DLA MS3213

SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF- SEALING, INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF-LOCKING

DLA MS3214

NUT, PLAIN, CLINCH-FLUSH

DLA MS3215

RING, RETAINING, EXTERNAL, "E," REINFORCED (REDUCED SECTION TYPE)

DLA MS3216

RING, RETAINING, EXTERNAL, PRONG-LOCK (REDUCED SECTION TYPE)

DLA MS3217

RING, RETAINING, EXTERNAL, HEAVY DUTY (TAPERED SECTION TYPE)

DLA MS33522

RIVETS, BLIND STRUCTURAL, MECHANICALLY LOCKED AND FRICTION RETAINER SPINDLE (RELIABILITY AND MAINTAINABILITY) DESIGN AND CONSTRUCTION REQUIREMENT FOR

DLA MS33534

STANDARD DIMENSIONS FOR STREAMLINE AND OVAL TUBULAR SHAPES

DLA MS33537

INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR

DLA MS33538

NUT, SHEET SPRING, LIMITATIONS FOR USAGE ON AIRCRAFT

DLA MS33557

NONSTRUCTURAL RIVETS FOR BLIND ATTACHMENT; LIMITATIONS FOR DESIGN AND USAGE

DLA MS33588

NUTS, SELF-LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY USAGE REQUIREMENTS FOR

DLA MS33649

BOSSES, FLUID CONNECTION,INTERNAL STRAIGHT THREAD

DLA MS33651

BOSS AND INSTALLATIONS - AIR CONNECTION

DLA MS33658

FITTING END, HOSE CONNECTION, STANDARD DIMENSIONS FOR

DLA MS33660

TUBING END, HOSE CONNECTION, STANDARD DIMENSIONS FOR

DLA MS33677

FITTING END, TAPER PIPE THREAD, STANDARD DIMENSIONS FOR

DLA MS3369

BOLT, SELF-RETAINING, POSITIVE LOCKING, CRES, 90 KSI FSU, 63 KSI FTU, HEXAGON SLOTTED HEAD, 450 DEG. F AND 650 DEG. F

DLA MS33737

NUT, SHEET SPRING, INSTRUMENT MOUNTING

DLA MS33740

NIPPLE, PNEUMATIC STARTING, 3 INCH ID

DLA MS3376

NUT, SELF-LOCKING, REDUCED HEIGHT, STEEL, 450 DEG. F, 12 POINT, CAPTIVE WASHER

DLA MS3498

SCREW ASSEMBLY, PANEL

DLA MS35190

SCREW, MACHINE 82 DEG. FLAT COUNTERSUNK HEAD, CROSS- RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

DLA MS35191

SCREW, MACHINE 82 DEG. FLAT COUNTERSUNK HEAD, CROSS- RECESSED, CARBON STEEL, CADMIUM PLATED, UNF-2A

DLA MS35198

SCREW, MACHINE - FLAT COUNTERSUNK HEAD, 82 DEGREES, CROSS RECESSED, BRASS, UNC-2A

DLA MS35202

SCREW, MACHINE FLAT COUNTERSUNK HEAD 82 DEG. CROSS RECESSED, ALUMINUM ALLOY ANODIC COATED, UNC-2A (SUPERSEDED AIA/NAS NASM35202)

DLA MS35206

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

DLA MS35207

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNF-2A (IN/MM)

DLA MS35214

SCREW, MACHINE-PAN HEAD, CROSS RECESSED, BRASS, UNC- 2A

DLA MS35215

SCREW, MACHINE, PAN HEAD CROSS RECESSED, BRASS, UNF- 2A

DLA MS35218

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, ALUMINUM ALLOY, UNC-2A

DLA MS35219

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, ALUMINUM ALLOY, UNF-2A

DLA MS35223

SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM PLATED, NC-2A AND UNC-2A

DLA MS35265

SCREW, MACHINE DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL, UNC-2A

DLA MS35266

SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL, UNF-2A

DLA MS35273

SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, BRASS, BLACK CHEMICAL FINISH, UNC-2A

DLA MS35275

SCREW, MACHINE - DRILLED FILLISTER HEAD, SLOTTED CORROSION RESISTING STEEL, PASSIVATED, UNC-2A (CANCELED AND SUPERSEDED BY NASM35275)

DLA MS35276

SCREW MACHINE - DRILLED FILLISTER HEAD SLOTTED CORROSION RESISTING STEEL, PASSIVATED UNF-2A

DLA MS35277

SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, ALUMINUM ALLOY, UNC-2A

DLA MS35295

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), MEDIUM CARBON STEEL, PLAIN FINISH UNC-2A

DLA MS35302

SCREW, CAP, HEXAGON HEAD (FINISHED HEXACON BOLT), ALLOY STEEL, PLAIN FINISH, UNF-2A

DLA MS35307

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT) STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A

DLA MS35308

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT) STEEL, CORROSION RESISTING, PASSIVATED, UNF-2A

DLA MS35309

SCREW, CAP, HEXAGON HEAD - NAVAL BRASS, PLAIN FINISH, UNC-2A

DLA MS35310

SCREW, CAP, HEXAGON HEAD, NAVAL BRASS, PLAIN FINISH, UNF-2A

DLA MS35311

SCREW, CAP, HEXAGON HEAD, NICKEL-COPPER ALLOY, PLAIN FINISH, UNF-2A

DLA MS35333

WASHER, LOCK, FLAT-INTERNAL TOOTH

DLA MS35334

WASHER, LOCK, FLAT, HEAVY, INTERNAL TOOTH

DLA MS35335

WASHER, LOCK, FLAT-EXTERNAL TOOTH

DLA MS35336

WASHER, LOCK COUNTERSUNK, 80 DEG. 82 DEG., EXTERNAL TOOTH (IN/MM)

DLA MS35338

WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES

DLA MS35340

WASHER, LOCK-HELICAL SPRING, EXTRA DUTY (EXTRA-HEAVY) SERIES

DLA MS35355

BOLT, MACHINE, SQUARE HEAD, STEEL, CADMIUM OR ZINC PLATED, UNC-2A

DLA MS35425

NUT PLAIN, WING, UNC-2B

DLA MS35426

NUT, PLAIN, WING, UNF-2B

DLA MS35455

SCREW CAP, SOCKET HEAD-HEXAGON, ALLOY STEEL, UNCOATED, UNC-3A

DLA MS35456

SCREW, CAP, SOCKET HEAD - HEXAGON, ALLOY STEEL, UNCOATED, UNF-3A

DLA MS35457

SCREW, CAP, SOCKET HEAD-HEXAGON, ALLOY STEEL, CADMIUM ON ZINC, UNC-3A

DLA MS35458

SCREW, CAP, SOCKET HEAD-HEXAGON, ALLOY STEEL, CADMIUM ON ZINC, UNF-3A

DLA MS35459

SCREW, CAP, SOCKET HEAD - HEXAGON, ALLOY STEEL, PHOSPHATE, UNC-3A

DLA MS35460

SCREW, CAP, SOCKET HEAD - HEXAGON, ALLOY STEEL, PHOSPHATE, UNF-3A

DLA MS35461

SCREW, CAP, SOCKET HEAD-HEXAGON, STEEL, CORROSION RESISTING, PASSIVATED, UNC-3A

DLA MS35489

GROMMETS, SYNTHETIC AND SILICONE RUBBER, HOT-OIL AND COOLANT RESISTANT

DLA MS35492

SCREW, WOOD, FLAT HEAD, CROSS-RECESSED, STEEL AND BRASS

DLA MS35493

SCREW, WOOD, ROUND HEAD, CROSS-RECESSED, STEEL AND BRASS

DLA MS35494

SCREW, WOOD, FLAT HEAD, SLOTTED, STEEL AND BRASS

DLA MS35495

SCREW, WOOD, ROUND HEAD, SLOTTED, STEEL AND BRASS

DLA MS35644

FILLER NECK: FUEL TANK-MILITARY VEHICLES

DLA MS35649

NUT, PLAIN, HEXAGON, MACHINE SCREW, UNC-2B

DLA MS35650

NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B

DLA MS35671

PIN, GROOVED, HEADLESS LONGITUDINAL TAPER GROOVE, CARBON STEEL

DLA MS35672

PIN, GROOVED, HEADLESS-LONGITUDINAL TAPER GROOVE, CORROSION-RESISTING STEEL

DLA MS35673

PIN, GROOVED, HEADLESS, LONGITUDINAL TAPER GROOVE, BRASS

DLA MS35675

PIN, GROOVED, HEADLESS-LONGITUDINAL STRAIGHT GROOVE, CORROSION-RESISTING STEEL

DLA MS35678

PIN, GROOVED, HEADLESS-LONGITUDINAL CENTER GROOVE, CORROSION-RESISTING STEEL

DLA MS35690

NUT, PLAIN, HEXAGON, UNC-2B AND UNF-2B

DLA MS35691

NUT, PLAIN, HEXAGON (JAM) UNC-2B AND UNF-2B

DLA MS35692

NUT, SLOTTED, HEXAGON, UNC-2B AND UNF-2B

DLA MS35743

RIVET, SOLID, SMALL, PAN HEAD, STEEL, ANNEALED

DLA MS35751

BOLT, SQUARE NECK, ROUND HEAD (CARRIAGE), STEEL, CADMIUM OR ZINC PLATED, UNC-2A

DLA MS35756

KEY, WOODRUFF, STEEL ALLOY, WITH KEYWAY AND KEY SLOT DIMENSIONS

DLA MS35763

BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL, GRADE 5, UNC- 2A AND UNF-2A

DLA MS35764

BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL, GRADE 8, UNC- 2A AND UNF-2A

DLA MS35769

GASKET, METALLIC, ENCASED, ANNULAR, COPPER

DLA MS35790

WASHER, LOCK-COUNTERSUNK, 100 DEG., EXTERNAL TOOTH (IN./MM)

DLA MS35803

WASHER, AIRCRAFT HYDRAULIC PACKING BACKUP

DLA MS35810

PIN, STRAIGHT, HEADED (CLEVIS PIN) STEEL, CADMIUM OR ZINC PLATED

DLA MS35812

CLEVIS, ROD END-ADJUSTABLE AND PLAIN, STEEL

DLA MS35844

PLUG, MACHINE THREAD, MAGNETIC: DRAIN

DLA MS39086

PIN, SPRING-TUBULAR, COILED, HEAVY DUTY

DLA MS39087

HANDLE, BOW

DLA MS39230

ELBOW, PIPE-STREET, 90 DEG (150 AND 300 LBS)

DLA MS39233

COUPLING, PIPE STRAIGHT (150 & 300 POUNDS)

DLA MS45904

WASHER, LOCK, INTERNAL AND EXTERNAL TOOTH

DLA MS45905

NUT, PLAIN - HEXAGON, FINISHED, LEFT HAND

DLA MS500083

HOSE ASSEMBLY, NONMETALLIC: HYDRAULIC AND PNEUMATIC, HIGH PRESSURE, FLARED TUBE

DLA MS51021

SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION RESISTING (CHROME-NICKEL) STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF- LOCKING

DLA MS51023

SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION- RESISTING STEEL, PASSIVATED, UNF-3A, PLAIN AND SELF-LOCKING

DLA MS51029

SETSCREW-HEXAGON SOCKET, FLAT POINT, CORROSION- RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING

DLA MS51031

SETSCREW-HEXAGON SOCKET, FLAT POINT, CORROSION- RESISTING STEEL, PASSIVATED, UNF-3A, PLAIN AND SELF-LOCKING

DLA MS51038

SETSCREW-HEXAGON SOCKET, CONE POINT, CORROSION- RESISTING STEEL, PASSIVATED, UNC-3A AND UNF-3A, PLAIN AND SELF-LOCKING

DLA MS51045

SETSCREW-HEXAGON SOCKET, HALF-DOG POINT, CORROSION- RESISTING STEEL, PASSIVATED UNC-3A

DLA MS51092

WASHER, FLAT

DLA MS51095

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED FOR LOCKING WIRE, STEEL, GRADE 5, CADMIUM PLATED, UNC-2A, PLAIN AND SELF-LOCKING

DLA MS51099

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED FOR LOCKING WIRE, STEEL, CORROSION-RESISTING, PASSIVATED, UNC- 2A

DLA MS51100

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED FOR LOCKING WIRE, STEEL, CORROSION-RESISTING, PASSIVATED, UNF- 2A

DLA MS51107

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK DRILLED FOR COTTER PIN, ALLOY STEEL, GRADE 8, PHOSPHATE COATED, UNC- 2A

DLA MS51108

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK DRILLED FOR COTTER PIN, ALLOY STEEL, GRADE 8, PHOSPHATE COATED, UNF- 2A

DLA MS51336

LUNETTE-COUPLER, DRAWBAR, RING

DLA MS51412

WASHER, FLAT - ROUND, STEEL, GENERAL PURPOSE

DLA MS51413

WASHER, LOCK, FLAT-INTERNAL TOOTH

DLA MS51414

WASHER, LOCK, FLAT-EXTERNAL TOOTH

DLA MS51415

WASHER, LOCK-HELICAL SPRING, REGULAR (MEDIUM) SERIES

DLA MS51469

NUT, PLAIN, HEXAGON (MACHINE SCREW), CARBON STEEL, UNC- 2B

DLA MS51471

NUT, PLAIN, HEXAGON (JAM), CARBON STEEL, UNC-2B

DLA MS51479

SCREW, MACHINE, 82 DEGREE FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, UNF-2A

DLA MS51480

SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNF-3A

DLA MS51481

SCREW, MACHINE, 82 DEGREE FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, UNC-2A

DLA MS51484

SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNC-3A

DLA MS51488

SCREW, CAP HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL, GRADE 8

DLA MS51491

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, GRADE 5 UNC-2A

DLA MS51492

SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, UNC-2A

DLA MS51494

SCREW, EXTERNALLY RELIEVED BODY, FLAT COUNTERSUNK HEAD, 100 DEGREE, CROSS-RECESSED

DLA MS51495

SCREW, EXTERNALLY RELIEVED BODY, FILLISTER HEAD

DLA MS51496

WASHER, FLAT-NARROW SERIES

DLA MS51497

STUD, LOCKED-IN, RING-LOCKED, SERRATED HIGH STRENGTH, OVERSIZE REPLACER

DLA MS51498

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER

DLA MS51499

RIVET, TUBULAR, 100 DEGREE, COUNTERSUNK HEAD

DLA MS51500

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, PIPE TO TUBE, MALE PIPE END, 37 DEGREE FLARED

DLA MS51501

NIPPLE, TUBE, REGULAR HEX, 37 DEGREE

DLA MS51503

ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED

DLA MS51504

ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED

DLA MS51505

ELBOW, TUBE, 90 DEGREE 37 DEGREE FLARED

DLA MS51506

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED

DLA MS51507

ELBOW, TUBE, 90 DEGREE BULKHEAD, 37 DEGREE FLARED

DLA MS51508

ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, 37 DEGREE FLARED

DLA MS51510

TEE, TUBE, 37 DEGREE FLARED

DLA MS51518

PLUG, MACHINE THREAD, 37 DEGREE FLARED

DLA MS51519

NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED

DLA MS51520

NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED

DLA MS51521

ELBOW, TUBE, 90 DEGREE SWIVEL, 37 DEGREE FLARED

DLA MS51522

ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED

DLA MS51523

TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED

DLA MS51524

TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED

DLA MS51525

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED

DLA MS51527

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 90 DEGREE, O-RING, 37 DEGREE FLARED

DLA MS51528

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED

DLA MS51529

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING, 37 DEGREE FLARED

DLA MS51530

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED

DLA MS51531

NUT, TUBE COUPLING, 37 DEGREE

DLA MS51532

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED

DLA MS51533

SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED

DLA MS51534

REDUCER, TUBE, 37 DEGREE FLARED

DLA MS51551

STUD, LOCKED IN-RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH

DLA MS51552

NUT, SELF-LOCKING, PLATE, RIGHT ANGLE FLOATING, 125 KSI FTU 450 DEG.F

DLA MS51575

SCREW, SHOULDER, SLOTTED-HEAD, CORROSION-RESISTING STEEL

DLA MS51576

SCREW, SHOULDER, SOCKET-HEAD, HEXAGON, CORROSION- RESISTANT STEEL

DLA MS51606

PIN, GROOVED, HEADLESS (HALF LENGTH REVERSE TAPER GROOVE) CORROSION RESISTANT STEEL

DLA MS51811

TEE, TUBE, FLARELESS TYPE, HYDRAULIC

DLA MS51812

NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE, HYDRAULIC

DLA MS51814

NIPPLE, TUBE, REGULAR HEX, FLARELESS TYPE, HYDRAULIC

DLA MS51815

ELBOW, PIPE TO TUBE, 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC

DLA MS51816

ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE ON END, FLARELESS TYPE, HYDRAULIC

DLA MS51819

ADAPTER, STRAIGHT, PIPE TO TUBE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC

DLA MS51820

ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC

DLA MS51823

NUT, TUBE COUPLING, FLARELESS TYPE, HYDRAULIC

DLA MS51825

SLEEVE, CLINCH, TUBE FITTING FLARELESS TYPE, HYDRAULIC

DLA MS51833

STUD, LOCKED IN KEY-LOCKED, LIGHTWEIGHT

DLA MS51834

STUD, LOCKED IN KEY-LOCKED, HEAVY DUTY

DLA MS51837

INSERT, SCREW THREAD - THREAD FORMING HOLE DIMENSIONS FOR AND INSTALLATION OF

DLA MS51839

ELBOW, TUBE TO BOSS, 90 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC

DLA MS51840

PLUG, MACHINE THREAD, O-RING

DLA MS51843

ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, FLARELESS TYPE, HYDRAULIC

DLA MS51845

ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEG., STRAIGHT, CLASS 125

DLA MS51846

NIPPLE, PIPE, EXTRA STRONG, BRASS OR COPPER( REFER TO ASTM B687-99)

DLA MS51848

WASHER, LOCK-HELICAL SPRING, HI-COLLAR

DLA MS51849

SCREW, MACHINE - STEEL HEXAGON HEAD, SLOTTED, UNF-2A AND UNC-2A

DLA MS51852

ELBOW, TUBE TO SWIVEL, 90 DEGREE, FLARELESS TYPE, HYDRAULIC

DLA MS51853

TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, FLARELESS TYPE, HYDRAULIC

DLA MS51854

TEE, TUBE TO SWIVEL, SWIVEL ON RUN, FLARELESS TYPE, HYDRAULIC

DLA MS51857

NUT, PUSH-ON, STEEL

DLA MS51858

NUT, PLAIN HEXAGON, PLASTIC NYLON

DLA MS51859

WASHER, FLAT PLASTIC NYLON

DLA MS51860

LOCKNUT, BULKHEAD, 37 DEGREE FLARED AND FLARELESS TYPE, HYDRAULIC

DLA MS51861

SCREW, TAPPING-THREAD FORMING, TYPE AB, PAN HEAD, CROSS-RECESSED

DLA MS51862

SCREW, TAPPING-THREAD FORMING, TYPE AB, FLAT 82 DEGREE COUNTERSUNK HEAD, CROSS-RECESSED

DLA MS51863

SCREW, TAPPING-HIGH PERFORMANCE, THREAD ROLLING, TYPES SF, SW AND TT, PAN HEAD, CROSS RECESSED

DLA MS51864

STUD-PLAIN, GENERAL PURPOSE

DLA MS51866

NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG. F

DLA MS51869

SCREW, TAPPING HIGH PERFORMANCE, THREAD ROLLING, TYPES SF, SW AND TT, HEXAGON WASHER HEAD

DLA MS51889

WASHER, BACK-UP, 37 DEGREE FLARED AND FLARELESS TYPE, HYDRAULIC

DLA MS51890

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP ASSEMBLY, TUBE, FLARELESS TYPE, HYDRAULIC

DLA MS51891

PLUG, TUBE FITTING, THREADED, FLARELESS TYPE, HYDRAULIC

DLA MS51896

SCREW, EXTERNALLY RELIEVED BODY, PAN HEAD, CROSS RECESSED, CORROSION -RESISTING STEEL, UNC-2A

DLA MS51922

NUT SELF-LOCKING, HEXAGON-PREVAILING TORQUE, GENERAL PURPOSE, 250 DEG. F, UNC-2B AND UNF-2B

DLA MS51923

PIN, SPRING-TUBULAR, COILED, STANDARD DUTY

DLA MS51926

CLIP, END, STRAP-TYPE I, CLASS 1 AND CLASS 2

DLA MS51929

BUCKLE, SPRING ACTION

DLA MS51930

PAD EYE WELDING

DLA MS51936

WASHER, FLAT (BURR)

DLA MS51937

BOLT, EYE, SHOULDER UNC-2A AND UNF-2A

DLA MS51939

LOOP, STRAP FASTENER (FOOTMAN'S LOOP)

DLA MS51943

NUT SELF-LOCKING, HEXAGON-PREVAILING TORQUE, FOR CRITICAL INSTALLATIONS, 250 DEG. F, UNC-3B AND UNF-3B

DLA MS51946

BOLT, RIBBED SHOULDER, SINGLE END, SPLINED, 3/4 INCH

DLA MS51949

BOLT, SHOULDER, WHEEL MOUNTING, SINGLE END, KEYED HEAD

DLA MS51953

NIPPLE, PIPE, STANDARD, STEEL

DLA MS51957

SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A

DLA MS51958

SCREW, MACHINE, PAN HEAD, CROSS RECESSED, CORROSION RESISTING STEEL, UNF-2A

DLA MS51959

SCREW, MACHINE-FLAT COUNTERSUNK HEAD, 82 DEG., CROSS- RECESSED, CORROSION - RESISTANT STEEL, UNC-2A

DLA MS51961

BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS AND CAGE

DLA MS51963

SETSCREW-HEXAGON SOCKET, CUP POINT, ALLOY STEEL, CADMIUM PLATED, UNC-3A, PLAIN AND SELF-LOCKING

DLA MS51964

SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, CADMIUM PLATED, UNF-3A, PLAIN AND SELF-LOCKING

DLA MS51965

SETSCREW-HEXAGON SOCKET, FLAT POINT, ALLOY STEEL CADMIUM PLATED, UNC-3A, PLAIN AND SELF-LOCKING

DLA MS51966

SETSCREW - HEXAGON SOCKET, FLAT POINT, ALLOY STEEL, CADMIUM PLATED, UNF-3A, PLAIN AND SELF-LOCKING

DLA MS51967

NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNC- 2B(IN./MM)

DLA MS51968

NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNF- 2B (IN./MM)

DLA MS51969

NUT, PLAIN, HEXAGON BRASS, BLACK CHEMICAL FINISH, UNC- 2B

DLA MS51970

NUT, PLAIN, HEXAGON-BRASS, BLACK CHEMICAL FINISH, UNF- 2B

DLA MS51971

NUT, PLAIN, HEXAGON-STEEL, CORROSION RESISTING, 300 SERIES, PASSIVATED, UNC-2B

DLA MS51972

NUT, PLAIN, HEXAGON-STEEL, CORROSION RESISTING, 300 SERIES, PASSIVATED, UNF-2B

DLA MS51973

SETSCREW - HEXAGON SOCKET, CONE POINT, ALLOY STEEL, CADMIUM PLATED, UNC-3A, PLAIN AND SELF-LOCKING

DLA MS51975

SCREW, SHOULDER - SOCKET HEAD, HEXAGON, ALLOY STEEL, CADMIUM PLATED, UNC-3A

DLA MS51977

SETSCREW - HEXAGON SOCKET, HALF-DOG POINT, ALLOY STEEL, CADMIUM PLATED, UNC-3A

DLA MS51981

SETSCREW-HEXAGON SOCKET HEAD, OVAL POINT, ALLOY STEEL, CADMIUM PLATED, UNC-3A

DLA MS51987

PIN, SPRING-TUBULAR, COILED, LIGHT DUTY

DLA MS51988

NUT, SELF-LOCKING, FLANGED, PREVAILING TORQUE, STEEL, CADMIUM, UNC AND UNF

DLA MS51989

STUD, LOCKED IN-RING LOCKED, SERRATED

DLA MS51990

RING, LOCK, SERRATED

DLA MS51991

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED

DLA MS51992

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH

DLA MS51993

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH

DLA MS51994

HOLE PREPARATION-RING LOCKED INSERTS AND STUDS, STANDARD DIMENSIONS FOR

DLA MS51996

HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS, HIGH STRENGTH, STANDARD DIMENSIONS FOR

DLA MS51997

RING, LOCKED, SERRATED-HIGH STRENGTH

DLA MS51998

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR

DLA MS51999

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR

DLA MS52103

HOSE ASSEMBLY, NONMETALLIC: FUEL AND OIL, MEDIUM PRESSURE, FLARED TUBE

DLA MS52104

HOSE ASSEMBLY, RUBBER: FUEL AND OIL, LOW PRESSURE, FLARED TUBE

DLA MS8000

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE

DLA MS8001

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLARELESS

DLA MS8005

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE- TO-FLARE

DLA MS8006

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLARELESS

DLA MS87006

HOOK, CHAIN'S

DLA MS90064

PACKING, PREFORMED, ROUND (FOR USE WITH WAVE GUIDE FLANGES AND DUMMY LOADS)

DLA MS9020

PACKING, PREFORMED - RUBBER, "O" RING

DLA MS9021

PACKING, PREFORMED, "O" RING

DLA MS9024

CLAMP, LOOP-CUSHIONED, JOGGLED, .204 HOLE

DLA MS9033

BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT STEEL, .190 (NO.10)-32, AMS 5735

DLA MS9035

BOLT-MACHINE, STEEL, 12 POINT HEAD, HEAT RESISTANT STEEL, .3125-24 NS

DLA MS90353

FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, 100 DEG. FLUSH HEAD, ALLOY STEEL, 112 K.S.I. FSU

DLA MS90354

FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, PROTRUDING HEAD, ALLOY STEEL, 112 K.S.I. FSU

DLA MS9036

BOLT, MACHINE 12 POINT HEAD, HEAT RESISTANT STEEL, .375-24 UNJF-3A

DLA MS90402

SCREW, CAPTIVE

DLA MS90415

NUT, SELF-LOCKING, STEEL, 160 KSI, 450 DEG. F 12 POINT, CAPTIVE WASHER

DLA MS9047

PIN - SPRING, STEEL, PHOSPHATE FINISH

DLA MS90501

BAR, FLAT, STEEL, CARBON, MEDIUM

DLA MS9058

RING BACK-UP, BOSS CONNECTION AMS 3652, AMS 3656, AMS 3660, AMS 3667

DLA MS9060

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, DRILLED, .190-32 NS

DLA MS9062

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, DRILLED, .3125-24 NS

DLA MS9068

PACKING, PREFORMED - AMS 3304, "O" RING

DLA MS90707

RING, RETAINING, EXTERNAL GRIP

DLA MS90708

RING, RETAINING, EXTERNAL INTERLOCKING

DLA MS90725

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, GRADE 5, CADMIUM PLATED, UNC-2A

DLA MS90726

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, GRADE 5, CADMIUM PLATED, UNF-2A

DLA MS9088

BOLT, MACHINE, STEEL, DRILLED 12 POINT HEAD, .190 (NO. 10)-32 (CADMIUM PLATE)

DLA MS9089

BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .250-28 UNF- 3A

DLA MS9091

BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .375-24 UNF- 3A

DLA MS9100

NUT - HEX, BOSS CONNECTION, CRES

DLA MS9105

PIN, STRAIGHT, HEADLESS, AMS 5688, LOCK

DLA MS9110

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5731 .190-32 UNJF-3A

DLA MS9111

BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5731, .250-28 UNJF-3A

DLA MS9122

SCREW, MACHINE, SLOTTED HEX HEAD, .190-32

DLA MS9123

SCREW, MACHINE, SLOTTED HEX HEAD, .250-28

DLA MS9134

GASKET-TYPE X OR XV ENGINE ACCESSORY DRIVE

DLA MS9135

GASKET TYPE XI ENGINE ACCESSORY DRIVE

DLA MS9136

GASKET-TYPE XII, XIV-A, XIV-B, XIV-E, XVII-A AND XVII-B ENGINE ACCESSORY DRIVE

DLA MS9146

BOLT, MACHINE, 12 POINT HEAD, STEEL, .190-32 UNF-3A

DLA MS9147

BOLT, MACHINE, 12 POINT HEAD, STEEL, .250-28 UNF-3A

DLA MS9148

BOLT, MACHINE, 12 POINT HEAD, STEEL, .3125-24 UNF-3A

DLA MS91527

MOUNT, VIBRATION, CUP-TYPE, CLASSES A-B (FOR USE WITH ELECTRONIC EQUIPMENT IN AIRCRAFT)

DLA MS91528

KNOBS-CONTROL, PLASTIC (ROUND, CONCENTRIC, POINTER, SPINNER, SPINNER SLIP-CLUTCH, BAR, TACTILE, KNOB LOCK POINTER, SLIP-CLUTCH, AND KNOB LOCKS)

DLA MS9194

ELBOW, TUBE-AMS5646, BOSS, 90 DEG.

DLA MS9195

ELBOW, TUBE-AMS 5646, BOSS, 45 DEGREE

DLA MS9196

TEE, TUBE - AMS 5646, BOSS

DLA MS9200

NUT, PLAIN, HEX, BOSS CONNECTION, ALUMINUM

DLA MS9201

NUT, PLAIN, HEX, BOSS CONNECTION, CORROSION RESISTANT STEEL

DLA MS9202

GASKET-METAL, O-RING .062 TUBE X .010 WALL, CRES

DLA MS9204

GASKET-METAL O-RING, .094 TUBE X .010 WALL CRES

DLA MS9206

SCREW, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD .138-40 UNJF-3A

DLA MS9208

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .190-32 UNJF-3A

DLA MS9209

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .250-28 UNJF-3A

DLA MS9210

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .3125-24 UNJF-3A

DLA MS9211

BOLT, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .375-24 UNJF-3A

DLA MS9218

BOLT, MACHINE - STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .250-28 UNJF-3A

DLA MS9226

WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 DEG. F

DLA MS9245

PIN, COTER-CRES, AMS7211

DLA MS9276

WASHER, KEY-CRES, AMS 5510, 180 DEG. LOCKING

DLA MS9316

SCREW, MACHINE AND STEEL, SLOTTED HEXAGON HEAD, .190-32, NI-CAD PLATE

DLA MS9318

RIVET, SOLID-100 DEG. FLUSH HEAD, AMS 7233

DLA MS9319

RIVET, SOLID - UNIVERSAL HEAD, AMS 7233