DOD ADOPTED - SAE Collection

Description:
DOD ADOPTED - SAE Collection contains more than 3200 documents.

The DoD Adopted Industry Standards service enables you to quickly identify, view, and print over 9,500 Active Non-Government Standards that have been adopted for use by the U.S. Department of Defense.

Various reports are provided to give the user information prior to actually viewing the document, which can translate into tremendous time and dollar savings.

Online Access - Subscribers get secure online access to search, view, bookmark, track, and print documents according to the license agreement. Online documents are updated daily. Multiple users can share a single license. You also get access to IHS Standards bibliographic data – more than 1 Million documents.

Individual Documents - IHS sell individual documents through the IHS Store in electronic or hard copy formats. Statistics show that 1 out of every 5 people who purchase individual documents would benefit from an online subscription. You should consider a collection over individual document purchases if your company buys more than $3,000 in standards per year.

SAE AMS 10133A

Angle - Equal Leg Extruded-FSC 9540

SAE AMS 10134A

Angle - Unequal Leg Extruded-FSC 9540

SAE AMS 1424G

(R) Deicing/Anti-Icing Fluid, Aircraft SAE Type I

SAE AMS 2175

Castings, Classification and Inspection of-Superseding AMS-STD- 2175

SAE AMS 2241P

Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

SAE AMS 2242F

Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate

SAE AMS 2248E

Chemical Check Analysis Limits Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys

SAE AMS 2301J

Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure

SAE AMS 2400V

Plating, Cadmium

SAE AMS 2404E

Plating, Electroless Nickel

SAE AMS 2406K

Plating, Chromium Hard Deposit

SAE AMS 2410J

Plating, Silver Nickel Strike, High Bake

SAE AMS 2417G

Plating, Zinc-Nickel Alloy

SAE AMS 2418G

Plating, Copper

SAE AMS 2424E

Plating, Nickel Low-Stressed Deposit

SAE AMS 2430M

(R) Shot Peening, Automatic

SAE AMS 2469G

Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance Requirements

SAE AMS 2470L

Anodic Treatment of Aluminum Alloys Chrome Acid Process

SAE AMS 2471F

Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating

SAE AMS 2644D

Inspection Material, Penetrant

SAE AMS 2658B

Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts

SAE AMS 2681B

Welding, Electron-Beam

SAE AMS 2700B

Passivation of Corrosion Resistant Steels

SAE AMS 2750D

(R) Pyrometry

SAE AMS 2759/3D

Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts

SAE AMS 2759/6B

Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts

SAE AMS 2770G

Heat Treatment of Wrought Aluminum Alloy Parts

SAE AMS 2801B

Heat Treatment of Titanium Alloy Parts

SAE AMS 3195E

Silicone Rubber Sponge Closed Cell, Medium

SAE AMS 3216G

Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80

SAE AMS 3218C

Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95

SAE AMS 3276D

(R) Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 Degrees F (182 Degrees C)

SAE AMS 3277C

(R) Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 400 Degrees F (204 Degrees C)-FSC 8030

SAE AMS 3281C

(R) Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 Degrees F (182 Degrees C)

SAE AMS 3374C

(R) Sealing Compound Aircraft Firewall-FSC 8030

SAE AMS 3652C

Polytetrafluoroethylene (PTFE) Film Non-Critical Grade

SAE AMS 4027M

(R) Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated-UNS A96061

SAE AMS 4050H

Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged-UNS A97050

SAE AMS 4108F

Aluminum Alloy, Hand Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050- T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged-UNS A97050

SAE AMS 4340D

Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050- T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged-UNS A97050

SAE AMS 4640G

Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)-Composition similar to UNS C63000

SAE AMS 4911J

Titanium Alloy, Sheet, Strip, and Plate 6AI - 4V Annealed-UNS R56400

SAE AMS 4928Q

Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed-UNS R56400

SAE AMS 4967H

Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable-UNS R56400

SAE AMS 5343D

(R) Steel, Corrosion Resistant, Investmment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (UNS J92200)

SAE AMS 5355H

Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated-UNS J92200

SAE AMS 5510R

Steel, Corrosion and Heat Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100

SAE AMS 5512K

Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated-UNS S34700

SAE AMS 5513H

Steel, Corrosion Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated-UNS S30400

SAE AMS 5516N

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated-UNS S30200

SAE AMS 5517L

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength-UNS S30100

SAE AMS 5518K

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 150 ksi (1034 MPa) Tensile Strength-UNS S30100

SAE AMS 5519M

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength-UNS S30100

SAE AMS 5520F

Steel, Corrosion and Heat Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1Al Solution Heat Treated, Precipitation Hardenable-UNS S15700

SAE AMS 5525H

Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 Degrees F (982 Degrees C) Solution Heat Treated-UNS S66286

SAE AMS 5528F

Steel, Corrosion Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1A1 Solution Heat Treated, Precipitation Hardenable-UNS S17700

SAE AMS 5529G

Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness-UNS S17700

SAE AMS 5536L

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated-UNS N06002

SAE AMS 5557J

Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100

SAE AMS 5561F

Steel, Corrosion and Heat Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic-UNS S21900

SAE AMS 5596J

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Heat Treated-UNS NO7718

SAE AMS 5599F

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7(Cb+Ta) Annealed-UNS N06625

SAE AMS 5604E

Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable-UNS S17400

SAE AMS 5613R

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed-UNS S41000

SAE AMS 5629E

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable-UNS S13800

SAE AMS 5630G

Steel, Corrosion Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) (UNS S44004)

SAE AMS 5639H

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 19Cr - 10Ni Solution Heat Treated-UNS S30400

SAE AMS 5640T

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining-UNS S30300 (Type 1); UNS S30323 (Type 2); UNS S30310 (Type 3)

SAE AMS 5643Q

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable-UNS S17400

SAE AMS 5645P

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100

SAE AMS 5646M

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11 Ni - 0.60Cb (SAE 30347) Solution Heat Treated-UNS S34700

SAE AMS 5647H

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, And Rings 19Cr - 9.5Ni Solution Heat Treated-UNS S30403

SAE AMS 5659L

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable (Composition similar to UNS S15500)

SAE AMS 5662M

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Heat Treated, Precipitation Hardenable-UNS

SAE AMS 5663M

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution and Precipitation Heat Treated-UNS N07718

SAE AMS 5666E

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65 (Cb+Ta) Annealed-UNS N06625

SAE AMS 5678F

Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable-UNS S17700; Superseding AMS 5673

SAE AMS 5688K

Steel, Corrosion Resistant, Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper-UNS S30200

SAE AMS 5731K

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1800 Degrees F (982 Degrees C) Solution Heat Treated-UNS S66286

SAE AMS 5732H

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 Degrees F (982 Degrees C) Solution and Precipitation Heat Treated-UNS S66286

SAE AMS 5737N

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1650 Degrees F (899 Degrees C) Solution and Precipitation Heat Treated-UNS S66286

SAE AMS 5844F

Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated and Work Strengthened-UNS R30035

SAE AMS 5862G

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation- Hardenable-Composition similar to UNS S15500

SAE AMS 6257C

Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered

SAE AMS 6265K

Steel, Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Vacuum Consumable Electrode Remelted-UNS G93106

SAE AMS 6322N

Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)-UNS G87400

SAE AMS 6345A

Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated-UNS G41300

SAE AMS 6348C

Steel, Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Normalized- UNS G41300

SAE AMS 6350J

Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)-UNS G41300

SAE AMS 6359G

Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)-UNS G43400

SAE AMS 6370L

Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)-UNS G41300

SAE AMS 6414J

Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted-UNS G43400

SAE AMS 6415R

Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)-UNS G43406

SAE AMS 6440M

Steel, Bars, Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) For Bearing Applications-Composition similar to UNS G52986

SAE AMS 6470L

Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C)-UNS K24065

SAE AMS 6487J

Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted-UNS T20811

SAE AMS 7259D

Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95

SAE AMS 7276G

Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80

SAE AMS-A- 21180A

Aluminum-Alloy Castings, High Strength AREA MECA-Superseding AMS 3894/2A

SAE AMS-A- 22771

Aluminum Alloy Forgings, Heat Treated-AREA FORG; Should Be Used Instead of MIL-A-22771D, Which Was Cancelled on 10 September 1999

SAE AMS-C- 26074B

Electroless Nickel Coatings

SAE AMS-C- 27725A

Coating, Corrosion Preventative, Polyurethane for Aircraft Integral Fuel Tanks for Use to 250 Degrees F (121 Degrees C)-FSC 8030

SAE AMS-C- 9084

Cloth, Glass, Finished, for Resin Laminates-FSC 8305; Should Be Used Instead of MIL-C-9084C, Which Was Cancelled on 10 September 1999

SAE AMS-DTL- 22499

Shim Stock, Laminated

SAE AMS-DTL- 22499/1A

Shim Stock, Laminated, Aluminum Alloy-FSC 9535

SAE AMS-DTL- 23053

Insulation Sleeving, Electrical, Heat Shrinkable, General Specification for-FSC 5970; Should Be Used Instead of MIL-DTL-23053E, Which Was Cancelled on 16 September 1999

SAE AMS-DTL- 23053/1

Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible-FSC 5970; Should Be Used Instead of MIL-DTL-23053/1C, Which Was Cancelled on 16 September 1999

SAE AMS-DTL- 23053/12

Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene-FSC 5970; Should Be Used Instead of MIL-DTL-23053/12C, Which Was Cancelled on 16 September 1999

SAE AMS-DTL- 23053/4

Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Dual- Wall, Outer Wall Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/4D, Which Was Cancelled on 16 September 1999

SAE AMS-DTL- 23053/5

Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/5C, Which Was Cancelled on 16 September 1999

SAE AMS-DTL- 23053/8

Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/8C, Which Was Cancelled on 16 September 1999

SAE AMS-H- 6875A

Heat Treatment of Steel Raw Materials-Should Be Used Instead of MIL-H-6875, Which Was Cancelled on 2 February 1999

SAE AMS-H- 81200A

Heat Treatment of Titanium and Titanium Alloys-Replaces MIL-H- 81200

SAE AMS-M- 3171

Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on

SAE AMS-P- 5315A

(R) Butadiene - Acrylonitrile (NBR) Rubber for Fuel-Resistant Seals 60 to 70

SAE AMS-P- 5510

Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Degrees to 160 Degrees F)

SAE AMS-P- 81728

Plating, Tin-Lead (Electrodeposited)

SAE AMS-P- 83461

Packing, Preformed, Petroleum Hydralic Fluid Resistant, Improved Performance at 275 Degrees F (135 Degrees C)

SAE AMS-P- 83461/1A

Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275°F (135°C) Sizes and Tolerances

SAE AMS-QQ-A- 200/11

Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded- UNS A97075

SAE AMS-QQ-A- 200/3

Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded- UNS A92024

SAE AMS-QQ-A- 200/8

Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded- UNS A96061

SAE AMS-QQ-A- 200B

Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for

SAE AMS-QQ-A- 225/6A

Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished-UNS A92024

SAE AMS-QQ-A- 225/8A

Aluminum Alloy 6061, Bar, Rod, and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished-UNS A96061

SAE AMS-QQ-A- 225/9

Aluminum Alloy 7075, Bar, Rod, and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished-UNS A97075

SAE AMS-QQ-A- 225B

Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For

SAE AMS-QQ-A- 250/1

Aluminum 1100, Plate and Sheet-UNS A91100

SAE AMS-QQ-A- 250/11

Aluminum Alloy 6061, Plate and Sheet-UNS A96061

SAE AMS-QQ-A- 250/12

Aluminum Alloy 7075, Plate and Sheet-UNS A97075

SAE AMS-QQ-A- 250/13

Aluminum Alloy Alclad 7075, Plate and Sheet-UNS A87075

SAE AMS-QQ-A- 250/4A

Aluminum Alloy 2024, Plate and Sheet-UNS A92024

SAE AMS-QQ-A- 250/5A

Aluminum Alloy Alclad 2024, Plate and Sheet-UNS A82024

SAE AMS-QQ-A- 250/8A

Aluminum Alloy 5052, Plate and Sheet-UNS A95052

SAE AMS-QQ-A- 250A

Aluminum and Aluminum Alloy, Plate and Sheet General Specification for

SAE AMS-QQ-A- 367

Aluminum Alloy Forgings

SAE AMS-QQ-C- 320

Chromium Plating (Electrodeposited)-FSC MFFP; Should be used instead of QQ-C-320, which was cancelled on 3 May 2001

SAE AMS-QQ-N- 290

Nickel Plating (Electrodeposited)-FSC MFFP; Should be used instead of QQ-N-290, which was cancelled 3 May 2001

SAE AMS-QQ-P- 416B

Plating, Cadmium (Electrodeposited)

SAE AMS-QQ-S- 763A

Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings-Should Be Used Instead of QQ-S-763F, Which Was Cancelled on October 5, 1998

SAE AMS-R- 25988

Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes

SAE AMS-R- 6855A

Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification for-Should Be Used Instead of MIL-R-6855, Which Was Cancelled on December 18, 1998

SAE AMS-R- 83485

Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures

SAE AMS-R- 83485/1

Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures, O-Rings, Sizes and Tolerances-FSC 5330

SAE AMS-S- 13165

Shot Peening of Metal Parts

SAE AMS-S- 5000

Steel, Chrome-Nickel-Molybdenum (E4340) Bars and Reforging Stock

SAE AMS-S- 6758A

Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality)

SAE AMS-S- 7720

Steel, Corrosion-Resistant (18-8) Bars, Wire and Forging Stock (Aircraft Quality)-FSC 9510

SAE AMS-S- 8802B

Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion

SAE AMS-STD- 2154

Inspection, Ultrasonic, Wrought Metals, Process for

SAE AMS-STD- 66

Steel: Chemical Composition and Hardenability

SAE AMS-T- 21014

Tungsten Base Metal, High Density-Should Be Used Instead of MIL- T-21014D, Which Was Cancelled on October 5, 1998

SAE AMS-T- 6736A

Tubing, Chrome-Molybdenum (4130 or 8630) Steel, Seamless and Welded

SAE AMS-T- 6845

Tubing, Steel, Corrosion-Resistant (S30400), Aeropsace Vehicle Hydraulic System 1/8 Hard Condition

SAE AMS-T- 7081

Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality

SAE AMS-T- 9046A

Titanium and Titanium Alloy, Sheet, Strip, and Plate-FSC 9535

SAE AMS-T- 9047

Titanium and Titanium Alloy, Bars (Rolled or Forged) and Reforging Stock, Aircraft Quality

SAE AMS-W- 6858A

Welding, Resistance: Spot and Seam

SAE AMS-WW-T- 700

Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for

SAE AMS-WW-T- 700/3

Tube, Aluminum Alloy, Drawn, Seamless, 2024

SAE AMS-WW-T- 700/4

Tube, Aluminum Alloy, Drawn, Seamless, 5052

SAE AMS-WW-T- 700/6

Tube, Aluminum Alloy, Drawn, Seamless, 6061

SAE ARP 1383B

(R) Impulse Testing of Aerospace Hydraulic Actuators, Valves, Pressure Containers, and Similar Fluid System Components

SAE ARP 5316B

Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly

SAE ARP 994

Recommended Practice for the Design of Tubing Installations for Aerospace Fluid Power Systems

SAE AS 1033E

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED-FSC 4730

SAE AS 1034E

FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED- FSC 4730

SAE AS 1035E

FITTING, TEE, STANDARD AND REDUCER, FLARED

SAE AS 1038E

FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED-FSC 4730

SAE AS 1040E

FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED-FSC 4730

SAE AS 123301 THRU AS 123450

Rivet, Solid, Universal Head, AMS 7232-FSC 5320

SAE AS 1300B

(R) PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR-FSC 4730

SAE AS 1301D

Adapters - Port Connection, Ring Locked Design, Installation and Removal of

SAE AS 1339F

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees Lightweight, Hydraulic and Pneumatic

SAE AS 13572

Springs, Helical, Compression and Extension

SAE AS 14101B

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED RACE, -65 TO 325 °F-FSC 3120

SAE AS 14103C

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED RACE, -65 TO 325 °F-FSC 3120

SAE AS 14104B

BEARING, PLAIN, SELF-LUBRICATING,SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO 325 °F-FSC 3120

SAE AS 14237A

Bushing, Sleeve Plain, Press Fit, Ream Type

SAE AS 14238B

Bushing, Sleeve Flanged, Press Fit, Ream Type-FSC 3120

SAE AS 15001A

FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250- 28 TAPER THREADS, STEEL, TYPE I-FSC 4730

SAE AS 17143

Terminal, Lug, Crimp Style, Copper, Insulated, Rectangular Tongue, Type II, Class 1 for 105 Degrees C Total Conductor Temperature-FSC 5940

SAE AS 18280B

(R) Fittings, 24 degrees Cone Flareless, Fluid Connection, 3000 psi

SAE AS 1895/1D

Coupling, V-Retainer, Single Latch, Type I Standard Profile-FSC 5340

SAE AS 1933A

(R) Age Controls for Hose Containing Age-Sensitive Elastomeric Material

SAE AS 1986C

(R) FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/-FSC 4730

SAE AS 20253

Pin, Hinge-FSC 5315

SAE AS 20659A

Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Type I, Class I, for 175 Degrees C Total Conductor Temperature-FSC 5940; Amendment 1 - September 2004

SAE AS 21902B

(R) UNION, FLARELESS TUBE-FSC 4730

SAE AS 21908C

ELBOW, BULKHEAD UNIVERSAL 90 DEGREE, FLARELESS TUBE-FSC 4730

SAE AS 21913B

(R) PLUG, FLARELESS TUBE-FSC 4730

SAE AS 21914B

(R) CAP, PRESSURE SEAL, FLARELESS TUBE FITTING-FSC 4730

SAE AS 21916C

REDUCER, EXTERNAL THREAD, FLARELESS TUBE-FSC 4730

SAE AS 21919

CLAMP, LOOP TYPE, CUSHIONED SUPPORT-FSC 5340

SAE AS 21921A

(R) NUT, SLEEVE COUPLING, FLARELESS-FSC 4730; Should Be Used Instead of MS21921, Which Was Cancelled on 13 January 2000

SAE AS 21922A

(R) SLEEVE, COUPLING, FLARELESS-FSC 4730

SAE AS 21924B

(R) UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL- FSC 4730

SAE AS 22759

Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy- Amendment 1 - March 2005

SAE AS 22759/11

Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Silver- Coated Copper Conductor, 600 Volt-FSC 6145

SAE AS 22759/16

Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Tin-Coated Copper Conductor, 600-Volt, 150 Degrees C-FSC 6145

SAE AS 22759/32

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Tin-Coated Copper, 150 Degrees Celsius, 600 Volt-FSC 6145

SAE AS 22759/33

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Silver-Coated, High-Strength Copper Alloy, 200 Degrees Celsius, 600 Volt-FSC 6145

SAE AS 22759/34

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Tin-Coated Copper, 150 Degrees Celsius, 600 Volt-FSC 6145

SAE AS 22759/43

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated Copper, 200 Degrees Celsius, 600 Volt-FSC 6145

SAE AS 22759/44

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Silver-Coated Copper, 200 Degrees Celsius, 600 Volt-FSC 6145

SAE AS 23190

Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support-FSC 5975; Amendment 2 - January 2006

SAE AS 24585B

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS-FSC 5360

SAE AS 25036

TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1, (FOR 105°C TOTAL CONDUCTOR TEMPERATURE)-FSC 5940

SAE AS 25281A

Clamp, Loop, Plastic, Wire Support-FSC 5340; Should Be Used Instead of MS25281, Which Was Cancelled on 29 October 1999

SAE AS 27212

Terminal Board Assembly, Molded-In-Stud, Electric-FSC 5940; Should Be Used Instead of MS27212, which Was Cancelled on 31 August, 1998

SAE AS 27641B

(R) Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty

SAE AS 28775

Packing, Preformed, Hydraulic, +275 Degrees F ("O"Ring)-FSC 5331

SAE AS 28778

Packing, Preformed, Straight Thread Tube Fitting Boss-FSC 5331

SAE AS 29513

Packing, Preformed, Hydocarbon Fuel Resistant, "O" Ring-FSC 5331

SAE AS 3208

Packing, Preformed - AMS 7276 - Seal-"BEST COPY AVAILABLE"

SAE AS 3209

Packing, Preformed - AMS 7276, ´O´ Ring-"BEST COPY AVAILABLE"

SAE AS 3217A

Ring, Retaining-Spiral, Internal, Light Duty, CRES-FSC 5365

SAE AS 33201

Circuit Breaker-Aircraft, Trip-Free, Push Pull, 1/2 Thru 20 Amps, Type I -55 Thru +121 Degrees C-FSC 5925; Should Be Used Instead of MS3320N, Which Was Cancelled on 31 August 1999; Amendment 1 - November 2004

SAE AS 33514

Fitting End, Standard Dimensions for Flareless Tube Connection and Gasket Seal-FSC 4730

SAE AS 33515

Fitting End, Standard Dimensions for Bulkhead Flareless Tube Connections-FSC 4730; Should Be Used Instead of MS33515, Which Was Cancelled on 13 January 2000

SAE AS 33611

Tube Bend Radii-FSC 4710

SAE AS 33671C

(R) STRAP, TIEDOWN, ELECTRICAL COMPONENTS, ADJUSTABLE, SELFCLINCHING, PLASTIC, TYPE I, CLASS 1-FSC 5975

SAE AS 33681A

Strap, Tiedown, Electrical Components, Identification, Adjustable, Self-Clinching, Plastic, Type II, Class 1

SAE AS 3510A

Cable, Safety, Kit - Corrosion and Heat Resistant Steel, UNS S32100-UNS S32100; FSC 5340

SAE AS 3578

Packing, Preformed - O-Ring Seal AMS 7271-FSC 5330

SAE AS 3580

Bolt, Machine - Double Hex Head, PD Shank, UNS N07718 - 185 ksi- FSC 5306

SAE AS 3581

Packing, Preformed - O-Ring Seal AMS 7259-FSC 5330

SAE AS 3582

Packing, Preformed - O-Ring Seal AMS 3304-FSC 5330

SAE AS 39029

Contacts, Electrical Connector, General Specification for- Amendment 1 - February 2005

SAE AS 39029/56

Contacts, Electrical Connector, Socket, Crimp Removable, (for MIL-C-38999 Series I, III, and IV Connectors)-FSC 5935

SAE AS 39029/58

Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C- 24308, MIL-C-38999 Series I, II, III, and IV, and MIL-C-55302/69 and MIL-C-83733 Connectors)- FSC 5935

SAE AS 4059E

(R) Aerospace Fluid Power - Cleanliness Classification for Hydraulic Fluids

SAE AS 4330

TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD-FSC 4730

SAE AS 4395B

(R) FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD

SAE AS 4396B

(R) FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD

SAE AS 4716A

(R) Gland Design, O-ring and Other Elastomeric Seals

SAE AS 478L

Identification Marking Methods

SAE AS 4841

Fittings, 37 Degree Flared, Fluid Connection

SAE AS 4875

Fittings, Straight Threaded Boss or Flanged, Fluid Connection

SAE AS 50881B

(R) Wiring Aerospace Vehicle-Amendment 1 - November 2003

SAE AS 5131

Tube End - Beaded, Design Standard

SAE AS 5168A

FITTING, PLUG, TUBE END, FLARED-FSC 4730; Should Be Used Instead of the Following Two Flared Fitting Standards, Which Were Cancelled on 28 September 1999: AN806 REV 7 and MS24404E

SAE AS 5169

Fitting, Port Plug and Bleeder-FSC 4730

SAE AS 5172A

FITTING, ADAPTER, PORT, REDUCER-FSC 4730; Should Be Used Instead of AN893 and MS24397, Which Was Cancelled on 26 May 2000; SAE 5202, Reference within SAE AS 5172, Has Not Been Issued; Use MS33649 in Place of SAE AS 5202 Until SAE AS 5202 is Published

SAE AS 5173B

FITTING, BUSHING, PORT, REDUCER-FSC 4730

SAE AS 5174C

FITTING, UNION AND REDUCER, FLARED-FSC 4730

SAE AS 5176B

FITTING, SLEEVE, FLARED-FSC 4730; Should Be Used Instead of MS20819G, Which Was Cancelled on 28 September 1999

SAE AS 5178A

NUT, FITTING, BULKHEAD-FSC 4730; Should Be Used Instead of AN924 REV 11, Which Was Cancelled on 16 March 2000

SAE AS 5179A

NUT, FITTING, PORT-FSC 4730; Should Be Used Instead of AN6289 REV 7, Which Was Cancelled on 28 September 1999

SAE AS 5194B

FITTING, ADAPTER, STRAIGHT PIPE TO FLARED-FSC 4730; Should Be Used Instead of AN816 REV 13, Which Was Cancelled on 19 May 2000

SAE AS 5195C

FITTING, ELBOW, 90 DEGREES, FLARED TO PIPE-FSC 4730

SAE AS 5202A

PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD-FSC 4730; Supersedes SAE AS 33649A

SAE AS 5406C

FITTING, UNION, TUBE, .375 BULKHEAD-FSC 4730; Should Be Used Instead of AN832 and MS24393 That Were Cancelled on 11 February 2000

SAE AS 5440

Hydraulic Systems, Aircraft, Design and Installation Requirements for- FSC 1650; Should Be Used Instead of MIL-H-5440H, Which Was Cancelled on 13 September 1999

SAE AS 568B

Aerospace Size Standard for O-Rings

SAE AS 7245

Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification For-FSC 5340; UNS N30400; Supersedes AMS 7245D

SAE AS 7351

Clamp, Loop Type Bonding-FSC 5340

SAE AS 7788

Panels, Information, Integrally Illuminated-FSC 6220; Should Be Used Instead of MIL-P-7788F(1), Which Was Cancelled on 13 September 1999

SAE AS 7928

Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for-FSC 5940; Should Be Used Instead of MIL-T-7928G, Which Was Cancelled on 31 August 1999; Amendment 1 - September 2004

SAE AS 7928/1A

Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 105 Degrees C Total Conductor Temperature-FSC 5940; Amendment 1 - September 2004

SAE AS 7928/4

Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1 (for 150 Degrees C Total Conductor Temperature)-FSC 5940; Should Be Used Instead of MIL-T-7928/4A, Which Was Cancelled on 31 A

SAE AS 81820B

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation

SAE AS 81824/1

SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1-FSC 5940; Should Be Used Instead of MIL-T-81824/1, Which Was Cancelled on September 30, 1998

SAE AS 81934/1A

(R) BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, -65 °F TO 325 °F-FSC 3120

SAE AS 81934/2A

(R) BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, -65 °F TO 325 °F-FSC 3120

SAE AS 81934A

(R) Bearings, Sleeve, Plain and Flanged, Self-Lubricating

SAE AS 81935/1

Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, -65 Degrees F to +325 Degrees F-FSC 3120

SAE AS 81935B

(R) Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For

SAE AS 83519/1

SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT- SHRINKABLE, ENVIRONMENT RESISTANT FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)-FSC 5940; Should Be Used for New Design Instead of MIL-S- 83519/1, which Was Inactivated for New Design on August 3

SAE AS 83519/2

SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT- SHRINKABLE, ENVIRONMENT RESISTANT WITH PRE INSTALLED LEADS FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)-FSC 5940; Should Be Used Instead of MIL-S-83519/2 Which Was Inactivated for New Design on

SAE AS 83519A

Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For-FSC 5940; Amendment 1 - September 2004

SAE AS 85049/18

Connector Accessories, Electrical, Backshell, Environmental, Straight, RFI/EMI, Category 2B (for MIL-C-38999 Series III and IV Connectors)-FSC 5935

SAE AS 85049/1A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, GROUNDING (WITHOUT STRAIN RELIEF), CATEGORY 1C (FOR MIL-DTL-5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS)-FSC 5935

SAE AS 85049/38A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AS 85049/48A

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 7 (FOR MIL-DTL-24308 CONNECTORS)-FSC 5935

SAE AS 85049/49A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4B (MIL- DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85049/52A

Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Straight, Self-Locking and Non Self-Locking Category 4B (for MIL-DTL- 5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series III Connectors)-FSC 5935; Amendment 1 - May 2005

SAE AS 85049/95A

Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, 3/4 Perimeter-FSC 5935; Amendment 1 - March 2005

SAE AS 85049A

Connector Accessories, Electrical General Specification For- Amendment 2 - August 2004

SAE AS 8660

Silicone Compound NATO Code Number S-736-FSC 6850; Should Be Used Instead of MIL-S-8660C, Which Was Cancelled on 30 September 1999

SAE AS 8791/1A

Reretainer, Packing, Hydraulic and Pneumatic, Polytetrafluoroethylene, Single Turn

SAE AS 8791A

(R) Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin

SAE AS 8879D

Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter

SAE AS 90376

Cap, Dust, Plastic, Electric Connector-FSC 5340; To be Used Instead of MS 90376E; Amendment 1 - December 2004

SAE AS 9100B

Quality Management Systems - Aerospace - Requirements- Technically Equivalent to AECMA prEN 9100

SAE AS 9320

Washer, Flat - AMS 6350-FSC 5310

SAE AS 9390B

(R) Pin, Straight, Headless, Dowel - CRES, UNS S66286, Standard and Oversize-FSC 5315

SAE AS 9556B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A-FSC 5306

SAE AS 9557A

(R) Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 KSI Min,.2500-28 UNJF-3A-FSC 5306

SAE AS 9592A

(R) BRACKET, ANGLE, 90°, CRES UNS S32100, .190 BOLT-FSC 5340

SAE B92.1

Involute Splines and Inspection

SAE J1453

Fitting - O-Ring Face Seal

SAE J1508

Hose Clamp Specifications

SAE J20

Coolant System Hoses

SAE J2295

Fastener Part StandardCaps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)

SAE J30

Fuel and Oil Hoses-FSC 4720

SAE J403

Chemical Compositions of SAE Carbon Steels-Supersedes Ford ESN-M1A46-A

SAE J429

Mechanical and Material Requirements for Externally Threaded Fasteners

SAE J512

Automotive Tube Fittings

SAE J514

Hydraulic Tube Fittings

SAE J516

(R) Hydraulic Hose Fittings

SAE J517

Hydraulic Hose

SAE MA 1567B

Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions for