DOD ADOPTED - IEEE Collection

Description:
DOD ADOPTED - IEEE Collection contains more than 65 documents.

The DoD Adopted Industry Standards service enables you to quickly identify, view, and print over 9,500 Active Non-Government Standards that have been adopted for use by the U.S. Department of Defense.

Various reports are provided to give the user information prior to actually viewing the document, which can translate into tremendous time and dollar savings.

Online Access - Subscribers get secure online access to search, view, bookmark, track, and print documents according to the license agreement. Online documents are updated daily. Multiple users can share a single license. You also get access to IHS Standards bibliographic data – more than 1 Million documents.

Individual Documents - IHS sell individual documents through the IHS Store in electronic or hard copy formats. Statistics show that 1 out of every 5 people who purchase individual documents would benefit from an online subscription. You should consider a collection over individual document purchases if your company buys more than $3,000 in standards per year.

IEEE 1

Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation

IEEE 1003.1

Standard for Information Technology - Portable Operating System Interface (POSIX)-IEEE Computer Society Document; Includes Vol 1-Base Definitions, Vol 2- System Interfaces, Vol 3-Shell and Utilities, Vol 4-Rationale (Informative)

IEEE 112

Standard Test Procedure for Polyphase Induction Motors and Generators

IEEE 114

Test Procedure for Single-Phase Induction Motors

IEEE 115

Guide: Test Procedures for Synchronous Machines Part I Acceptance and Performance Testing Part II Test Procedures and Parameter Determination for Dynamic Analysis

IEEE 1220

Standard for Application and Management of the Systems Engineering Process-IEEE Computer Society Document

IEEE 12207.0

Industry Implementation of International Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes

IEEE 12207.1

Industry Implementation of International Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes - Life Cycle Data

IEEE 12207.2

Industry Implementation of International Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes - Implementation Considerations

IEEE 1278.1

Distributed Interactive Simulation - Application Protocols-IEEE Computer Society Document

IEEE 1278.1A

Standard for Distributed Interactive Simulation - Application Protocols-IEEE Computer Society Document; Supplement to IEEE 1278.1:1995

IEEE 1278.2

Standard for Distributed Interactive Simulation - Communication Services and Profiles-IEEE Computer Society Document

IEEE 1278.3

Recommended Practice for Distributed Interactive Simulation - Exercise Management and Feedback-IEEE Computer Society Document

IEEE 1278.4

Recommended Practice for Distributed Interactive Simulation - Verification, Validation, and Accreditation-IEEE Computer Society Document

IEEE 145

Standard Definitions of Terms for Antennas

IEEE 1516

Standard for Modeling and Simulation(M&S) High Level Architecture (HLA)-Framework and Rules-IEEE Computer Society Document

IEEE 1516.1

Standard for Modeling and Simulation(M&S) High Level Architecture (HLA)oFederate Interface Specification-IEEE Computer Society Document

IEEE 1516.2

Standard for Modeling and Simulation(M&S) High Level Architecture (HLA) - Object Model Template (OMT) Specification-IEEE Computer Society

IEEE 1516.3

Recommended Practice for High Level Architecture (HLA) Federation Development and Execution Process (FEDEP)-IEEE Computer Society Document

IEEE 260.1

Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)

IEEE 280

Standard Letter Symbols for Quantities Used in Electrical Science and Electrical Engineering-Revision of ANSI Y10.5-1968

IEEE 299

Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures

IEEE 315

Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Class Designation Letters)-CSA Z99-75; Includes supplement to ANSI 732.2-75 and IEEE 315-75

IEEE 32

Standard Requirements, Terminology, and Test Procedure for Neutral Grounding Devices

IEEE 383

Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations

IEEE 386

Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V

IEEE 400

Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems

IEEE 421.1

Standard Definitions for Excitation Systems for Synchronous Machines-Revision of IEEE Std 421-1972

IEEE 43

Recommended Practice for Testing Insulation Resistance of Rotating Machinery

IEEE 45

Recommended Practice for Electrical Installations on Shipboard

IEEE 48

Standard Test Procedures and Requirements for Alternating-Current Cable Terminations 2.5 kV Through 765 kV

IEEE 521

Standard Letter Designations for Radar-Frequency Bands

IEEE 602

Recommended Practice for Electric Systems in Health Care Facilities- IEEE White Book (Color Book Series)

IEEE 686

Standard Radar Definitions

IEEE 81

Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System

IEEE 91A/91

IEEE Standard for Graphic Symbols for Logic Functions

IEEE 945

Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and Technology

IEEE 991

Standard for Logic Circuit Diagrams

IEEE C135.30

Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction

IEEE C136.10

Roadway Lighting Equipment - Locking-Type Photocontrol Devices and Mating Receptacle Physical and Electrical Interchangeability and Testing

IEEE C2

National Electrical Safety Code

IEEE C37.09

Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Amendment 1: 03/20/2005

IEEE C37.11

Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Revision of ANSI C37.11- 1979

IEEE C37.16

Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors Preferred Ratings, Related Requirements, and Application Recommendations- Replaces NEMA C37.16-2000

IEEE C37.17

American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers-Replaces NEMA C37.17-1997

IEEE C37.20.1

Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear-Amendment 1A:09/22/2005

IEEE C37.20.2

Standard for Metal-Clad Switchgear

IEEE C37.20.3

Metal-Enclosed Interrupter Switchgear

IEEE C37.32

High-Voltage Switches, Bus Supports and Accessories Schedule of Preferred Ratings, Construction Guidelines and Specifications

IEEE C37.42

Specification for High-Voltage Expulsion Type Distribution Class Fuses, Cutouts, Fuse Disconnecting Switches and Fuse Links-Replaces NEMA C37.42- 1996

IEEE C37.46

High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches

IEEE C37.90

Standard for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE C37.90.1

Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE C57.12.00

Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers

IEEE C57.12.01

Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin-Encapsulated Windings

IEEE C57.12.10

230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single- Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing Safety Requiremen

IEEE C57.12.20

Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and Below; Low Voltage, 7970/13800Y Volts and Below

IEEE C57.12.22

Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller: High Voltage, 34 500 Grd Y/19 920 Volts and Below; Low Voltage, 480 Volts and Below- Replaces NEMA C57.12.22

IEEE C57.12.25

Transformers Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 kVA and Smaller Require

IEEE C57.12.80

Standard Terminology for Power and Distribution Transformers

IEEE C57.12.90

Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers

IEEE C57.12.91

Standard Test Code for Dry-Type Distribution and Power Transformers

IEEE C57.13

Standard Requirements for Instrument Transformers

IEEE C57.94

Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers-Revision of ANSI C57.94-1956

IEEE C62.41

IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits

IEEE C63.14

American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD)

IEEE C95.1

Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz-Incorporates C95.1a; Amendment 2B: 06/24/2004

IEEE C95.3

Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz 300 GHz

IEEE SI 10

Use of the International System of Units (SI): The Modern Metric System

IEEE Y32.9

Graphic Symbols for Electrical Wiring and Layout Diagrams Used in Architecture and Building Construction