27 |
Electro-Deposition of Nickel for Engineering Purposes-Issue 3: 10/2005 |
|
MODUK DEF STAN 03- 28: PART 1 |
Physical Vapour Deposition of Metals Part 1: Physical Vapour Deposition of Aluminium for Protection Against Corrosion-Issue 3; 12.03 |
|
MODUK DEF STAN 03- 30 |
Treatments for the Protection for Metal Parts of Service Stores and Equipment against Corrosion-Issue 3: 02.05 |
|
MODUK DEF STAN 03-32: PART 1 |
Pre-Treatment and Painting of Vehicles, Engineering Equipment and Components Part 1: General Requirements-Issue 4; 07.05 |
|
MODUK DEF STAN 03-32: PART 2 |
Pre-Treatment and Painting of Vehicles, Engineer Equipment and Components Part 2: Systems for Ferrous Armour-Issue 4; 07.05 |
|
MODUK DEF STAN 03-32: PART 3 |
Pretreatments and Painting of Vehicles, Engineer Equipment and Components Part 3: Systems for Aluminum Alloy for Armour and Structural Applications-Issue 4; 07.05 |
|
MODUK DEF STAN 03-32: PART 4 |
Pre-Treatment and Painting of Vehicles, Engineer Equipment and Components Part 4: Systems for Ferrous Metal, Excluding Armour-Issue 4; 07.05 |
|
MODUK DEF STAN 03-32: PART 5 |
Pre-Treatment and Painting of Vehicles, Engineer Equipment and Components Part 5: Systems for Non-Ferrous Metals Excluding Aluminum Alloy for Armour and Structural Applications-Issue 4; 07.05 |
|
MODUK DEF STAN 03-32: PART 6 |
Pre-Treatment and Painting of Vehicles, Engineer Equipment and Components Part 6: Systems for Specialised Vehicles, Components and Substrates Including Distinctive Colours-Issue 4; 07.05 |
|
MODUK DEF STAN 03- 33 |
Chromate Passivation of Cadmium and Zinc Surfaces-Issue 01; 11.93; Supersedes DEF-130 |
|
MODUK DEF STAN 03- 34 |
Arc Welding of Ferrous Armour-Issue 3; 09.03 |
|
MODUK DEF STAN 03- 35 |
Cutting Processes for Armour Plate (3-160mm)-Issue 1; 10.01; Reprinted December 2002 Incorporating Amendment 1 |
|
MODUK DEF STAN 03- 36 |
Guidance to the Use of Cadmium Alternatives in the Protective Coating of Defence Equipment-Issue 1: 01.05 |
|
MODUK DEF STAN 03- 37 |
Classification for the Non- Destructive Examination of Castings for Military Equipment-Issue 2 04/2005 |
|
MODUK DEF STAN 03- 4 |
Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa-Issue 4; 01.98 |
|
MODUK DEF STAN 03- 5 |
Autocatalytic (Electroless) Nickel Coating of Metals-Issue 03; 02.95 |
|
MODUK DEF STAN 03- 8 |
Electro - Deposition of Tin-Issue 02; 10.92 |
|
MODUK DEF STAN 05- 10 |
Drawing Procedure-Issue 04; 07.90; Supersedes DEF-33-A |
|
MODUK DEF STAN 05- 101: PART 1 |
Proof of Ordnance, Munitions, Armour and Explosives Part 1 Requirements-Issue 1 05/2005; Supersedes DEF STAN 05-61: PART 11, DEF STAN 05-61: PART 13, DEF STAN 05-61: PART 14, DEF STAN 05-61: PART 17, DEF STAN 13- 92 |
|
MODUK DEF STAN 05- 101: PART 2 |
Proof of Ordnance, Munitions, Armour and Explosives Part 2 Guidance-Issue 1 05/2005; Supersedes DEF STAN 05-61: PART 11, DEF STAN 05-61: PART 13, DEF STAN 05-61: PART 14, DEF STAN 05-61: PART 17, DEF STAN 13- 92 |
|
MODUK DEF STAN 05- 123 |
Technical Procedures for the Procurement of Aircraft, Weapon and Electronic Systems-Issue 1 (08.83); Amendment 64 |
|
MODUK DEF STAN 05- 123 : PART 0 |
General Information-Issue 1 (08.83); Amendment 64 |
|
MODUK DEF STAN 05- 123 : PART 1 |
Approval Procedure and Responsibilities-Issue 1 (08.83); Amendment 62 |
|
MODUK DEF STAN 05- 123 : PART 3 |
Technical Procedures for the Procurement of Aircraft, Weapons and Electronic Systems Part 3 Control of Designs and Design Records-Issue 2: 06.05 |
|
MODUK DEF STAN 05- 123 : PART 4 |
Supply of Technical Information-Issue 1 (08.83); Amendment 64 |
|
MODUK DEF STAN 05-123 : PART 5 |
Production Procedures-Issue 1 (08.83); Amendment 64 |
|
MODUK DEF STAN 05- 123 PART 2 |
Technical Procedures for the Procurement of Aircraft, Weapons and Electronic Systems Part 2 Development Procedures-Issue 2 |
|
MODUK DEF STAN 05- 123:PART 0 |
Technical Procedures for the Procurement of Aircraft, Weapons and Electronic Systems Part 0 General Information-Issue 2 11/04; Reprinted 22 July 2005 Incorporating Amendment 2 |
|
MODUK DEF STAN 05- 123:PART 1 |
Technical Procedures for the Procurement of Aircraft, Weapons and Electronic Systems Part 1 - Approval Procedure and Responsibilities-Issue 2 10/2004 |
|
MODUK DEF STAN 05- 124 |
Procedures for the Procurement of Aircraft Engines and Their Accessories-Issue 1 (07.92); Amendment 2 |
|
MODUK DEF STAN 05- 125 |
Technical Procedures for Post Design Services (Electronics)-Issue 2 (01.90); Amendment 1 |
|
MODUK DEF STAN 05- 125 : CHAPTER 1 |
Outline of PDS Organisation-Issue 2 (01.90); Amendment 1 |
|
MODUK DEF STAN 05- 125 : CHAPTER 6 |
Fault Investigation Procedure-Issue 2 (01.90); Amendment 1 |
|
MODUK DEF STAN 05- 125 : CHAPTER 7 |
Modification and Change Procedure-Issue 2 (01.90); Amendment 1 |
|
MODUK DEF STAN 05- 125 : CHAPTER 8 |
Forms: Description of Use-Issue 2 (01.90); Amendment 1 |
|
MODUK DEF STAN 05- 34 |
Marking of Service Materiel-Issue 02; 05.84; Amendment 1; Supersedes Def Stan 05-07 & 53-2 |
|
MODUK DEF STAN 05- 42 |
Particulate Contamination Classes for Fluids in Hydraulic Systems-Issue 02; 05.82 |
|
MODUK DEF STAN 05- 53 |
Identification of Drawings for Their Retrieval-Issue 1 (01.81); Amendment 1 |
|
MODUK DEF STAN 05- 57 |
Configuration Management of Defence Materiel-Issue 5; 06/05 |
|
MODUK DEF STAN 05- 61 |
Quality Assurance Procedural Requirements-Issue 1; 06.83; Superseded by DSTAN 05-61 Parts 1 to 10 |
|
MODUK DEF STAN 05- 61: PART 1 |
Quality Assurance Procedural Requirements Part 1 Concessions-Issue 4: 04/2004 |
|
MODUK DEF STAN 05- 61: PART 11 |
Quality Assurance Procedural Requirements Part 11: Proof Sentencing-Issue 2; 04.92; Amendment 1, Superseded by DEF STAN 05-101: PART 1, DEF STAN 05-101: PART 2, DEF STAN 05-101: PART 3 |
|
MODUK DEF STAN 05- 61: PART 3 |
Quality Assurance Procedural Requirements Part 3: Quality Assurance of Sub-Contract Work-Issue 1; 06.83; Reprinted 9 August 1996 Incorporates Amendment 1; Superseded by DEF STAN 05-61: Part 1 Issue 3 |
|
MODUK DEF STAN 05- 61: PART 4 |
Quality Assurance Procedural Requirements Part 4: Contractors Working Parties-Issue 3; 10.02 |
|
MODUK DEF STAN 05- 61: PART 8 |
Quality Assurance Procedural Requirements Part 8: Movement and Storage of Ordnance, Munitions and Explosives (OME) under "Red Card" Restriction- Issue 3; 05.05; Supersedes QTR/10: 1983 |
|
MODUK DEF STAN 05- 61: PART 9 |
Quality Assurance Procedural Requirements Part 9: Independent Inspection Requirements for Safety Critical Items-Issue 03; 10.02 |
|
MODUK DEF STAN 05- 91 |
Quality System Requirements for Design/Development, Production, Installation and Servicing-Issue 2; 04.95; Reprinted on the 23rd March 2001 Incorporating Amendment 1; Adoption of ISO 9001:2000 with Supplementary Requirements |
|
MODUK DEF STAN 05- 92 |
Quality System Requirements for Production, Installation and Servicing- Issue 2; 04.95; Reprinted on the 23rd March 2001 Incorporating Amendment 1; Adoption of ISO 9002: 1994 or ISO 9001: 2000 with Supplementary Requirements |
|
MODUK DEF STAN 05- 95 |
Quality System Requirements for the Design, Development, Supply and Maintenance of Software-Issue 3 (06.95); |
|
MODUK DEF STAN 05- 97 |
Requirements for Deliverable Quality Plans-Issue 1; 08.95; Supersedes DEF STAN 05-61: Part 16, and DEF STAN 05-62: Part 1 |
|
MODUK DEF STAN 05- 99 |
Managing Government Furnished Assets in Industry-Issue 2: January 2004 |
|
MODUK DEF STAN 10- 13 |
Steel Forgings for Guns-Issue 4; 04.05; Supersedes Def Stan 05-1/1 dated 20 March 1967 |
|
MODUK DEF STAN 13- 129 |
Requirements for Explosives Hazard Data Sheets for MoD Use-Issue 1 (11.92) |
|
MODUK DEF STAN 13- 130 |
Magnesium Powder Types: Blown and Cut-Issue 1 (10.92); (Reprinted January 1995 - Incorporating Amendment 1) |
|
MODUK DEF STAN 13- 131 |
Ordnance Board Safety Guidelines for Weapons and Munitions-Issue 2; 06.97 |
|
MODUK DEF STAN 13- 47 |
Steel for Shell Bodies and Proof Shot-Issue 4; 02.05 |
|
MODUK DEF STAN 13- 500 |
TATB (Triaminotrinitrobenzene), Type A-Issue 2 (03.95) |
|
MODUK DEF STAN 13-96: PART 1 |
Lotting and Batching of Ammunition Part 1: General Requirements- Issue 3 (04.94) |
|
MODUK DEF STAN 13- 98 |
Requirements for the Provision of General Munitions Technical Data for Minor Projects-Issue 4: 8.2002 |
|
MODUK DEF STAN 21- 12 PART 1 |
Master Records Indexes Part 1: Requirements for Preparation of MRI Using MRI CONSTRUCTOR Software-Issue 2; 02.03; Category 3 |
|
MODUK DEF STAN 21- 3 |
The Requirement for Assessing Transient Coupled Energy into Stores Containing Electro-Explosive Devices (EED)-Issue 1: 4/2000; Incorporating NES 1003 Category 1 Issue 2: 1/1993 |
|
MODUK DEF STAN 21- 5 |
Code of Practice for Protective Finishes-Issue 2: 12.04 |
|
MODUK DEF STAN 23- 6 |
Technology Guidance for Military Logistics Vehicles-Issue 4 11/2005 |
|
MODUK DEF STAN 23- 7 |
Guide to the Common Technical Requirements for Armoured Fighting Vehicles and Their Derivatives-Issue 1 (04.95) |
|
MODUK DEF STAN 23- 8 |
Winterization - Military Logistic Vehicles, Towed Equipment and Mechanical Handling Equipment-Issue 2; 01.01 |
|
MODUK DEF STAN 40- 14 |
Lifting Tackle-Interim Issue 1; 07.92 |
|
MODUK DEF STAN 44-2: PART 1 |
Desiccant Containers, Dehumidifier Part 1: Guide to the Use of Desiccants-Issue 5 09/2004 |
|
MODUK DEF STAN 47- 32 |
Rubber Hose and Hose Assemblies for Hydraulic Systems-Issue 1; 10.02; Supersedes DEF STAN 47-31/Issue 1 dated 29 September 1997 and DEF STAN 47- 2/Issue 4 dated 29 August 1997 |
|
MODUK DEF STAN 53- 10 |
Pins, Cotter, Split-Issue 2; 03.76; Amendment 2 |
|
MODUK DEF STAN 53- 15 |
Clamps, Loop (Rigid)-Issue 2; 06.76; Amendment 1 |
|
MODUK DEF STAN 53- 17 |
Washers, Flat, Steel - Metric-Issue 3; 04.75 |
|
MODUK DEF STAN 53- 18 |
Bolts, Machine, Steel, Hexagon Head, Metric (Coarse Pitch Precision Bolts)-Issue 3; 02.76; Amendment 1 |
|
MODUK DEF STAN 53- 20 |
Rings, Retaining (Circlips)-Issue 2; 02.80 |
|
MODUK DEF STAN 53- 21 |
Screws, Machine, Steel, Hexagon Head, Metric (Coarse Pitch Precision Screws)-Issue 3; 03.76; Amendment 1 |
|
MODUK DEF STAN 53- 23 |
Screws, Machine, Steel, Slotted Head, Metric (Coarse Pitch)-Issue 2; 10.72 |
|
MODUK DEF STAN 53- 25 |
Screws, Socket Head, Steel - Metric (Course Pitch, Cap Head)-Issue 1; 06.70; Amendment 2 |
|
MODUK DEF STAN 53- 27 |
Nuts, Plain, Hexagon, Steel, Metric (Coarse Pitch Precision Nuts)-Issue 3; 09.77 |
|
MODUK DEF STAN 53- 31: PART 2 |
Washers for Locking Purposes Part 2: Washer, Lock, Inch (Single Coil, Double Coil, and Shakeproof)-Issue 1; 09.74; Amendment 2 |
|
MODUK DEF STAN 53- 31: PART 3 |
Washers for Locking Purposes Part 3: Washers, Lock, Metric (Single and Double Coil)-Issue 2; 09.77 |
|
MODUK DEF STAN 53- 31: PART 4 |
Washers for Locking Purposes Part 4: Washers, Spring Tension, Metric (Crinkle Washers)-Issue 2; 06.73; Amendment 1 |
|
MODUK DEF STAN 53- 32 |
Guide to the Methods of Locking Screwed Fasteners-Issue 2; 03.80; Corrigendum |
|
MODUK DEF STAN 53- 41 |
Screws, Machine, Steel, Hexagon Head, UNC-Issue 2; 02.81 |
|
MODUK DEF STAN 53- 44 |
Pins, Straight, Headed Steel Metric-Issue 1; 02.72 |
|
MODUK DEF STAN 53- 57 |
Screws, Machine, Steel, Hexagon Head, UNF-Issue 1; 01.73; Amendment 1 |
|
MODUK DEF STAN 53- 80 |
Studs Welding, Metric-Issue 1; 07.76 |
|
MODUK DEF STAN 53- 82 |
Inserts, Screw Thread, Metric Coiled Wire Thread-Issue 1; 02.77; Amendment 7 |
|
MODUK DEF STAN 53- 86 |
Pins, Spring, Steel (Metric)-Issue 1; 10.79 |
|
MODUK DEF STAN 53- 97 |
Pins, Spring (Imperial)-Issue 1; 10.82 |
|
MODUK DEF STAN 59- 100: PART 1 |
Fuse-Holders, Carriers and Bases Electrical Fuse (Block and Extractor Post Types) Part 1: Specifications-Issue 3; 08.95 |
|
MODUK DEF STAN 59- 36 |
Selection of Electronic and Electrical Components for Use in Defence Equipment-Interim; Issue 5; 08.95; Reprinted November 1996 to Incorporate Amendment 1; Supersedes DSTAN 05-37/Issue 2 Dated 3 February 1989 |
|
MODUK DEF STAN 59- 40: PART 8 |
Inter-Circuit Terminations Part 8: Terminal Blocks, Taper Socket and Terminals, Taper Pin Electrical Sectional Specification Codification Service Nomenclature: Terminals, Taper Receptacle, Electrical-Issue 2; 08.91 |
|
MODUK DEF STAN 59- 41: PART 1 |
Eletromagnetic Compatibility Part 1 Introduction and Guide to the Specification and Selection of EMC Requirements-Issue 7; 12.02 |
|
MODUK DEF STAN 59- 41: PART 2 |
Electromagnetic Compatibility Part 2 Management and Planning Procedures-Issue 5; 12.02 |
|
MODUK DEF STAN 59- 41: PART 3 |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PART 4 |
Electromagnetic Compatibility Part 4: Large Equipment Testing- Issue 3 (01.96) |
|
MODUK DEF STAN 59-41: PART 5 |
Electromagnetic Compatibility Part 5 Performance Specification for Specialised EMC Test Equipment-Issue 3; 02.03 |
|
MODUK DEF STAN 59- 41: PART 6 |
Electromagnetic Compatibility Part 6: Code of Practice for Military Vehicles Installation Guidelines-Issue 1 (08.94) |
|
MODUK DEF STAN 59- 41: PART 7 |
Electromagnetic Compatibility Part 7: Code of Practice for HM Ships Installation Guidelines-Issue 1 (11.95); |
|
MODUK DEF STAN 59- 41: PT 3: SUPP A |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement A: Test Method DCE01 Conducted Emission on Primary Power Lines 20 Hz - 150 MHz-Issue 5; 10.95 |
|
MODUK DEF STAN 59-41: PT 3: SUPP B |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement B: Test Method DCE02 Conducted Emission on Control Signal and Power Lines 20 Hz - 150 MHz-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP C |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement C: Test Method DCE03 Exported Transients Power Lines-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP D |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement D: Test Method DRE01 Radiated Emissions E Field 14 kHz - 18 GHz-Issue 5 (10.95) |
|
MODUK DEF STAN 59- 41: PT 3: SUPP E |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement E: Test Method DRE02 H Field Radiation 20 Hz - 50 kHz-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP F |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement F: Test Method DRE03 Radiated Emissions Installed Antenna 1.6 MHz - 76 MHz-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP G |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement G: Test Method DCS01 Conducted Susceptibility, Primary Power Lines 20 Hz - 50 kHz-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP H |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement H: Test Method DCS02 Conducted Susceptibility, Power Control and Signal Lines 50 kHz - 400 MHz-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP J |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement J: Test Method DCS03 Conducted Susceptibility, Control and Signal Lines 20 Hz - 50 kHz-Issue 5; 10.95 |
|
MODUK DEF STAN 59-41: PT 3: SUPP K |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement K: Test Method DCS04 Imported Transient Susceptibility (Aircraft)-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP L |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement L: Test Method DCS05 Externally Generated Transients (Ships)-Issue 1; 07.93; Supersedes DEF STAN 59-41: Part 3 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP N |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement N: Test Method DCS07 Imported Short Transient Susceptibility (Land Service)-Issue 2; 09.94; Superseded by DEF STAN 59-41: Part 3: Supp L - 1995 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP Q |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement Q: Test Method DCS09 Imported Lightning Transients Susceptibility (Aircraft)-Issue 5 (10.95) |
|
MODUK DEF STAN 59- 41: PT 3: SUPP R |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement R: Test Method DCS10 Electrostatic Discharge (Aircraft)-Issue 5 (10.95) |
|
MODUK DEF STAN 59- 41: PT 3: SUPP S |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement S: Test Method DCS11 Imported Long Transient Susceptibility - Power Lines (Sea Systems)-Issue 5 (01.96) |
|
MODUK DEF STAN 59- 41: PT 3: SUPP T |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits-Supplement T; Issue 6; 02.98; Supplement T: Test Method DCS12 Imported Low Frequency Transient Susceptibility - Power Lines (Sea Systems) |
|
MODUK DEF STAN 59- 41: PT 3: SUPP V |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement V: Test Method DRS02 Radiated Susceptibility E Field, 14kHz - 18GHz-Issue 1; 07.93; Supersedes Def Stan 59-41: Part 3 |
|
MODUK DEF STAN 59- 41: PT 3: SUPP W |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Supplement W: Test Method DMFS01 Magnetostatic Field Susceptibility-Issue 5; 10.95 |
|
MODUK DEF STAN 59- 41:PT 3:SEC 1 |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Section 1: Man Worn, Man Portable Equipment-Issue 2; 04.99 |
|
MODUK DEF STAN 59- 41:PT 3:SEC 3 |
Electromagnetic Compatibility Part 3: Technical Requirements Test Methods and Limits Section 3: LRU and Sub Systems (Including Land Vehicle Installed Antenna Test)-Issue 1; 05.03 |
|
MODUK DEF STAN 59- 42: PART 1 |
Heat Shrink Solder Sheaths Part 1: Requirements and Test Methods for Capability Approval-Issue 1; 03.90 |
|
MODUK DEF STAN 59- 47 |
Conformal Coatings for Panels, Printed Circuit and Panels, Electronic Circuit-Issue 4; 04.91 |
|
MODUK DEF STAN 59- 48: PART 4 |
Panels, Printed Circuit of Assessed Quality: General Requirements for Printed Wired Boards with Discretely Wired Layers-Issue 3; 02.90 |
|
MODUK DEF STAN 59- 59 |
Electrical/Electronic Components for Defence Use Services Qualified Products List Including Components of Assessed Quality-Issue 6; 07.91; Amendment 5 |
|
MODUK DEF STAN 59- 61: 80/001 |
Semiconductor Device Detail Specification-Issue 1 (09.77) |
|
MODUK DEF STAN 59- 71: PART 1 |
Crimped Electrical Connectors for Copper Conductors Part 1: General Requirements-Issue 2 (10.93) |
|
MODUK DEF STAN 59- 96: PART 1 |
Fuse-Links Electrical Part 1: Specifications-Issue 2; 08.95 |
|
MODUK DEF STAN 59- 97 |
Heat Shrinkable Insulation Materials Part 1: General Requirements, Tests and Test Methods for Capability Approval. Sleeving (Excluding Dual Wall) Sleeves Binding and/or Identification Moulded Shapes (Excluding Screened Shapes) Adhesive Compatibility (C |
|
MODUK DEF STAN 61- 12: PART 0 |
Wires Cords and Cables Electrical - Metric Units Part 0: General Requirements and Test Methods for Qualification Approval Generic Specification- Issue 1; 11.92; Amendment 1; Amendment 2; Amendment 3 |
|
MODUK DEF STAN 61- 12: PART 18 |
Wires, Cords and Cables Electrical - Metric Units Part 18: Equipment Wires, Limited Fire Hazard-Issue 4; 01.95; Amendment 1; Amendment 2; Amendment 3 |
|
MODUK DEF STAN 61- 12: PART 21 |
Wires, Cords, and Cables, Electrical-Metric Units Part 21: Wires and Cables, Lightweight, Extruded Insulation, 135 Degrees C Tin Plated, and 150 Degrees C Silver Plated Conductors-Issue 2; 11.85; Amendment 3 |
|
MODUK DEF STAN 61- 12: PART 25 |
Wires, Cords and Cables Electrical Metric Units Part 25: Cables Electrical Limited Fire Hazard, up to Conductor Size 2.5sq mm Cross Sectional Area- Issue 2 (04.92); Amendment 4 |
|
MODUK DEF STAN 61- 12: PART 26 |
Wires, Cords and Cables, Electrical Part 26: Wires and Cables Electrical, Dual Extruded Insulation Type Olefin/Vinylidene-Fluoride and Screened and Jacketed - Sectional Specification-Issue 3; 01.01; Document Reprinted 12 October 2001 to Incorporate Ame |
|
MODUK DEF STAN 61- 12: PART 29 |
Wires, Cords, and Cables, Electrical-Metric Units Part 29: Wires and Cables, Extruded Insulation, Types ETFE and ETFE "CANCELLED" Metsheath 135 Degrees C Tin Plated, and 150 Degrees C Silver Plated Conductors-Issue 1 (01.87); Amendment 2 |
|
MODUK DEF STAN 61- 12: PART 31 |
Wires, Cords, and Cables, Electrical, Metric Units Part 31: Sheaths Limited Fire Hazard-Issue 1 (04.90); Amendment 1 |
|
MODUK DEF STAN 61-12: PART 33 |
Wires, Cords and Cables, Electrical Part 33 Airframe Wires and Cables in the Temperature Categories of 135ÁøC, 200ÁøC and 260ÁøC-Issue 5: 08/2005 |
|
MODUK DEF STAN 61- 12: PART 6 |
Wires, Cords, and Cables, Electrical-Metric Units Part 6: Polyvinyl Chloride (PVC), Polyethylene, or Silicone Rubber Insulated Equipment Wires-Issue 5; 01.82; Amendment 1 |
|
MODUK DEF STAN 61-12: PART 8 |
Wires, Cords and Cables Electrical - Metric Units Part 8: PTFE Insulated Equipment Wires-Issue 3; 01.95 |
|
MODUK DEF STAN 61- 12:PT 33 SUPP001 |
Wires, Cords and Cables, Electrical Airframe Wires and Cables Part 33 Airframe Wires and Cables Supplement 001 Cross-Linked ETFE Insulated Cables Rated at 135ÁøC and 150ÁøC-Issue 2; 11.02; Incorporating Amendment 2; Reprinted 30 January 2004 |
|
MODUK DEF STAN 61-5: PART 1 |
Electrical Power Supply Systems Below 650 Volts Part 1: Terminology and Definitions-Issue 3 (08.92) |
|
MODUK DEF STAN 61-5: PART 4 |
Electrical Power Supply Systems below 650 Volts Part 4 Power Supplies in HM Ships-Issue 3: 01.05 |
|
MODUK DEF STAN 61- 5: PART 6 |
Electrical Power Supply Systems Below 650 Volts Part 6: 28 Volt dc Electrical Systems in Military Vehicles-Issue 5 (10.90); Amendment 1 |
|
MODUK DEF STAN 61- 5: PT 3: SEC 1 |
Electrical Power Supply Systems Below 650 Volts Part 3: Distribution and Protection Requirements Section 1: Earthing-Issue 2 (08.92) |
|
MODUK DEF STAN 61-7: PART 1 |
Identification of Electrical and Electronic Systems Wiring and Components Part 1: Colour Coding and Marking for Polarity and Phase Distinction in Electrical Systems-Issue 6; 09.90 |
|
MODUK DEF STAN 61-7: PART 2 |
Identification of Electrical and Electronic Systems, Wiring and Components Part 2: Marking Code for Electrical and Electronic Equipment-Issue 3; 05.91 |
|
MODUK DEF STAN 61-9: PT 1: SUPP 8 |
Battery, Secondary - Portable, Lead-Acid Type 12V, 50 Ah (Fully Dry Charged) No 5, MK 1 (UK/2HN)-Issue 1 (04.76); Amendment 7 |
|
MODUK DEF STAN 62- 4 |
Lamps, Nuclear (Gaseous Tritium Light Sources)-Issue 4; 08.92 |
|
MODUK DEF STAN 68- 10 |
Corrosion Preventive, Water Displacing NATO Code: C-634 Joint Service Designation: PX-24-Issue 5; 04.03 |
|
MODUK DEF STAN 75- 5 |
Tape, Pressure-Sensitive Adhesive, Type QX (Water-Reistant, Aluminium Foil) Grade 1 and Grade 2-Issue 2 |
|
MODUK DEF STAN 79- 17 |
Compound, Cleaning, Foaming, for Aircraft Surfaces-Issue 2 8/98; Reprinted February 6, 2004; Incorporating Amendment 1 |
|
MODUK DEF STAN 80- 109 |
Varnish RD 1177 for Armaments Type QX-Issue 1; 03.85; Amendment 3 |
|
MODUK DEF STAN 80- 138 |
Varnish, Polyurethane, Two-Pack Types: Matt; Gloss-Issue 2; 03.99 |
|
MODUK DEF STAN 80- 15 |
Paint, Pre-Treatment Primer (Etching Primer) Types: Brushing (Base and Acid Component) Spraying (Base and Acid Component)-Issue 2 (09.90) |
|
MODUK DEF STAN 80- 151 |
Paint, Finishing, for Interior Decks and Dadoes Types: Brushing Spraying-Issue 1; 08.91; Reprinted 11 November 1996 to Incorporate Amendment No.1; Supersedes DGS 1035 Dated January 1979 |
|
MODUK DEF STAN 80- 152 |
Paint, System, Epoxide, Stoving Types: Semi-Gloss; Gloss-Issue 2; 03.99 |
|
MODUK DEF STAN 80- 161 |
Paint, Finishing, Spraying, Epoxy, Multi-Pack-Issue 2: 9.2002; |
|
MODUK DEF STAN 80- 206 |
Paint, Priming, Zinc Phosphate, Non Aircraft Use, Low VOC Single or Multi-Pack-Issue 2; 04.03 |
|
MODUK DEF STAN 80- 207 |
Paint, Priming, Zinc Chromate, Non Aircraft Use, Low VOC Single or Multi-Pack-Issue 2; 04.03 |
|
MODUK DEF STAN 80- 208 |
Paint Finishing, Polyurethane Multi-Pack, Matt, IRR, Chemical Agent Resistant, Non Aircraft Use, Low VOC.-Issue 3: 12/2005 |
|
MODUK DEF STAN 80- 25 |
Paint, Ammunition Finishing, Stoving Spraying and Dipping Types: Semi- Gloss Matt-Issue 4; 05.97; Supersedes DSTAN 80-174/Issue 1 Dated 13 May 1993 |
|
MODUK DEF STAN 80- 27 |
Paint, Ammunition Finishing, Brushing, Spraying and Dipping Types: Semi-Gloss Matt-Issue 4; 12.98 |
|
MODUK DEF STAN 80- 34 |
Corrosion Preventive, Oil, Thin Film Joint Service Designation: PX-4- Issue 3: 06/1995; Incorporate Amendment 1 |
|
MODUK DEF STAN 80- 39 |
Varnish, Oil Bitumen, Anchoring, Type QX Types: Brushing Spraying- Issue 1; 11.82; Corrigendum |
|
MODUK DEF STAN 80- 41 |
Paint System, Finishing, Defence Equipment Matt - Type: Brushing Spraying-Issue 3; 03.00 |
|
MODUK DEF STAN 80- 44 |
Lacquer, Shellac, Type QX Grades: 40% 30% 20% 14.5% 11% 6%- Issue 2; 10.97 |
|
MODUK DEF STAN 80- 54 |
Paint, finishing, general service, fuel resistant, gloss-Issue 4: 12/2005; Supersedes DEF STAN 80-50 and DEF STAN 80-30 |
|
MODUK DEF STAN 80- 68 |
Paint, Marking Types: Brushing Brush Stencilling Silk Screen Stencilling Ink Jet Spraying-Issue 3; 12.98 |
|
MODUK DEF STAN 80- 73 |
Paint, Anti-Slip Type: Brushing-Issue 2; 02.94; Reprinted 6 August 1995 to Incorporate Amendment No 1 |
|
MODUK DEF STAN 81- 41: PART 1 |
Packaging of Defence Material Part 1: Introduction to Defence Packaging Requirements-Issue 5; 03.03 |
|
MODUK DEF STAN 81-41: PART 2 |
Packaging of Defence Materiel Part 2 Design-Issue 6 10/2005 |
|
MODUK DEF STAN 81- 41: PART 3 |
Packaging of Defence Materiel Part 3: Environmental Testing- Issue 4: 12 1998: Amendment 1: |
|
MODUK DEF STAN 81- 41: PART 4 |
Packaging of Defence Materiel Part 4: Documentation-Issue 5; 03 2003 |
|
MODUK DEF STAN 81-41: PART 5 |
Packaging of Defence Materiel Production Processes-Issue 5; 03.02 |
|
MODUK DEF STAN 81- 41: PART 6 |
Packaging of Defence Materiel Package Markings-Issue 6 6/2004 |
|
MODUK DEF STAN 81- 55 |
Packaging of Mechanical Components-Issue 4; 06.03 |
|
MODUK DEF STAN 83- 67 |
Tapes, Textile, Plain Weave, Polyester and Cotton, Tubular, Type QX- Issue 1 (03.80); Amendment 1 |
|
MODUK DEF STAN 91- 27 |
Grease, Automotive and Artillery NATO Code: G-403 Joint Service Designation: XG-279-Issue 3; 02.03; Reprinted to incorporate Amendment 1 |
|
MODUK DEF STAN 91- 44 |
Lubricating Oil, General Purpose: Petroleum, Light NATO Code No: O- 134 Joint Service Designation: OM-13-Issue 1 (12.78); Amendment 1 |
|
MODUK DEF STAN 91- 48 |
Hydraulic Fluid, Petroleum: Superclean NATO Code No: H-515 Joint Service Designation: OM-15 Hydraulic Fluid, Petroleum: Normal NATO Code No: H-520 Joint Service Designation: OM-18-Issue 2; 12.97 |
|
MODUK DEF STAN 91- 52 |
Grease, Aircraft: Multi-Purpose NATO Code No: G-395 Joint Service Designation: XG-293-Issue 1 (09.80); Amendment 1 |
|
MODUK DEF STAN 91- 53 |
Grease, Multi-Purpose: Low Temperature Range NATO Code: G-354 Joint Service Designation: XG-287-Issue 3; 02.03; Reprinted to incorporate Amendment 1 |
|
MODUK DEF STAN 91- 87 |
Turbine Fuel, Aviation Kerosine Type: Containing Fuel System Icing Inhibitor NATO Code: F-34 Joint Service Designation: AVTUR/FSII-Issue 5; 07/2005; Supersedes DERD 2453:06/1990 |
|
MODUK DEF STAN 91- 88 |
Turbine Fuel, Aviation: Wide Cut Type, Containing Fuel System Icing Inhibitor NATO Code: F-40 Joint Service Designation: AVTAG/FSII-Issue 3: 07/2005; Supersedes DERD 2454:02/1979 |
|
MODUK DEF STAN 91- 91 |
Turbine Fuel, Aviation Kerosine Type, Jet A-1 NATO Code: F-35 Joint Service Designation: AVTUR-Issue 5: 02.05: Supersedes DERD 2494:1988 |
|
MODUK DEF STAN 93- 101 |
Expanded Polyethylene Sheet High Density for General Purpose-Issue 2; 08.99 |
|
MODUK DEF STAN 93- 21 |
Chloroprene Rubber, Cellular, Closed Cell, Minimum Tarnishing-Issue 4: February 2004 |
|
MODUK DEF STAN 93- 23 |
Celluloid Sheet, Transparent, Type QX-Issue 1 (01.81); Amendment 1 |
|
MODUK DEF STAN 93- 36 |
Polyethylene Materials for Moulding and Extrusion, Type QX-Issue 2 10/2004 |
|
MODUK DEF STAN 93- 50 |
General Requirements for the Quality Assurance of Fully compounded Unvulcanized Rubber and Vulcanized Rubber Products-Issue 2: 03/2001 |
|
MODUK DEF STAN 93- 63 |
Method for Specifying Polyamide (PA) Homopolymers for Moulding and Extrusion-Issue 1; 09.92; Supersedes DEF STAN 93-8 |
|
MODUK DEF STAN 95- 07 |
Wire for Locking Purposes and Wire Locking Practice for Aerospace Use-Issue 2 08/2004 |
|
MODUK DEF STAN 95- 14 |
Bars, Billets, Plates and Forgings, Weldable Chromium-Nickel-Copper- Molybdenum Precipitation Hardening Corrosion Resisting Steel-Issue 2; 05.97; Corrigendum |
|
MODUK DEF STAN 95- 16 |
Manufacture of Armament Components in Weldable Chromium-Nickel- Copper-Molybdenum Precipitation Hardening Corrosion Resisting Steel-Issue 2; 05.97 |
|
MODUK DEF STAN 95- 23 |
Ferrous Armour Quality Extrusions and Forgings-Issue 2 09/2004 |
|
MODUK DEF STAN 95- 24 |
Armour Plate, Steel (3-160 mm)-Issue 3; 01.04 |
|
MODUK DEF STAN 95- 25 |
Armour Quality Steel Castings-Issue 2 09/2004 |
|
MODUK DEF STAN 95- 30 |
FV Construction: Auto Stud Welding (Steel)-Issue 2 |
|
MODUK DEF STAN 95- 9 |
Cartridge Brass for Ammunition Components-Issue 3; 11.98 |