|
ASME A112.1.2 |
Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water- Connected Receptors) |
|
ASME A112.18.1 |
Plumbing Fixture Fittings |
|
ASME A112.19.1M |
Enameled Cast Iron Plumbing Fixtures-Errata - November 1996; Supplement 2 - June 2000 |
|
ASME A112.19.2M |
Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals-Revision and Consolidation of ASME A112.19.2M and ASME A112.19.6 |
|
ASME A112.19.3 |
Stainless Steel Plumbing Fixtures (Designed for Residential Use)-Supplement: September 2002 |
|
ASME A112.19.5 |
Trim for Water-Closet Bowls, Tanks, and Urinals |
|
ASME A112.21.2M |
Roof Drains-Revision of ANSI A112.21.2-1971 |
|
ASME A112.36.2M |
Cleanouts |
|
ASME A112.6.1M |
Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use |
|
ASME A112.6.3 |
Floor Drains and Trench Drains |
|
ASME A13.1 |
Scheme for the Identification of Piping Systems |
|
ASME A17.1 |
Safety Code for Elevators and Escalators-Addenda A: 2005; Supplement: 08/12/2005 |
|
ASME A17.1 HDBK |
Safety Code for Elevators and Escalators |
|
ASME AG- 1 |
Code on Nuclear Air and Gas Treatment-Errata: 02/04; Addenda: 09/30/05 |
|
ASME B1.1 |
Unified Inch Screw Threads (UN and UNR Thread Form) |
|
ASME B1.12 |
Class 5 Interference-Fit Thread |
|
ASME B1.13M |
Metric Screw Threads: M Profile |
|
ASME B1.16M |
Gages and Gaging for Metric M Screw Threads-Revision of ANSI B1.16-1972 |
|
ASME B1.2 |
Gages and Gaging for Unified Inch Screw Threads-Errata May 1992 |
|
ASME B1.20.1 |
Pipe Threads, General Purpose (Inch)-Revision and Redesignation of ASME/ANSI B2.1-1968 |
|
ASME B1.20.3 |
Dryseal Pipe Threads (Inch)-Revision and Redesignation of B2.2- 1968 |
|
ASME B1.20.5 |
Gaging for Dryseal Pipe Threads (Inch) |
|
ASME B1.20.7 |
Hose Coupling Screw Threads (Inch) |
|
ASME B1.21M |
Metric Screw Threads: MJ Profile |
|
ASME B1.22M |
Gages and Gaging for MJ Series Metric Screw Threads-Revision of ANSI B1.22-1978 |
|
ASME B1.3M |
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)-Errata - 1994 |
|
ASME B1.5 |
Acme Screw Threads |
|
ASME B1.7M |
Nomenclature, Definitions, and Letter Symbols for Screw Threads- Revision of ANSI B1.7-1977 |
|
ASME B1.8 |
Stub Acme Screw Threads |
|
ASME B1.9 |
Buttress Inch Screw Threads 7 Degrees/45 Degrees Form with 0.6 Pitch Basic Height of Thread Engagement |
|
ASME B107.1 |
Socket Wrenches, Hand (Inch Series) |
|
ASME B107.10M |
Handles and Attachments for Hand Socket Wrenches - Inch and Metric Series |
|
ASME B107.14 |
Hand Torque Tools (Mechanical) |
|
ASME B107.15 |
Flat Tip Screwdrivers |
|
ASME B107.16M |
Shears (Metal Cutting, Hand) |
|
ASME B107.17M |
Gages, Wrench Openings, Reference |
|
ASME B107.19 |
Pliers, Retaining Ring |
|
ASME B107.2 |
Socket Wrenches, Extensions, Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series) |
|
ASME B107.20 |
Pliers: Lineman´s, Iron Worker´s, Gas, Glass, Fence, and Battery |
|
ASME B107.21 |
Wrench, Crowfoot |
|
ASME B107.23M |
Pliers: Multiple Position, Adjustable |
|
ASME B107.4 |
Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded) |
|
ASME B107.5M |
Socket Wrenches, Hand (Metric Series) |
|
ASME B107.8 |
Adjustable Wrenches-Replaces ASME B107.8M |
|
ASME B15.1 |
Safety Standard for Mechanical Power Transmission Apparatus |
|
ASME B16.1 |
Cast Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250 |
|
ASME B16.10 |
Face-to-Face and End-to-End Dimensions of Valves |
|
ASME B16.11 |
Forged Fittings, Socket-Welding and Threaded |
|
ASME B16.12 |
Cast Iron Threaded Drainage Fittings |
|
ASME B16.14 |
Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads |
|
ASME B16.15 |
Cast Bronze Threaded Fittings Classes 125 and 250 |
|
ASME B16.15 INTERPRETATIONS |
Interpretations to B16.5-1985 Cast Bronze Threaded Fittings Classes 125 and 250-Includes Interpretations No. 1 |
|
ASME B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
|
ASME B16.20 |
Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed-Addenda A - 07/21/2000 |
|
ASME B16.21 |
Nonmetallic Flat Gaskets for Pipe Flanges |
|
ASME B16.22 |
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings |
|
ASME B16.23 |
Cast Copper Alloy Solder Joint Drainage Fittings: DWV- Errata:March 2003 |
|
ASME B16.24 |
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500, and 2500 |
|
ASME B16.25 |
Buttwelding Ends |
|
ASME B16.25 INTERPRETATIONS |
Interpretations to B16.25-1997 Buttwelding Ends- Includes Interpretation No. 1 |
|
ASME B16.26 |
Cast Copper Alloy Fittings for Flared Copper Tubes |
|
ASME B16.28 |
Wrought Steel Buttwelding Short Radius Elbows and Returns |
|
ASME B16.29 |
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV |
|
ASME B16.3 |
Malleable Iron Threaded Fittings Classes 150 and 300 |
|
ASME B16.33 |
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 PSI (Sizes NPS 1/2 Through NPS 2) |
|
ASME B16.34 |
Valves - Flanged, Threaded, and Welding End |
|
ASME B16.34 INTERPRETATIONS |
Interpretations to B16.34-1996 Valves - Flanged, Threaded, and Welding End-Includes Interpretation No. 2 |
|
ASME B16.36 |
Orifice Flanges |
|
ASME B16.36 INTERPRETATIONS |
Interpretations to B16.36-1996 Orifice Flanges |
|
ASME B16.38 |
Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum) |
|
ASME B16.39 |
Malleable Iron Threaded Pipe Unions Classes 150, 250, and 300 |
|
ASME B16.4 |
Gray Iron Threaded Fittings - Classes 125 and 250 |
|
ASME B16.4 INTERPRETATIONS |
Interpretations to B16.4-1998 - Gray Iron Threaded Fittings - Classes 125 and 250 |
|
ASME B16.40 |
Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems-Erratum: July 2003 now incorporated (pg ´v´) |
|
ASME B16.42 |
Ductile Iron Pipe Flanges and Flanged Fittings Classes 150 and 300 |
|
ASME B16.5 |
Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard-Revision of ASME B16.5-1996 |
|
ASME B16.5 INTERPRETATIONS |
Interpretations to B16.5-1996 Pipe Flanges and Flanged Fittings-Includes Interpretation No. 3 |
|
ASME B16.9 |
Factory-Made Wrought Buttwelding Fittings |
|
ASME B16.9 INTERPRETATIONS |
Interpretations to B16.9-1993 Factory-Made Wrought Steel Buttwelding Fittings-Includes Interpretation No. 1 |
|
ASME B17.1 |
Keys and Keyseats |
|
ASME B17.2 |
Woodruff Keys and Keyseats-Revision of USAS B17F- 1930 |
|
ASME B18.1.3M |
Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller- Errata - October 1985 |
|
ASME B18.10 |
Track Bolts and Nuts |
|
ASME B18.12 |
Glossary of Terms for Mechanical Fasteners |
|
ASME B18.13 |
Screw and Washer Assemblies - Sems (Inch Series)-Addenda A - 1998 |
|
ASME B18.13.1M |
Screw and Washer Assemblies - Sems (Metric Series)- Supersedes IFI 531: 1982 |
|
ASME B18.15 |
Forged Eyebolts |
|
ASME B18.18.1M |
Inspection and Quality Assurance for General Purpose Fasteners |
|
ASME B18.18.2M |
Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners |
|
ASME B18.18.2M SUPPLEMENT |
Supplement of ASME B18.18.2m-1987 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners |
|
ASME B18.18.3M |
Inspection and Quality Assurance for Special Purpose Fasteners |
|
ASME B18.18.4M |
Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications |
|
ASME B18.2.1 |
Square and Hex Bolts and Screws (Inch Series)-Addenda A - 10/08/1999; Erratum July 2003 |
|
ASME B18.2.2 |
Square and Hex Nuts (Inch Series) |
|
ASME B18.2.3.1M |
Metric Hex Cap Screws |
|
ASME B18.2.3.2M |
Metric Formed Hex Screws |
|
ASME B18.2.3.4M |
Metric Hex Flange Screws-Supersedes IFI 536:1982 |
|
ASME B18.2.3.9M |
Metric Heavy Hex Flange Screws-Supersedes IFI 538:1982 |
|
ASME B18.2.4.2M |
Metric Hex Nuts, Style 2 |
|
ASME B18.2.4.6M |
Metric Heavy Hex Nuts-Errata - April 1981 |
|
ASME B18.21.1 |
Lock Washers (Inch Series) |
|
ASME B18.21.2M |
Lock Washers (Metric Series)-Supersedes IFI 532: 1982 |
|
ASME B18.22.1 |
Plain Washers-Reaffirmation and Redesignation of ASA B27.2- 1965 |
|
ASME B18.24 |
Part Identifying Number (PIN) Code System Standard for B18 Fastener Products-Supersedes ASME B18.24.1, B18.24.2, and B18.24.3 |
|
ASME B18.27 |
Tapered and Reduced Cross Section Retaining Rings (Inch Series)- Incorporating ASME B18.27.1, B18.27.2, B18.27.3, B18.27.4, and B18.27.5; Addenda A - 1999; Addenda B - 11/15/2000 |
|
ASME B18.3 |
Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series)-Date of Issuance: 4/29/2005 |
|
ASME B18.3.1M |
Socket Head Cap Screws (Metric Series) |
|
ASME B18.3.2M |
Metric Series Hexagon Keys and Bits |
|
ASME B18.3.3M |
Hexagon Socket Head Shoulder Screws (Metric Series) |
|
ASME B18.3.4M |
Hexagon Socket Button Head Cap Screws (Metric Series) |
|
ASME B18.3.5M |
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) |
|
ASME B18.3.6M |
Metric Series Socket Set Screws |
|
ASME B18.5 |
Round Head Bolts (Inch Series) |
|
ASME B18.5.2.2M |
Metric Round Head Square Neck Bolts |
|
ASME B18.6.2 |
Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws (Inch Series) |
|
ASME B18.6.3 |
Machine Screws and Machine Screw Nuts |
|
ASME B18.6.5M |
Metric Thread-Forming and Thread-Cutting Tapping Screws-2000 Edition; Revision of ANSI/ASME B18.6.5M-1986 |
|
ASME B18.6.7M |
Metric Machine Screws-2000 Edition; Revision of ASME B18.6.7M-1985(1993); Supersedes IFI 513: 1981 |
|
ASME B18.7.1M |
Metric General Purpose Semi-Tubular Rivets |
|
ASME B19.3 |
Safety Standard for Compressors for Process Industries-Addenda A - 11/23/1994; Addenda B - 1995 |
|
ASME B20.1 |
Safety Standard for Conveyors and Related Equipment-Revision of ASME B20.1-2000 |
|
ASME B27.6 |
General Purpose Uniform Cross Section Spiral Retaining Rings |
|
ASME B27.7 |
General Purpose Tapered and Reduced Cross Section Retaining Rings |
|
ASME B27.8M |
General Purpose Metric Tapered and Reduced Cross Section Retaining Rings Type 3DM1 - Heavy Duty External Rings Type 3EM1 - Reinforced "E" Rings Type 3FM1 - "C" Type Rings |
|
ASME B30.10 |
Hooks Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings |
|
ASME B30.10 INTERPRETATIONS |
Interpretations to B30.10-1993 Hooks |
|
ASME B30.11 |
Monorails and Underhung Cranes - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings |
|
ASME B30.16 |
Overhead Hoists (Underhung) |
|
ASME B30.16 INTERPRETATIONS |
Interpretations to B30.16-1998 Overhead Hoists (Underhung) |
|
ASME B30.17 |
Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) |
|
ASME B30.2 |
Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) |
|
ASME B30.22 |
Articulating Boom Cranes |
|
ASME B30.5 |
Mobile and Locomotive Cranes |
|
ASME B30.8 |
Floating Cranes and Floating Derricks |
|
ASME B30.9 |
Slings |
|
ASME B31.1 |
Power Piping |
|
ASME B31.1 CASES NO. 25 |
Cases No. 25 to B31.1 Power Piping |
|
ASME B31.1 CASES NO. 26 |
Cases No. 26 to B31.1 Power Piping |
|
ASME B31.1 INTERPRETATIONS |
Interpretations to B31.1-1998 Power Piping-Includes Interpretations No. 2 Through 6, 8 through 10, 13,15, 17 through 25, and 27 through 31 |
|
ASME B31.2 |
Fuel Gas Piping |
|
ASME B31.3 |
Process Piping |
|
ASME B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
|
ASME B31.5 |
Refrigeration Piping and Heat Transfer Components-Addenda: 2004 |
|
ASME B31.8 |
Gas Transmission and Distribution Piping Systems |
|
ASME B31.8S |
Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8 |
|
ASME B31.9 |
Building Services Piping |
|
ASME B31.9 INTERPRETATIONS |
Interpretations to B31.9-1996 Building Services Piping-Includes Interpretation No. 1-3 |
|
ASME B32.3M |
Preferred Metric Sizes for Flat Metal Products |
|
ASME B32.4M |
Preferred Metric Sizes for Round, Square, Rectangle and Hexagon Metal Products-Revision of ANSI B32.4-1977 |
|
ASME B32.5 |
Preferred Metric Sizes for Tubular Metal Products Other Than Pipe- Errata - 1996 |
|
ASME B36.10M |
Welded and Seamless Wrought Steel Pipe |
|
ASME B36.19M |
Stainless Steel Pipe |
|
ASME B4.1 |
Preferred Limits and Fits for Cylindrical Parts |
|
ASME B40.100 |
Pressure Gauges and Gauge Attachments-Incorporating ASME B40.1-1998 and ASME B40.7-1998; Addenda A - 12/31/2001 |
|
ASME B46.1 |
Surface Texture (Surface Roughness, Waviness, and Lay) |
|
ASME B47.1 |
Gage Blanks-Revision of ANSI/ASME B47.1AM-1982 |
|
ASME B5.10 |
Machine Tapers |
|
ASME B5.18 |
Spindle Noses and Tool Shanks for Milling Machines |
|
ASME B5.1M |
T-Slots, Their Bolts, Nuts, and Tongues-Revision of ANSI B5.1-1975; Should Be Used Instead of ANSI B5.1. Which Was Cancelled in 1985 |
|
ASME B5.40 |
Spindle Noses and Tool Shanks for Horizontal Boring Machines |
|
ASME B5.50 |
"V" Flange Tool Shanks for Machining Centers with Automatic Tool Changers-Errata - February 1995 |
|
ASME B5.54 |
Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers-k |
|
ASME B5.8 |
Chucks and Chuck Jaws |
|
ASME B5.9 |
Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes |
|
ASME B56.1 |
Safety Standard for Low Lift and High Lift Trucks |
|
ASME B56.1 INTERPRETATIONS |
Interpretations to B56.1 Safety Standard for Low Lift and High Lift Trucks |
|
ASME B56.11.4 |
Hook-Type Forks and Fork Carriers for Powered Industrial Forklift Trucks-Special Notice - February 1993; Addenda A - 7/22/1994 |
|
ASME B94.19 |
Milling Cutters and End Mills |
|
ASME B94.2 |
Reamers |
|
ASME B94.51M |
Specifications for Band Saw Blades (Metal Cutting) |
|
ASME B94.54 |
Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories |
|
ASME B94.6 |
Knurling |
|
ASME CSD- 1 |
Controls and Safety Devices for Automatically Fired Boilers |
|
ASME CSD-1 INTERPRETATIONS |
Interpretations to CSD-1 Controls and Safety Devices for Automatically Fired Boilers-Includes Interpretations Dated February 1989 thru June 2001 |
|
ASME HST- 1 |
Performance Standard for Electric Chain Hoists |
|
ASME HST- 3 |
Performance Standard for Manually Lever Operated Chain Hoists |
|
ASME HST- 4 |
Performance Standard for Overhead Electric Wire Rope Hoists |
|
ASME MH1 |
Pallets, Slip Sheets, and Other Bases for Unit Loads |
|
ASME PTC 10 |
Performance Test Code on Compressors and Exhausters |
|
ASME PTC 19.11 |
Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle |
|
ASME PTC 19.5 |
Flow Measurement |
|
ASME PTC 23 |
Atmospheric Water Cooling Equipment |
|
ASME PTC 4 |
Fire Steam Generators-Revision of ASME PTC 4.1- 1964(R1991) |
|
ASME SEC I A2001 |
2001 Summary of Changes |
|
ASME SEC I A2002 |
2002 Summary of Changes |
|
ASME SEC I A2003 |
2003 Summary of Changes |
|
ASME SEC I ADD |
BPVC SECTION I 1999 Addenda, Rules for Construction of Power Boilers-Non-Interfiled |
|
ASME SEC I CODES |
Codes, Standards, and Specifications Referenced in Text |
|
ASME SEC I FORMS/GUIDES |
Data Report Forms and Guides |
|
ASME SEC I INDEX |
Index |
|
ASME SEC I INTRODUCTION |
Introduction |
|
ASME SEC I MA I |
Appendix I - Mandatory Preparation of Technical Inquiries to the Boiler and Pressure Vessel Committee |
|
ASME SEC I NMA A |
Appendix A Explanation of the Code Containing Matter Not Mandatory Unless Specifically Referred to in the Rules of the Code |
|
ASME SEC I PT PB |
Part PB Requirements for Boilers Fabricated by Brazing |
|
ASME SEC I PT PEB |
Part PEB Requirements for Electric Boilers |
|
ASME SEC I PT PFH |
Part PFH Optional Requirements for Feedwater Heater (When Located within Scope of Section I Rules) |
|
ASME SEC I PT PFT |
Part PFT Requirements for Firetube Boilers |
|
ASME SEC I PT PG |
Part PG General Requirements for All Methods of Construction |
|
ASME SEC I PT PMB |
Part PMB Requirements for Miniature Boilers |
|
ASME SEC I PT PR |
Part PR Requirements for Boilers Fabricated by Riveting |
|
ASME SEC I PT PVG |
Part PVG Requirements for Organic Fluid Vaporizers |
|
ASME SEC I PT PW |
Part PW Requirements for Boilers Fabricated by Welding |
|
ASME SEC I PT PWT |
Part PWT Requirements for Watertube Boilers |
|
ASME SEC I SI UNITS |
SI Units |
|
ASME SEC IV A2003 |
2003 Summary of Changes |
|
ASME SEC IV A2004 |
2004 Summary of Changes |
|
ASME SEC IV A2005 |
2005 Summary of Changes |
|
ASME SEC IV ADD |
BPVC SECTION IV 1999 Addenda, Rules for Construction of Heating Boilers-Non-Interfiled |
|
ASME SEC IV INDEX |
Index |
|
ASME SEC IV INDEX |
Index |
|
ASME SEC IV INTRO |
INTRODUCTION |
|
ASME SEC IV INTRO |
Introduction |
|
ASME SEC IV MA APP 1 |
Mandatory Appendix 1 Submittal of Technical Inquiries to the Boiler and Pressure Vessel Committee |
|
ASME SEC IV MA APP 2 |
Mandatory Appendix 2 Codes, Standards, and Specifications Referenced in Text |
|
ASME SEC IV MA APP 3 |
Mandatory Appendix 3 Adhesive Attachment of Nameplates to Casing |
|
ASME SEC IV MA APP 5 |
Mandatory Appendix 5 Vacuum Boilers |
|
ASME SEC IV MA APP 6 |
Mandatory Appendix 6 Standard Units for Use in Equations |
|
ASME SEC IV NMA APP B |
Appendix B Method of Checking Safety Valve and Safety Relief Valve Capacity by Measuring Maximum Amount of Fuel that Can be Burned |
|
ASME SEC IV NMA APP B |
Nonmandatory Appendix B Method of Checking Safety Valve and Safety Relief Valve Capacity by Measuring Maximum Amount of Fuel that Can be Burned |
|
ASME SEC IV NMA APP C |
Nonmandatory Appendix C Examples of Method of Calculating a Welded Ring Reinforced Furnace |
|
ASME SEC IV NMA APP D |
Nonmandatory Appendix D Examples of Methods of Computation of Openings in Boiler Shells |
|
ASME SEC IV NMA APP E |
Nonmandatory Appendix E Terminology |
|
ASME SEC IV NMA APP F |
Nonmandatory Appendix F Quality Control System |
|
ASME SEC IV NMA APP H |
Nonmandatory Appendix H List of Abbreviations and Addresses |
|
ASME SEC IV NMA APP I |
Nonmandatory Appendix I Specifications for Test Method for Water Absorption of Plastics |
|
ASME SEC IV NMA APP K |
Nonmandatory Appendix K Guide to Information Appearing on Certificate of Authorization |
|
ASME SEC IV NMA APP L |
Nonmandatory Appendix L Guide to Manufacturer´s Data Report Forms |
|
ASME SEC IV NMA APP M |
Nonmandatory Appendix M Guidance for the Use of U.S. Customary and SI Units in the ASME Boiler and Pressure Vessel Code |
|
ASME SEC IV PT HC A- 1 |
Article 1 General |
|
ASME SEC IV PT HC A- 1 |
Article 1 General |
|
ASME SEC IV PT HC A- 2 |
Article 2 Material Requirements |
|
ASME SEC IV PT HC A- 3 |
Article 3 Design |
|
ASME SEC IV PT HC A- 3 |
Article 3 Design |
|
ASME SEC IV PT HC A- 4 |
Article 4 Tests |
|
ASME SEC IV PT HC A- 5 |
Article 5 Quality Control and Inspection |
|
ASME SEC IV PT HF A- 1 |
Article 1 General |
|
ASME SEC IV PT HF A- 2 |
Article 2 Material Requirements |
|
ASME SEC IV PT HF A- 2 |
Article 2 Material Requirements |
|
ASME SEC IV PT HF A- 3 |
Article 3 Design Stresses and Minimum Thicknesses |
|
ASME SEC IV PT HF A- 3 |
Article 3 Design Stresses and Minimum Thicknesses |
|
ASME SEC IV PT HF-HB A-10 |
Article 10 General Requirements |
|
ASME SEC IV PT HF-HB A-11 |
Article 11 Material Requirements |
|
ASME SEC IV PT HF-HB A-12 |
Article 12 Brazing Processes, Procedures, and Qualifications |
|
ASME SEC IV PT HF-HB A-13 |
Article 13 Design |
|
ASME SEC IV PT HF-HB A-14 |
Article 14 Fabrication Requirements |
|
ASME SEC IV PT HF-HB A-15 |
Article 15 Inspection and Stamping |
|
ASME SEC IV PT HF- HW A-4 |
Article 4 General Requirements |
|
ASME SEC IV PT HF-HW A-5 |
Article 5 Material Requirements |
|
ASME SEC IV PT HF- HW A-6 |
Article 6 Welding Processes and Qualifications |
|
ASME SEC IV PT HF-HW A-6 |
Article 6 Welding Processes and Qualifications |
|
ASME SEC IV PT HF- HW A-7 |
Article 7 Design of Weldments |
|
ASME SEC IV PT HF-HW A-8 |
Article 8 Fabrication Requirements |
|
ASME SEC IV PT HF- HW A-8 |
Article 8 Fabrication Requirements |
|
ASME SEC IV PT HF- HW A-9 |
Article 9 Inspection |
|
ASME SEC IV PT HF-HW A-9 |
Article 9 Inspection |
|
ASME SEC IV PT HG A- 1 |
Article 1 Scope and Service Restrictions |
|
ASME SEC IV PT HG A- 1 |
Article 1 Scope and Service Restrictions |
|
ASME SEC IV PT HG A- 2 |
Article 2 Material Requirements |
|
ASME SEC IV PT HG A- 3 |
Article 3 Design |
|
ASME SEC IV PT HG A- 3 |
Article 3 Design |
|
ASME SEC IV PT HG A- 4 |
Article 4 Pressure Relieving Devices |
|
ASME SEC IV PT HG A- 4 |
Article 4 Pressure Relieving Devices |
|
ASME SEC IV PT HG A- 5 |
Article 5 Tests, Inspection, and Stamping |
|
ASME SEC IV PT HG A- 5 |
Article 5 Tests, Inspection, and Stamping |
|
ASME SEC IV PT HG A- 6 |
Article 6 Instruments, Fittings, and Controls |
|
ASME SEC IV PT HG A- 6 |
Article 6 Instruments, Fittings, and Controls |
|
ASME SEC IV PT HG A- 7 |
Article 7 Installation Requirements |
|
ASME SEC IV PT HG A- 7 |
Article 7 Installation Requirements |
|
ASME SEC IV PT HLW A- 1 |
Article 1 General |
|
ASME SEC IV PT HLW A- 2 |
Article 2 Material Requirements |
|
ASME SEC IV PT HLW A- 3 |
Article 3 Design |
|
ASME SEC IV PT HLW A- 4 |
Article 4 Design of Weldments |
|
ASME SEC IV PT HLW A- 5 |
Article 5 Tests |
|
ASME SEC IV PT HLW A- 6 |
Article 6 Inspection and Stamping |
|
ASME SEC IV PT HLW A- 7 |
Article 7 Controls |
|
ASME SEC IV PT HLW A- 8 |
Article 8 Installation Requirements |
|
ASME SEC IV PT HLW INTRO |
Introduction |
|
ASME Y14.1 |
Decimal Inch Drawing Sheet Size and Format |
|
ASME Y14.100 |
Engineering Drawing Practices |
|
ASME Y14.13M |
Mechanical Spring Representation |
|
ASME Y14.1M |
Metric Drawing Sheet Size and Format |
|
ASME Y14.24 |
Types and Applications of Engineering Drawings-Revision of ASME Y14.24M-1989 |
|
ASME Y14.2M |
Line Conventions and Lettering |
|
ASME Y14.3 |
Multiview and Sectional View Drawings |
|
ASME Y14.32.1M |
Chassis Frames - Passenger Car and Light Truck - Ground Vechicle Practices |
|
ASME Y14.34M |
Associated Lists |
|
ASME Y14.35M |
Revision of Engineering Drawings and Associated Documents |
|
ASME Y14.36M |
Surface Texture Symbols |
|
ASME Y14.38 |
Abbreviations and Acronyms-Revision and Redesignation of ASME Y1.1-1989; Addenda A-2002 |
|
ASME Y14.41 |
Digital Product Definition Data Practices |
|
ASME Y14.42 |
Digital Approval Systems |
|
ASME Y14.43 |
Dimensioning and Tolerancing Principles for Gages and Fictures- Errata: July 2005 |
|
ASME Y14.4M |
Pictorial Drawing |
|
ASME Y14.5.1M |
Mathematical Definition of Dimensioning and Tolerancing Principles |
|
ASME Y14.5M |
Dimensioning and Tolerancing |
|
ASME Y14.6 |
Screw Thread Representation |
|
ASME Y14.7.1 |
Gear Drawing Standards - Part 1 for Spur, Helical, Double Helical and Rack-Partial Revision of Y14.7-58 |
|
ASME Y14.7.2 |
Gear and Spline Drawing Standards Part 2 - Bevel and Hypoid Gears |
|
ASME Y14.8M |
Castings and Forgings |
|
ASME Y32.4 |
Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture and Building Construction-Revision of ANSI Y32.4-54 |