NAVY AN936

WASHER, TOOTH LOCK

NAVY AN960

WASHER, FLAT

NAVY BB-A- 1034

COMPRESSED AIR, BREATHING

NAVY BB-E- 2879

EXTINGUISHER, FIRE, CARBON DIOXIDE (CO2), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE

NAVY DOD-A- 82720

ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC)

NAVY DOD-D- 23443

DI-(2-ETHYLHEXYL) ADIPATE, TECHNICAL (METRIC)

NAVY DOD-E- 24607

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC)

NAVY DOD-G- 24508

GREASE, HIGH PERFORMANCE, MULTIPURPOSE (METRIC)

NAVY DOD-HDBK- 249

METALS AND ALLOYS, RAPID ON-SITE IDENTIFICATION OF (RECOMMENDED PROCEDURE FOR CHEMICAL SPOT TESTING AND ASSOCIATED PHYSICAL TESTS TO VERIFY METAL ALLOY CLASSIFICATION) (METRIC)

NAVY DOD-I- 24688

INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN- CELL POLYIMIDE FOAM

NAVY DOD-L- 85645

LUBRICANT, DRY FILM, MOLECULAR BONDED

NAVY DOD-P- 24555

PAINT, ALUMINUM, HEAT-RESISTING (650 DEG. C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC)

NAVY DOD-PRF- 24648

PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC)

NAVY DOD-PRF- 85734

LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE

NAVY DOD-STD- 1371

INSPECTION PROCEDURE FOR USE OF ANAEROBIC THREAD LOCKING COMPOUNDS WITH STUDS

NAVY DOD-STD- 2183

BOND TESTING, BABBITT-LINED BEARINGS

NAVY DOD-V- 24657

VALVE ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC)

NAVY FED-STD- 162

HOSE, RUBBER, VISUAL INSPECTION GUIDE FOR

NAVY FED-STD- 245

TOLERANCES FOR ALUMINUM ALLOY AND MAGNESIUM ALLOY WROUGHT PRODUCTS

NAVY FF-T- 276

THIMBLES, ROPE

NAVY FF-T- 791

TURNBUCKLE

NAVY HH-G- 156

GASKET MATERIAL, GENERAL PURPOSE; RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES

NAVY HH-P- 151

PACKING; RUBBER-SHEET, CLOTH-INSERT

NAVY HH-P- 31

PACKING AND LAGGING MATERIAL, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE

NAVY HH-P- 46

PACKING; ASBESTOS, SHEET, COMPRESSED

NAVY L-P- 383

PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED

NAVY L-P- 410

PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS

NAVY L-P- 504

PLASTIC SHEET AND FILM, CELLULOSE ACETATE

NAVY MIL-A- 1154

ADHESIVE, BONDING,

NAVY MIL-A- 17472

ASBESTOS SHEET, COMPRESSED (GASKET MATERIAL)

NAVY MIL-A- 18001

ANODES, SACRIFICIAL ZINC ALLOY

NAVY MIL-A- 18455

ARGON, TECHNICAL

NAVY MIL-A- 19521

ANODE RETAINING SUPPORT PLUGS AND ANODE SELECTION AND INSTALLATION DESIGN CRITERIA FOR SHIPBOARD CONDENSERS AND HEAT EXCHANGERS

NAVY MIL-A- 21366

ADHESIVE, FOR BONDING PLASTIC TABLE TOP MATERIAL TO ALUMINUM

NAVY MIL-A- 21380

ABRASIVE MATERIALS, FOR BLASTING

NAVY MIL-A- 22262

ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING

NAVY MIL-A- 22895

ADHESIVE, METAL IDENTIFICATION PLATE

NAVY MIL-A- 23054

ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED

NAVY MIL-A- 24179

ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION

NAVY MIL-A- 24456

ADHESIVE FOR PLASTIC VIBRATION-DAMPING TILE

NAVY MIL-A- 24641

ACID, HYDROFLUORIC; TECHNICAL

NAVY MIL-A- 24779

ANODES, SACRIFICIAL ALUMINUM ALLOY

NAVY MIL-A- 25463

ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION

NAVY MIL-A- 2877

ALUMINUM ALLOY TAPE

NAVY MIL-A- 3316

ADHESIVES, FIRE-RESISTANT, THERMAL INSULATION

NAVY MIL-A- 5092

ADHESIVE, RUBBER BASE, GENERAL PURPOSE

NAVY MIL-A- 5540

ADHESIVE, POLYCHLOROPRENE

NAVY MIL-A- 81236

ADHESIVE, EPOXY RESIN WITH POLYAMIDE CURING AGENT

NAVY MIL-A- 82484

ADHESIVE AND SEALING COMPOUNDS, CELLULOSE NITRATE BASE SOLVENT TYPE (FOR ORDNANCE USE)

NAVY MIL-A- 8623

ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING

NAVY MIL-A- 9067

ADHESIVE BONDING, PROCESS AND INSPECTION REQUIREMENTS FOR

NAVY MIL-B- 15395

BRAZING ALLOY, SILVER

NAVY MIL-B- 17931

BEARINGS, BALL, ANNULAR, FOR QUIET OPERATION

NAVY MIL-B- 20148

BRAZING SHEET, ALUMINUM ALLOY

NAVY MIL-B- 23071

BLOWERS, MINIATURE, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR

NAVY MIL-B- 24059

BRONZE, NICKEL ALUMINUM; ROD, FLAT PRODUCTS WITH FINISHED EDGES, SHAPES AND FORGINGS

NAVY MIL-B- 28873

BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR

NAVY MIL-B- 5697

BRASS, LAMINATED (SHIM STOCK)

NAVY MIL-B- 5924

BATTING, INSULATION, GLASS FIBERS

NAVY MIL-B- 7949

BEARING, BALL, AIRFRAME, ANTIFRICTION

NAVY MIL-B- 81793

BEARINGS, BALL, ANNULAR FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS

NAVY MIL-B- 81793/4

BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 7P

NAVY MIL-B- 81793/8

BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, FLANGED, CORROSION RESISTANT STEEL, ABEC 7P

NAVY MIL-B- 81819

BEARING, PLAIN, (SELF-ALIGNING SLEEVE & THRUST) SELF- LUBRICATING, HIGH SPEED OSCILLATION

NAVY MIL-B- 81820

BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION, GENERAL SPECIFICATION FOR

NAVY MIL-B- 81934

BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING, GENERAL SPECIFICATION FOR

NAVY MIL-B- 81934/1

BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, 325 DEG. F

NAVY MIL-B- 81934/2

BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, 325 DEG. F

NAVY MIL-B- 81935

BEARINGS, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, GENERAL SPECIFICATION FOR

NAVY MIL-B- 81935/1

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, EXTERNALLY THREADED, -65 TO +325 DEG. F

NAVY MIL-B- 81935/2

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, INTERNALLY THREADED, -65 TO +325 DEG. F

NAVY MIL-B- 81935/3

LOCKING DEVICE, ROD END

NAVY MIL-B- 81935/4

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING NARROW, EXTERNALLY THREADED, -65 TO +325 DEG. F

NAVY MIL-B- 81936

BEARINGS, PLAIN, SELF-ALIGNING, (BECU BALL, CRES RACE), GENERAL SPECIFICATION FOR

NAVY MIL-B- 81936/1

BEARING, PLAIN, SELF-ALIGNING, BE CU BALL, CRES RACE, (WITH STAKING GROOVE), -65 TO +350 DEG. F

NAVY MIL-B- 85560

BEARINGS, FIBER, REINFORCED PLASTIC, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING, GENERAL SPECIFICATION FOR

NAVY MIL-B- 85560/2

BEARING, FIBER REINFORCED PLASTIC, SLEEVE, FLANGED SELF- LUBRICATING; +250 DEG. F

NAVY MIL-B- 857

BOLT, NUTS, AND STUDS

NAVY MIL-B- 8942

BEARINGS, PLAIN, TFE LINED, SELF-ALIGNING

NAVY MIL-B- 8943

BEARINGS, JOURNAL - PLAIN AND FLANGED, TFE LINED

NAVY MIL-B- 8948

BEARINGS, PLAIN, ROD END, TFE LINED, SELF-ALIGNING

NAVY MIL-B- 8976

BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL

NAVY MIL-B- 913

BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS (METRIC)

NAVY MIL-C- 15430

CONDENSERS, STEAM, NAVAL SHIPBOARD

NAVY MIL-C- 15726

COPPER-NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD, AND WIRE

NAVY MIL-C- 15730

COOLERS, FLUID, NAVAL SHIPBOARD: LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER

NAVY MIL-C- 16555

COATING COMPOUND, STRIPPABLE, SPRAYABLE

NAVY MIL-C- 19311

COPPER CHROMIUM ALLOY FORGINGS, WROUGHT ROD, BAR, AND STRIP (COPPER ALLOY NUMBERS 182, 184, AND 185)

NAVY MIL-C- 19836

COOLERS, FLUID, INDUSTRIAL, AIR, MOTOR AND GENERATOR, NAVAL SHIPBOARD

NAVY MIL-C- 20079

CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS

NAVY MIL-C- 21567

COMPOUND, SILICONE, SOFT FILM

NAVY MIL-C- 22263

COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR

NAVY MIL-C- 22520/1

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 20

NAVY MIL-C- 22520/10

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, SMALL, FOR COAXIAL, SHIELDED CONTACTS, FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS

NAVY MIL-C- 22520/2

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 20 THROUGH 28

NAVY MIL-C- 22520/23

CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION: PNEUMATIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8

NAVY MIL-C- 22520/24

CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION: TOOL, FOR LUG TERMINAL AND EXTERNAL POWER PLUG SOCKET CONTACTS, SIZE 22-10

NAVY MIL-C- 22520/3

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN- SERVICE INSPECTION GAGES

NAVY MIL-C- 22520/7

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 16, 20 AND 22

NAVY MIL-C- 22751

COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT: PROCESS FOR APPLICATION OF

NAVY MIL-C- 22787

CLOTH, COATED, FUEL AND FLAME RESISTANT

NAVY MIL-C- 23411

CORROSION PREVENTIVE COMPOUNDS, CLEAR

NAVY MIL-C- 24111

CHROMIUM-NICKEL ALLOY STEEL BARS, RODS AND FORGINGS, CORROSION RESISTANT

NAVY MIL-C- 24356

COUPLINGS, SEGMENTED, AND SPLIT CLAMPS REATTACHABLE, 2- 1/2-, 4-, 6- AND 7-INCH, FOR REFUELING-AT-SEA HOSE

NAVY MIL-C- 24576

CLOTH, SILICA GLASS; CLOTH, COATED, GLASS, SILICONE RUBBER COATED

NAVY MIL-C- 24633

CHAIN, STUD LINK, ANCHOR, LOW ALLOY STEEL, FLASH BUTT WELDED

NAVY MIL-C- 25427

COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT

NAVY MIL-C- 29475

COATING, WATER BORNE POLYURETHANE CAMOUFLAGE

NAVY MIL-C- 3301

COMPOUND, ASPHALTIC, HOT MELT (CAVITY LINING)

NAVY MIL-C- 43616

CLEANING COMPOUNDS, AIRCRAFT SURFACE

NAVY MIL-C- 450

COATING-COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION)

NAVY MIL-C- 5646

CLOTH, AIRPLANE

NAVY MIL-C- 5651

CORD, ELASTIC, EXERCISER AND SHOCK ABSORBER, FOR AERONAUTICAL USE

NAVY MIL-C- 6183

CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS

NAVY MIL-C- 7438

CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION

NAVY MIL-C- 8073

CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED GLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS

NAVY MIL-C- 81302

CLEANING, COMPOUND, SOLVENT, TRICHLOROTRIFLUOROETHANE

NAVY MIL-C- 81773

COATING, POLYURETHANE, ALIPHATIC, WEATHER RESISTANT

NAVY MIL-C- 81986

CORE MATERIAL, PLASTIC HONEYCOMB, NYLON PAPER BASE, FOR AIRCRAFT STRUCTURAL APPLICATIONS

NAVY MIL-C- 82594

CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS

NAVY MIL-C- 82633

COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING (FOR USE AS BOMB TAIL PAD)

NAVY MIL-C- 83360

CLEANING AND LUBRICATING COMPOUND, ELECTRICAL CONTACT

NAVY MIL-C- 85061

COUPLING FUEL LINE, FLEXIBLE, 125 PSI

NAVY MIL-C- 8507

COATING, WASH PRIMER (PRETREATMENT) FOR METALS, APPLICATION OF (FOR AERONAUTICAL USE)

NAVY MIL-C- 8514

COATING COMPOUND, METAL PRETREATMENT, RESIN-ACID

NAVY MIL-C- 85322

COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION

NAVY MIL-C- 85449

CLAMP ASSEMBLY, SADDLE-TYPE, CUSHION, GENERAL SPECIFICATION FOR

NAVY MIL-C- 85449/1

CLAMP ASSEMBLY, SADDLE-TYPE, CUSHIONED, NBR RUBBER, 321 CRES, 275 DEG. F, FUEL RESISTANT, GENERAL PURPOSE

NAVY MIL-C- 85449/3

CLAMP ASSEMBLY, SADDLE-TYPE, CUSHIONED, SILICONE FABRIC, REINFORCED 321 CRES, 500 DEG. F, GENERAL PURPOSE

NAVY MIL-C- 882

CLOTH, DUCK, COTTON OR COTTON-POLYESTER BLEND, SYNTHETIC RUBBER, IMPREGNATED, AND LAMINATED, OIL RESISTANT

NAVY MIL-C- 9084

CLOTH, GLASS, FINISHED, FOR RESIN LAMINATES

NAVY MIL-D- 23003

DECK COVERING COMPOUND, NONSLIP, ROLLABLE

NAVY MIL-D- 24613

DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC

NAVY MIL-D- 24693

DEHYDRATOR, CONDENSER-FILTER, LOW PRESSURE AIR, FOR SPECIAL APPLICATIONS

NAVY MIL-D- 24709

DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64

NAVY MIL-D- 3134

DECK COVERING MATERIALS

NAVY MIL-D- 3135

DECK COVERING UNDERLAY MATERIALS

NAVY MIL-D- 3464

DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION

NAVY MIL-D- 3716

DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION

NAVY MIL-DTL- 1222

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR

NAVY MIL-DTL- 15090

ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111)

NAVY MIL-DTL- 17901

BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED

NAVY MIL-DTL- 18240

FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEG. F MAXIMUM

NAVY MIL-DTL- 19772

VALVES, TEMPERATURE REGULATING, AUTOMATIC, NAVAL SHIPBOARD

NAVY MIL-DTL- 22050

GASKET AND PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM, AND AIR AT MODERATELY HIGH TEMPERATURES

NAVY MIL-DTL- 22520

CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR

NAVY MIL-DTL- 22706

DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE

NAVY MIL-DTL- 23549

GREASE, GENERAL PURPOSE

NAVY MIL-DTL- 24441

PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR

NAVY MIL-DTL- 24441/20

PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE III

NAVY MIL-DTL- 24441/21

PAINT, EPOXY-POLYAMIDE, HAZE GRAY, FORMULA 151, TYPE III

NAVY MIL-DTL- 24441/22

PAINT, EPOXY-POLYAMIDE, WHITE, FORMULA 152, TYPE III

NAVY MIL-DTL- 24441/23

PAINT, EPOXY-POLYAMIDE, DARK GRAY RO1.8, FORMULA 153, TYPE III

NAVY MIL-DTL- 24441/29

PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE IV

NAVY MIL-DTL- 24441/30

PAINT, EPOXY-POLYAMIDE, HAZE GRAY, FORMULA 151, TYPE IV

NAVY MIL-DTL- 24441/31

PAINT, EPOXY-POLYAMIDE, WHITE, FORMULA 152, TYPE IV

NAVY MIL-DTL- 24441/32

PAINT, EPOXY-POLYAMIDE, DARK GRAY RO1.8, FORMULA 153, TYPE IV

NAVY MIL-DTL- 24631

PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC)

NAVY MIL-DTL- 24631/1

PAINT, EPOXY, BLACK R0 1.8, NAVY FORMULA 184, TYPE I (METRIC)

NAVY MIL-DTL- 24671

CLOTH, LINT-FREE, FLUSHING AND CLEANING

NAVY MIL-DTL- 24800

CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS

NAVY MIL-DTL- 5624

TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5

NAVY MIL-DTL- 85052

CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR

NAVY MIL-DTL- 85052/1

CLAMP, LOOP, TUBE-17-7 PH CRES, 275 DEGREES F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT

NAVY MIL-DTL- 85052/2

CLAMP, LOOP, TUBE-17-7 PH CRES, 275 DEGREES F, PHOSPHATE ESTER FLUID RESISTANT

NAVY MIL-DTL- 85052/3

CLAMP, LOOP, TUBE-17-7 PH CRES, 500 DEGREES F

NAVY MIL-DTL- 85052/4

CLAMP SUPPORT - LOOP, CLAMP

NAVY MIL-DTL- 85054

CORROSION PREVENTIVE COMPOUND, CLEAR (AMLGUARD)

NAVY MIL-DTL- 85470

INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH NATO COLD NUMBER S-1745

NAVY MIL-E- 1115

ENAMEL, INTERIOR AND EXTERIOR, ALKYD, WHITE (FORMULA NO. 30)

NAVY MIL-E- 15145

ENAMEL, ZINC DUST PIGMENTED, FRESH WATER PROTECTIVE, FORMULA NO. 102

NAVY MIL-E- 15330

EXPANSION JOINT, PIPE, NONMETALLIC, FIRE-RETARDANT

NAVY MIL-E- 16053

ELECTRODES, WELDING, BARE, ALUMINUM ALLOYS

NAVY MIL-E- 16663

ENAMEL, SEMIGLOSS, (FOR METAL SURFACES OF AMMUNITION AND AMMUNITION CONTAINERS)

NAVY MIL-E- 19933

ELECTRODES AND RODS - WELDING, BARE, CHROMIUM AND CHROMIUM - NICKEL STEELS

NAVY MIL-E- 21562

ELECTRODES AND RODS - WELDING, BARE, NICKEL ALLOY

NAVY MIL-E- 2185

EXTINGUISHER, FIRE, CARBON DIOXIDE (HOSE REEL) SYSTEM (NAVAL SHIPBOARD USE)

NAVY MIL-E- 22118

ENAMEL, ELECTRICAL-INSULATING

NAVY MIL-E- 22200

ELECTRODES, WELDING, COVERED: GENERAL SPECIFICATION FOR

NAVY MIL-E- 22200/1

ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM AND HIGH TENSILE STEEL, AS WELDED OR STRESS-RELIEVED WELD APPLICATION

NAVY MIL-E- 22200/10

ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER LOW-HYDROGEN MEDIUM, HIGH TENSILE AND HIGHER-STRENGTH LOW ALLOY STEELS

NAVY MIL-E- 22200/2

ELECTRODES, WELDING, COVERED (AUSTENITIC CHROMIUM- NICKEL STEEL)

NAVY MIL-E- 22200/3

ELECTRODES, WELDING, COVERED: NICKEL BASE ALLOY; AND COBALT BASE ALLOY

NAVY MIL-E- 22200/8

ELECTRODES, WELDING, COVERED, LOW-HYDROGEN, AND IRON- POWDER LOW-HYDROGEN, CHROMIUM-MOLYBDENUM ALLOY STEEL AND CORROSION RESISTING STEEL

NAVY MIL-E- 23765

ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, GENERAL SPECIFICATION FOR

NAVY MIL-E- 23765/1

ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL

NAVY MIL-E- 23765/2

ELECTRODES AND RODS - WELDING, BARE, SOLID, OR ALLOY CORED; AND FLUXES, LOW ALLOY STEEL

NAVY MIL-E- 23765/3

ELECTRODES AND RODS - WELDING, BARE, SOLID COPPER ALLOY

NAVY MIL-E- 24091

EXTINGUISHER, FIRE PORTABLE, POTASSIUM BICARBONATE, DRY CHEMICAL, CARTRIDGE-OPERATED TYPE

NAVY MIL-E- 24127

EDUCTORS; GASOLINE, OIL, OR WATER

NAVY MIL-E- 24269

EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE

NAVY MIL-E- 24403

ELECTRODES-WELDING FLUX CORED GENERAL SPECIFICATION FOR

NAVY MIL-E- 24403/1

ELECTRODES - WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL

NAVY MIL-E- 24403/2

ELECTRODES - WELDING, FLUX CORED, LOW-ALLOY STEEL

NAVY MIL-E- 24416

EXTINGUISHING SYSTEM, FIRE, FIXED, AQUEOUS POTASSIUM CARBONATE

NAVY MIL-E- 24572

EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 1301) SYSTEM COMPONETS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE)

NAVY MIL-E- 5007

ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR

NAVY MIL-E- 5556

ENAMEL, CAMOUFLAGE, QUICK DRYING

NAVY MIL-E- 5557

ENAMEL, HEAT-RESISTING, GLYCERYL-PHTHALATE, BLACK

NAVY MIL-E- 7729

ENAMEL, GLOSS

NAVY MIL-E- 8593

ENGINES, AIRCRAFT, TURBOSHAFT AND TURBOPROP, GENERAL SPECIFICATION FOR

NAVY MIL-F- 1183

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR

NAVY MIL-F- 1183/1

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; BEND, PIPE, RETURN

NAVY MIL-F- 1183/10

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; UNION, PIPE

NAVY MIL-F- 1183/11

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; UNION ELBOW, PIPE AND UNION TEE, PIPE

NAVY MIL-F- 1183/12

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; WITH FLANGED END(S)

NAVY MIL-F- 1183/2

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; CAP, PIPE

NAVY MIL-F- 1183/3

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; COUPLING, PIPE

NAVY MIL-F- 1183/5

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; ELBOW, PIPE

NAVY MIL-F- 1183/6

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; LATERAL, PIPE

NAVY MIL-F- 1183/7

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; PLUG, PIPE

NAVY MIL-F- 1183/8

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; REDUCER, PIPE

NAVY MIL-F- 1183/9

FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; TEE, PIPE

NAVY MIL-F- 163

FAUCETS, SINGLE AND DOUBLE, COMPRESSION AND SELF-CLOSING TYPE, NAVAL SHIPBOARD

NAVY MIL-F- 17874

FUEL SYSTEMS: AIRCRAFT, INSTALLATION AND TEST OF

NAVY MIL-F- 18180

FLANGES AND FLANGED FITTINGS, PIPE, STEEL CLASSES 150, 300, 400, 600, 900, 1500 AND 2500, GENERAL SPECIFICATION FOR

NAVY MIL-F- 18264

FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF

NAVY MIL-F- 18280

FITTINGS, FLARELESS TUBE, FLUID CONNECTION

NAVY MIL-F- 20236

FITTINGS, TUBE AND PIPE, BUTT-WELDING, 300 P.S.I. AND 775 DEG. F. MAXIMUM

NAVY MIL-F- 20670

FLANGE, PIPE, CARBON STEEL 150 P.S.I., W.S.P. (FOR NAVAL SHIPYARD USE)

NAVY MIL-F- 21467

FITTINGS, FLARELESS, FLUID CONNECTION (SHIPBOARD USE)

NAVY MIL-F- 24202

FITTINGS, BUTT WELDING, SEAMLESS OR WELDED, 70-30 COPPER- NICKEL ALLOY, 700 PSI, 200 DEG. F

NAVY MIL-F- 24227

FITTINGS AND FLANGES, CAST BRONZE, SILVER-BRAZING SUITABLE FOR ULTRASONIC INSPECTION

NAVY MIL-F- 24385

FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEAWATER

NAVY MIL-F- 24402

FILTER (HYDRAULIC), FILTER ELEMENTS (HIGH EFFICIENCY), AND FILTER DIFFERENTIAL PRESSURE INDICATORS, GENERAL SPECIFICATION FOR

NAVY MIL-F- 24402/5

FILTER INDICATORS, DIFFERENTIAL PRESSURE, HYDRAULIC

NAVY MIL-F- 24704

FLANGES, FOUR BOLT SQUARE, HYDRAULIC, GENERAL SPECIFICATION FOR

NAVY MIL-F- 24704/1

FLANGES, FOUR BOLT SQUARE, SOCKET WELD FOR HYDRAULIC SYSTEMS

NAVY MIL-F- 24704/5

FLANGES, FOUR BOLT, INSERT SLEEVES FOR HYDRAULIC SYSTEMS

NAVY MIL-F- 24787

FITTINGS, END, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR

NAVY MIL-F- 24787/1

FITTINGS, END, TYPE F, FL, AND FFL, FLANGE, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES

NAVY MIL-F- 24787/2

FITTINGS, END, TYPE A, 37 DEG. FLARE, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES

NAVY MIL-F- 24787/3

FITTINGS, END, TYPES C AND CL, O-RING SEAL UNION, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES

NAVY MIL-F- 24787/5

FITTINGS, END, TYPE D, HOSE TO HOSE 90 DEGREE ELBOW, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES

NAVY MIL-F- 81177/1

FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, ALLOY STEEL, DESIGN AND USAGE LIMITATIONS FOR

NAVY MIL-F- 81334

FOAM, PLASTIC, FLEXIBLE, OPEN CELL POLYESTER TYPE, POLYURETHANE

NAVY MIL-F- 85421

FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR

NAVY MIL-F- 85421/1

FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE

NAVY MIL-F- 85720

FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, GENERAL SPECIFICATION FOR

NAVY MIL-F- 85720/1

FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR, MALE END

NAVY MIL-F- 85731

FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR

NAVY MIL-F- 85731/1

FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF- LOCKING

NAVY MIL-F- 85731/2

FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING, FORCE LIMITING

NAVY MIL-F- 8615

FUEL SYSTEM COMPONENTS: GENERAL SPECIFICATION FOR

NAVY MIL-F- 8961

FASTENER ELEMENT, SELF-LOCKING, EXTERNALLY THREADED, 450 DEG. F AND 1,200 DEG. F

NAVY MIL-G- 16265

GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)

NAVY MIL-G- 17859

GEAR ASSEMBLY, PROPULSION (NAVAL SHIPBOARD USE)

NAVY MIL-G- 18014

GRATINGS, METAL, BAR TYPE FLOORING, NAVAL SHIPBOARD

NAVY MIL-G- 18015

GRATINGS, METAL, OTHER THAN BAR TYPE (SHIPBOARD USE)

NAVY MIL-G- 18709

GREASE, BALL AND ROLLER BEARING

NAVY MIL-G- 19769

GASKET, SYNTHETIC RUBBER, OIL RESISTANT, SLIDE VALVE (FOR 21 INCH SUBMERGED)

NAVY MIL-G- 21032

GASKET, METALLIC ASBESTOS, SPIRAL WOUND

NAVY MIL-G- 21164

GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353

NAVY MIL-G- 21569

GASKETS, CYLINDER LINER SEAL, SYNTHETIC RUBBER

NAVY MIL-G- 21610

GASKETS, HEAT EXCHANGER, VARIOUS CROSS SECTION RINGS, SYNTHETIC RUBBER

NAVY MIL-G- 23652

GASKET AND PACKING MATERIAL PETROLEUM AND PHOSPHATE ESTER FLUID RESISTANT

NAVY MIL-G- 24696

GASKET, SHEET, NON-ASBESTOS

NAVY MIL-G- 24696/1

GASKET, SHEET NON-ASBESTOS SIZES AND TOLERANCES

NAVY MIL-G- 24716

GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND

NAVY MIL-G- 24748

GASKETS, METALLIC AND RUBBER, FOR USE IN UNION PIPE FITTINGS 1/4 TO 2-INCH NPS WITH VARIOUS FLUIDS FROM -30 DEG. F (-34 DEG. C) TO 400 DEG. F (204 DEG. C)

NAVY MIL-G- 25013

GREASE, AIRCRAFT, BALL AND ROLLER BEARING, NATO CODE NUMBER G-372, METRIC

NAVY MIL-G- 25537

GREASE, AIRCRAFT, HELICOPTER, OSCILLATING BEARING

NAVY MIL-G- 3278

GREASE, AIRCRAFT AND INSTRUMENT (FOR LOW AND HIGH TEMPERATURES)

NAVY MIL-G- 4343

GREASE, PNEUMATIC SYSTEM

NAVY MIL-G- 6032

GREASE, PLUG VALVE, GASOLINE AND OIL RESISTANT, NATO CODE NUMBER G-363, METRIC

NAVY MIL-G- 81827

GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE

NAVY MIL-H- 1237

HINGES, BUTT (FOR SHIPBOARD USE)

NAVY MIL-H- 15021

HOOKS, SNAP BOLT, SWIVEL-EYE, AND RINGS

NAVY MIL-H- 16235

HEATERS, VENTILATION, DUCT TYPE SHIPBOARD

NAVY MIL-H- 18158

HOSE DUCTING, LOW PRESSURE, NAVAL SHIPBOARD PORTABLE, VENTILATING SET USE

NAVY MIL-H- 18160

HOSE ASSEMBLIES, CORRUGATED STEEL, 200LB/IN2 AND 425 DEGREES F MAXIMUM STEAM SERVICE RATING

NAVY MIL-H- 19457

HYDRAULIC FLUID, FIRE-RESISTANT, NON-NEUROTOXIC

NAVY MIL-H- 22072

HYDRAULIC FLUID, CATAPULT, NATO CODE NUMBER H-579

NAVY MIL-H- 22577

HEATING ELEMENTS ELECTRICAL: CARTRIDGE, STRIP AND TUBULAR TYPE

NAVY MIL-H- 24135

HOSE, SYNTHETIC RUBBER, WIRE REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR

NAVY MIL-H- 24135/1

HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE WIRE BRAID OR TWO-SPIRAL AND ONE-WIRE BRAID, HIGH PRESSURE SIZES -4 THROUGH -32)

NAVY MIL-H- 24135/2

HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES SPIRAL WRAPPED, OR TWO-SPIRAL AND ONE-WIRE BRAID, HIGH PRESSURE, SIZES -6 THROUGH -16)

NAVY MIL-H- 24136

HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR

NAVY MIL-H- 24136/1

HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES (LOW PRESSURE SIZES -80 THROUGH -192)

NAVY MIL-H- 24136/2

HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (HIGH PRESSURE SIZES -4 THROUGH -32)

NAVY MIL-H- 24136/3

HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES (LOW PRESSURE SIZES -4 THROUGH -32)

NAVY MIL-H- 24580

HOSE ASSEMBLIES, SYNTHETIC RUBBER, NONCOLLAPSIBLE, FIRE FIGHTING

NAVY MIL-H- 24606

HOSE, FIRE, SYNTHETIC FIBER, DOUBLE JACKETED, TREATED FOR ABRASION RESISTANCE, WITH COUPLINGS, FIRE FIGHTING AND OTHER WATER SERVICE

NAVY MIL-H- 6088

HEAT TREATMENT OF ALUMINUM ALLOYS

NAVY MIL-H- 6875

HEAT TREATMENT OF STEEL RAW MATERIALS

NAVY MIL-H- 7199

HEAT TREATMENT OF WROUGHT COPPER-BERYLLIUM ALLOYS, PROCESS FOR (COPPER ALLOYS: NUMBERS C17000, C17200, C17300, C17500, AND C17510)

NAVY MIL-H- 81200

HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS

NAVY MIL-H- 81581

HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR

NAVY MIL-H- 85800

HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 AND 8000 PSI, GENERAL SPECIFICATION FOR

NAVY MIL-H- 8796

HOSE, AIR DUCT, FLEXIBLE, AIRCRAFT

NAVY MIL-H- 904

HOISTS, CHAIN, HAND-OPERATED, HOOK AND TROLLEY SUSPENSION

NAVY MIL-HDBK- 2193

HYDRAULIC SYSTEM COMPONENTS, SHIP

NAVY MIL-HDBK- 267

GUIDE FOR SELECTION OF LUBRICANTS AND HYDRAULIC FLUIDS FOR USE IN SHIPBOARD EQUIPMENT

NAVY MIL-HDBK- 270

METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)

NAVY MIL-HDBK- 283

STRUCTURAL SHIPBUILDING DETAILS USING TEE STIFFENERS

NAVY MIL-HDBK- 828

LASER SAFETY ON RANGES AND IN OTHER OUTDOORS AREAS

NAVY MIL-HDBK- 844

AIRCRAFT REFUELING HANDBOOK FOR NAVY/MARINE CORPS AIRCRAFT

NAVY MIL-I- 16411

INSULATION FELT, THERMAL, GLASS FIBER

NAVY MIL-I- 17563

IMPREGNANTS FOR CAST OR POWDER METAL COMPONENTS

NAVY MIL-I- 22023

INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE

NAVY MIL-I- 22110

INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER