DLA L-P- 535

PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

DLA MIL-A- 7021

ASBESTOS SHEET, COMPRESSED, FOR FUEL, LUBRICANT, COOLANT, WATER, AND HIGH TEMPERATURE RESISTANT GASKETS

DLA MIL-B- 1083

BALLS, BEARING, FERROUS AND NON-FERROUS (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) GENERAL SPECIFICATION FOR

DLA MIL-B- 23071/29

BLOWERS: MINIATURE, FOR COOLING ELECTRONIC EQUIPMENT TUBEAXIAL (30 WATTS INPUT POWER)

DLA MIL-B- 23071/7

BLOWERS: MINIATURE, FOR COOLING ELECTRONIC EQUIPMENT TUBEAXIAL (14, 40, 17 AND 39 WATTS INPUT POWER)

DLA MIL-B- 23964

BOLT, SELF-RETAINING, POSITIVE LOCKING

DLA MIL-B- 45908

BOLT, EYE, SPECIFICATION FOR

DLA MIL-B- 543

BUCKLES, TONGUELESS AND WEB STRAP

DLA MIL-B- 5687

BEARINGS, SLEEVE, WASHERS, THRUST, SINTERED, METAL POWDER, OIL-IMPREGNATED, GENERAL SPECIFICATION FOR

DLA MIL-B- 6812

BOLTS, AIRCRAFT

DLA MIL-B- 7838

BOLT, INTERNAL WRENCHING, 160 KSI FTU

DLA MIL-B- 83050

BOLT, SELF-RETAINING, IMPEDANCE TYPE

DLA MIL-B- 85667

BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR

DLA MIL-B- 85667/1

BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD, RELIABILITY AND MAINTAINABILITY REQUIREMENTS FOR

DLA MIL-B- 87114

BOLTS, RECESS DRIVE, GENERAL SPECIFICATION FOR

DLA MIL-B- 87114/4

BOLT, HEX HEAD, CROSS RECESS, FULL THREAD, A-286 CRES, 160 KSI FTU

DLA MIL-B- 8831

BOLT, 180 KSI FTU AND 108 KSI FSU, 450 DEG. F, PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR

DLA MIL-B- 8831/1

BOLT, STRAIGHT SHANK, EXPANDABLE ALUMINUM ALLOY SLEEVE, ALLOY STEEL PIN, RELIABILITY AND MAINTAINABILITY REQUIREMENTS FOR

DLA MIL-B- 8906

BOLT, ALLOY STEEL, SHEAR AND TENSILE, (132 KSI MIN FSU AND 220 KSI MIN FTU), 450 DEG. F, SPLINE DRIVE

DLA MIL-C- 14460

CORROSION REMOVING COMPOUND, SODIUM HYDROXIDE BASE, FOR ELECTROLYTIC OR IMMERSION APPLICATION

DLA MIL-C- 24066

CLIP, COMPONENT, NON-ELECTRICAL, GENERAL SPECIFICATION FOR

DLA MIL-C- 24066/2

CLIP, SOLID, SPRING TENSION

DLA MIL-C- 25107

CARBON REMOVING COMPOUND, ORTHODICHLOROBENZENE, FOR ENGINE PARTS

DLA MIL-C- 3133

CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED

DLA MIL-C- 38334

CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES

DLA MIL-C- 38736

CLEANING COMPOUND, SOLVENT MIXTURES

DLA MIL-C- 4109

COUPLING HALVES, LOW PRESSURE, AIR-HOSE, QUICK- DISCONNECT

DLA MIL-C- 43006

CLOTH & STRIP, LAMINATED OR COATED, VINYL-NYLON OR POLYESTER HIGH STRENGTH, FLEXIBLE

DLA MIL-C- 43307

CORD, NYLON, SOLID BRAID, GENERAL PURPOSE

DLA MIL-C- 45300

CAP, FUEL TANK: FOR MILITARY COMBAT AND TACTICAL TRANSPORT VEHICLES

DLA MIL-C- 46110

COATING COMPOUND, OXIDE BLACK

DLA MIL-C- 5040

CORD, FIBROUS, NYLON

DLA MIL-C- 52404

CONNECTIONS: HOSE, FIRE AND WATER

DLA MIL-C- 5501

CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL, GENERAL SPECIFICATION FOR

DLA MIL-C- 5501/1

CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-FLARED TUBE END AND STRAIGHT THREADED BOSS)

DLA MIL-C- 5501/3

CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP- FLARED AND FLARELESS FITTING)

DLA MIL-C- 5501/5

CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-PIPE THREAD)

DLA MIL-C- 5501/7

CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP- PLUG, GENERAL PURPOSE)

DLA MIL-C- 5501/9

CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP- TUBING)

DLA MIL-C- 7413

COUPLINGS, QUICK DISCONNECT, AUTOMATIC SHUTOFF, GENERAL SPECIFICATION FOR

DLA MIL-C- 7515

CORD, NYLON, CORELESS

DLA MIL-C- 83429

CLOTH, PLAIN AND BASKET WEAVE, ARAMID

DLA MIL-C- 8603

CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT

DLA MIL-C- 87129

CORD, FIBROUS, ARAMID BRAIDED

DLA MIL-DTL- 10884

FASTENERS, SNAP

DLA MIL-DTL- 12468

DECONTAMINATING AGENT, STB

DLA MIL-DTL- 13444

HOSE AND HOSE ASSEMBLIES, RUBBER: FUEL AND OIL

DLA MIL-DTL- 13531

HOSE, RUBBER AND HOSE ASSEMBLY, RUBBER (HYDRAULIC, PNEUMATIC, FLEXIBLE)

DLA MIL-DTL- 17111

FLUID, POWER TRANSMISSION

DLA MIL-DTL- 17813

EXPANSION JOINTS, PIPE, METALLIC BELLOWS

DLA MIL-DTL- 22499

SHIM STOCK, LAMINATED

DLA MIL-DTL- 22499/1

SHIM STOCK, LAMINATED, ALUMINUM ALLOY

DLA MIL-DTL- 22499/2

SHIM STOCK, LAMINATED, BRASS

DLA MIL-DTL- 22499/3

SHIM STOCK, LAMINATED, CRES

DLA MIL-DTL- 22529

GROMMET, EDGING

DLA MIL-DTL- 24050

ROPE, FIBROUS-DOUBLE-BRAIDED (NYLON)

DLA MIL-DTL- 25027

NUT, SELF-LOCKING, 250 DEG. F, 450 DEG. F, AND 800 DEG. F

DLA MIL-DTL- 25579

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE GENERAL SPECIFICATION FOR

DLA MIL-DTL- 25579/1

HOSE ASSEMBLY LENGTH MEASUREMENT FOR NAS 1760 AND MS8000 SERIES SEAL, (GLOBE SEAL, OR RADIUS SEAL) TO FLARELESS FITTING END DESIGN

DLA MIL-DTL- 25677

ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 25677/1

ADAPTER, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT

DLA MIL-DTL- 25677/2

CAP, LUBRICATING FITTING, PROTECTIVE, PRESSURE SERVICING ADAPTER

DLA MIL-DTL- 25677/3

NOZZLE, PRESSURE LUBRICATING OIL SERVICING, LOCKING

DLA MIL-DTL- 25995

PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED

DLA MIL-DTL- 26633

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN

DLA MIL-DTL- 26666

HOSE ASSEMBLY, PNEUMATIC, HIGH PRESSURE

DLA MIL-DTL- 27267

HOSE, POLYTETRAFLUOROETHYLENE, 450 DEG. F, MEDIUM PRESSURE

DLA MIL-DTL- 27272

FITTINGS, POLYTETRAFLUOROETHYLENE HOSE, HIGH- TEMPERATURE, MEDIUM-PRESSURE, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 27426

RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION)

DLA MIL-DTL- 27426/1

RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION) MEDIUM DUTY EXTERNAL

DLA MIL-DTL- 27426/2

RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION) HEAVY DUTY EXTERNAL

DLA MIL-DTL- 27426/3

RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION) MEDIUM DUTY INTERNAL

DLA MIL-DTL- 27426/4

RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION) HEAVY DUTY INTERNAL

DLA MIL-DTL- 27536

COUPLING, CLAMP, GROOVED, V-BAND

DLA MIL-DTL- 29181

HASP, HIGH SECURITY, SHROUDED, FOR HIGH AND MEDIUM SECURITY PADLOCK

DLA MIL-DTL- 32000

PAINT, FACE, CAMOUFLAGE

DLA MIL-DTL- 32072

THREAD, POLYESTER

DLA MIL-DTL- 32075

LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE, (GENERAL USE)

DLA MIL-DTL- 3992

HOSE AND HOSE ASSEMBLY, RUBBER: AIR AND VACUUM BRAKE, SYSTEMS

DLA MIL-DTL- 43607

PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE

DLA MIL-DTL- 43734

CLOTH, DUCK, TEXTURED NYLON

DLA MIL-DTL- 44436

CLOTH, CAMOUFLAGE PATTERN, WIND RESISTANT POPLIN, NYLON/COTTON BLEND

DLA MIL-DTL- 45913

NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE

DLA MIL-DTL- 45913/1

NUT, SELF-LOCKING, HEXAGON, NON-METALLIC LOCKING FEATURE, 250 DEG F, UNC/UNF-2B

DLA MIL-DTL- 45913/2

NUT, SELF-LOCKING, HEXAGON ALL-METAL LOCKING FEATURE, 250 DEG. F, UNC/UNF-2B

DLA MIL-DTL- 45913/3

NUT, SELF-LOCKING, HEXAGON NON-METALLIC LOCKING FEATURE, 250 DEG F, UNC/UNF-3B

DLA MIL-DTL- 45913/4

NUT, SELF-LOCKING, HEXAGON ALL-METAL LOCKING FEATURE, 250 DEG. F, UNC/UNF-3B

DLA MIL-DTL- 45938/11

NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (FLOATING, 400 DEG. F)

DLA MIL-DTL- 47113

COMPOUND, HEAT SINK, SILICONE AND/OR NON-SILICONE

DLA MIL-DTL- 5070

ADAPTER, HOSE TO TUBE, PIPE, AND FLANGE, REUSABLE- HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 512

ALUMINUM POWDER, FLAKED, GRAINED, AND ATOMIZED

DLA MIL-DTL- 52471

HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 52525

FITTINGS, HOSE, REUSABLE, FIELD-ATTACHABLE AND CLAMP- HALVES, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 52525/1

FITTINGS, HOSE, SCREW-ON TO 37 DEG. FLARE FEMALE SWIVEL, STRAIGHT, TYPE 100R2

DLA MIL-DTL- 52618

FITTINGS PIPE, ALUMINUM-ALLOY (THREADED), 150-POUND: GENERAL SPECIFICATION FOR

DLA MIL-DTL- 5593

HOSE, AIRCRAFT, LOW PRESSURE, FLEXIBLE

DLA MIL-DTL- 6000

HOSE, RUBBER (FUEL, OIL, COOLANT, WATER, AND ALCOHOL)

DLA MIL-DTL- 6070

PLYWOOD AND VENEER, AIRCRAFT FLAT PANEL

DLA MIL-DTL- 7885/2

RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICAL LOCKED ALLOY STEEL SPINDLE (TYPE I, STYLE A, CLASS 1)

DLA MIL-DTL- 7885/4

RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKEL-COPPER ALLOY SLEEVE, MECHANICALLY LOCKED 15-7PH CRES SPINDLE (TYPE I, STYLE A, CLASS 1)

DLA MIL-DTL- 7885/6

RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED ALLOY STEEL SPINDLE OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1)

DLA MIL-DTL- 7885/8

RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKEL-COPPER ALLOY SLEEVE, MECHANICALLY LOCKED 15-7PH CRES SPINDLE OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1)

DLA MIL-DTL- 83140

WIRE ROPE: STEEL, (STAINLESS STEEL) PREFORMED, NONROTATING, FOR AIRCRAFT RESCUE HOIST AND CARGO HANDLING (WINCHING)

DLA MIL-DTL- 83796

HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 83796/1

HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE

DLA MIL-DTL- 83797

HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 83798

FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 83798/1

FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, STRAIGHT

DLA MIL-DTL- 85069

SLEEVES, FASTENER, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 85069/6

SLEEVES, FASTENER, GROOVED, PROTRUDING HEAD, SHEAR AND TENSION, 1/32 OVERSIZE

DLA MIL-DTL- 85667/7

BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 220 KSI FTU, 450 DEG.

DLA MIL-DTL- 8783

CLAMP, HOSE, FLAT BAND 500 DEG. F, GENERAL SPECIFICATION FOR

DLA MIL-DTL- 8783/1

CLAMP, HOSE, FLAT BAND 500 DEG. F

DLA MIL-DTL- 8788

HOSE, RUBBER, HYDRAULIC, HIGH PRESSURE (3,000 PSI)

DLA MIL-DTL- 8789

FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR

DLA MIL-DTL- 8790

HOSE ASSEMBLIES, RUBBER, HYDRAULIC, HIGH PRESSURE (3000 PSI)

DLA MIL-DTL- 8794

HOSE, ELASTOMERIC - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT

DLA MIL-DTL- 8795

HOSE ASSEMBLIES, ELASTOMERIC - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR

DLA MIL-F- 18866

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS STEEL

DLA MIL-F- 21840

FASTENER TAPES, HOOK & PILE, SYNTHETIC

DLA MIL-F- 25173

FASTENER, CONTROL PANEL, AIRCRAFT EQUIPMENT

DLA MIL-F- 3541

FITTINGS, LUBRICATION, GENERAL SPECIFICATION FOR

DLA MIL-F- 5509

FITTINGS, FLARED TUBE, FLUID CONNECTION

DLA MIL-F- 5591

FASTENERS; PANEL; NONSTRUCTURAL

DLA MIL-F- 6001

FITTINGS, AIRCRAFT, SOLDER TYPE, TUBE

DLA MIL-F- 81177

FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED, ALLOY STEEL, GENERAL SPECIFICATION FOR

DLA MIL-F- 8975

FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM, GENERAL SPECIFICATION FOR

DLA MIL-G- 16491

GROMMET, METALLIC, GENERAL SPECIFICATION FOR

DLA MIL-G- 3036

GROMMETS, RUBBER, HOT-OIL AND COOLANT RESISTANT

DLA MIL-G- 3787

GLASS, LAMINATED, FLAT; (EXCEPT AIRCRAFT)

DLA MIL-G- 46886

GREASE, SILICONE

DLA MIL-H- 9850

HINGE, BUTT, CONTINUOUS PIANO

DLA MIL-HDBK- 131

IDENTIFICATION MARKINGS FOR FASTENERS (HANDBOOK H- 131)

DLA MIL-HDBK- 271/102

AIRCRAFT FASTENERS INSTALLATION & REMOVAL METHODS FOR MS14218 120 DEG. RIVETS

DLA MIL-HDBK- 57

LISTING OF FASTENER MANUFACTURERS' IDENTIFICATION SYMBOLS

DLA MIL-HDBK- 7

LUMBER & ALLIED PRODUCTS

DLA MIL-I- 0081969

INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACTS, TYPE II, CLASS 2, COMPOSITION C

DLA MIL-I- 45932

INSERT, SCREW THREAD - THIN WALL, LOCK IN

DLA MIL-I- 45932/1

INSERT, SCREW THREAD - THIN WALL, LOCK IN

DLA MIL-I- 45932/3

INSERT, SCREW THREAD - THIN WALL, LOCKED IN, OVERSIZE REPLACER

DLA MIL-I- 8846

INSERTS, SCREW-THREAD HELICAL COIL

DLA MIL-K- 25049

KNOBS, CONTROL, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR

DLA MIL-K- 3926

KNOBS, CONTROL (FOR USE WITH ELECTRONIC, COMMUNICATIONS, AND ALLIED EQUIPMENT)

DLA MIL-L- 2710

LINKS, CHAIN, DETACHABLE, REGULAR AND PEAR-SHAPED

DLA MIL-L- 60326

LUBRICANT, FLUOROCARBON TELOMER DISPERSION (FOR USE WITH AMMUNITION)

DLA MIL-L- 83767

LUBRICATING OIL, VACUUM PUMP, MECHANICAL

DLA MIL-M- 81594

MARKING FOILS, FOR HOT STAMP PRINTING OF ELECTRICAL INSULATING MATERIAL

DLA MIL-N- 14411

NICKEL-IRON ALLOY, HIGH MAGNETIC PERMEABILITY SHEET, STRIP, ROD, BAR, AND WIRE

DLA MIL-N- 25027/1

NUT, SELF-LOCKING, HEAVY HEX, (NON-METALLIC INSERT) 250 DEG. AND 450 DEG. F, UNJC-3B, 1/4 THROUGH 2-1/2 INCH NOMINAL DIAMETERS, NICKEL- COPPER ALLOY

DLA MIL-N- 3336

NUT, SHEET SPRING, INSTRUMENT MOUNTING

DLA MIL-N- 45938

NUT PLAIN, CLINCH AND NUT, SELF-LOCKING CLINCH, GENERAL SPECIFICATION FOR

DLA MIL-N- 45938/1

NUT, PLAIN, CLINCH (SELF-CLINCHING, ROUND)

DLA MIL-N- 45938/13

NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF- CLINCHING, KNURLED COLLAR, MINIATURE FLOATING 450 DEG. F AND 600 DEG. F)

DLA MIL-N- 45938/3

NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF- CLINCHING, KNURLED COLLAR, 450 DEG. AND 600 DEG. F)

DLA MIL-N- 45938/4

NUT PLAIN, CLINCH (SELF-CLINCHING, FLUSH)

DLA MIL-N- 45938/5

NUT, SELF-LOCKING CLINCH (SWAGE - CLINCHING, KNURLED SHANK, MINIATURE, 250 DEG. F)

DLA MIL-N- 45938/7

NUT, PLAIN CLINCH AND NUT, SELF-LOCKING CLINCH (KNURLED COLLAR, MINIATURE, 450 DEG. F)

DLA MIL-N- 7786

NICKEL-CHROMIUM ALLOY, SHEET AND STRIP, AGE-HARDENABLE ANNEALED

DLA MIL-N- 85353

NUTS (FASTENERS), INTERNALLY THREADED, PRELOAD LOCKING, 450 DEG. F, 800 DEG. F AND 1200 DEG. F, GENERAL SPECIFICATION FOR

DLA MIL-P- 10971

PIN, SPRING, TUBULAR, (COILED AND SLOTTED)

DLA MIL-P- 14067

POWDERS, METAL, ATOMIZED (FOR USE IN AMMUNITION)

DLA MIL-P- 156

POTASSIUM NITRATE

DLA MIL-P- 16610

PIN, TAPERED, PLAIN

DLA MIL-P- 16685

PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE)

DLA MIL-P- 21143

PIN, STRAIGHT, HEADLESS (DOWEL), GENERAL SPECIFICATION FOR

DLA MIL-P- 217

POTASSIUM PERCHLORATE

DLA MIL-P- 22296

PLASTIC TUBES AND TUBING, POLYTETRAFLUOROETHYLENE (TFE- FLUOROCARBON RESIN), HEAVY WALLED

DLA MIL-P- 23460

PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE- LOCKING

DLA MIL-P- 38477

PLASTIC MATERIAL, PRESSURE SENSITIVE ADHESIVE, FOR AEROSPACE IDENTIFICATION AND MARKING

DLA MIL-P- 45952/1

PIN, QUICK-RELEASE, DETENT

DLA MIL-P- 46112

PLASTIC SHEET AND STRIP, POLYIMIDE

DLA MIL-P- 46144

PLASTIC SHEET, POLYCARBONATE

DLA MIL-P- 50002

PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS

DLA MIL-P- 5673

PIN, STRAIGHT, HEADED

DLA MIL-P- 7105

PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT, GENERAL REQUIREMENTS FOR

DLA MIL-P- 83800

PROPANEDIOL (METRIC) 1,2

DLA MIL-PRF- 11090

CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT

DLA MIL-PRF- 13719

HOSE ASSEMBLY, RUBBER, HYDRAULIC BRAKE

DLA MIL-PRF- 20696

CLOTH, WATERPROOF, WEATHER RESISTANT

DLA MIL-PRF- 25567

LEAK DETECTION COMPOUND, OXYGEN SYSTEMS

DLA MIL-PRF- 3572

LUBRICANT, COLLOIDAL GRAPHITE IN OIL

DLA MIL-PRF- 44103

CLOTH, FIRE, WATER AND WEATHER RESISTANT

DLA MIL-PRF- 47009

COMPOUND, SILICONE, HEAT SINK

DLA MIL-PRF- 5038

TAPE, TEXTILE AND WEBBING, TEXTILE, REINFORCING, NYLON

DLA MIL-R- 24243

RIVETS, BLIND, NONSTRUCTURAL, RETAINED MANDREL, GENERAL SPECIFICATION FOR

DLA MIL-R- 24243/1

RIVETS, BLIND, NONSTRUCTURAL, RETAINED MANDREL, OPEN END, DOMED HEAD, ALUMINUM ALLOY, CARBON STEEL, CORROSION RESISTANT STEEL

DLA MIL-R- 24243/6

RIVETS, BLIND, NONSTRUCTURAL, RETAINED MANDREL, CLOSED- END, DOMED HEAD, ALUMINUM ALLOY

DLA MIL-R- 30500

ROPE, POLYESTER

DLA MIL-R- 3065

RUBBER, FABRICATED PRODUCTS

DLA MIL-R- 3390

RINGS, DEE

DLA MIL-R- 46089

RUBBER, SPONGE, SILICONE, CLOSED CELL

DLA MIL-R- 47195

RIVETS, BLIND, SELF-PLUGGING PREPARATION FOR AND INSTALLATION OF

DLA MIL-R- 47196

RIVET, BUCK TYPE, PREPARATION FOR AND INSTALLATION

DLA MIL-R- 5674

RIVETS, STRUCTURAL, ALUMINUM ALLOY, TITANIUM COLUMBIUM ALLOY, GENERAL SPECIFICATION FOR

DLA MIL-R- 7885/3

RIVETS, BLIND, STRUCTURAL 100 DEG. FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED ALLOY STEEL SPINDLE (TYPE I, STYLE A, CLASS 2)

DLA MIL-R- 7885/5

RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD, NICKEL- COPPER ALLOY SLEEVE, MECHANICALLY LOCKED 15-7PH CRES SPINDLE (TYPE I, STYLE A, CLASS 2)

DLA MIL-R- 7885/7

RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 2)

DLA MIL-R- 8791

RETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, (SINGLE TURN)

DLA MIL-R- 8791/1

RETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, (SINGLE TURN)

DLA MIL-R- 9299

RESIN, PHENOLIC, LAMINATING

DLA MIL-S- 10699

SALTS, HEAT-TREATING (FOR METALS)

DLA MIL-S- 11310

STEEL BARS, CARBON, HOT ROLLED, FOR COLD SHAPING, INCLUDING COLD EXTRUSION

DLA MIL-S- 12875

SHEET, PERFORATED, METAL

DLA MIL-S- 13572

SPRINGS, HELICAL, COMPRESSION AND EXTENSION

DLA MIL-S- 21472

SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD, GENERAL SPECIFICATION FOR

DLA MIL-S- 24149/6

STUDS, WELDING, TYPE VIII, CLASS 1, 2, 3, CORROSION- RESISTANT STEEL FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING

DLA MIL-S- 46850

STEEL: BAR, PLATE, SHEET, STRIP, FORGINGS, AND EXTRUSIONS, 18 PERCENT NICKEL ALLOY, MARAGING, 200 KSI, 250 KSI, 300 KSI, AND 350 KSI, HIGH QUALITY

DLA MIL-S- 6049

STEEL, CHROME-NICKEL-MOLYBDENUM (8740) BARS AND REFORGING STOCK (AIRCRAFT QUALITY)

DLA MIL-S- 6050

STEEL, CHROME-NICKEL-MOLYBDENUM (8630) BARS AND REFORGING STOCK (AIRCRAFT QUALITY)

DLA MIL-S- 63540

STUD, SELF-CLINCHING, GENERAL SPECIFICATION FOR

DLA MIL-S- 63540/1

STUD, SELF-LOCKING, FLUSH HEAD, RIBBED CLINCH TYPE

DLA MIL-S- 63540/3

STUD, SELF-CLINCHING, FLUSH HEAD, HEX CLINCH TYPE

DLA MIL-S- 6709

STEEL, CHROME-MOLYBDENUM-ALUMINUM; BARS, RODS, BILLETS AND FORGING STOCK (FOR NITRIDING) (AIRCRAFT QUALITY)

DLA MIL-S- 7393

STEEL ALLOY CARBURIZING, BARS AND BILLETS, STEEL NICKEL- CHROMIUM (3310, 3316 AND 9310), AIRCRAFT QUALITY

DLA MIL-S- 7420

STEEL BARS, ALLOY, CHROMIUM, HIGH CARBON E52100 (AIRCRAFT QUALITY)

DLA MIL-S- 7839

SCREWS, STRUCTURAL, AIRCRAFT

DLA MIL-S- 7947

STEEL, SHEET AND STRIP (1095) (AIRCRAFT QUALITY)

DLA MIL-S- 7952

STEEL, SHEET AND STRIP, UNCOATED, CARBON (1020 AND 1025) (AIRCRAFT QUALITY)

DLA MIL-S- 82496

SCREWS, MACHINE, SELF SEALING, INTEGRAL O-RING

DLA MIL-S- 85069/1

SLEEVES, FASTENER, GROOVED, RELIABILITY AND MAINTAINABILITY (REPAIR AND MAINTAINACE) REQUIREMENTS FOR

DLA MIL-S- 955

SHOWER HEADS AND OUTFITS (SHIPBOARD USE)

DLA MIL-STD- 1220

ALCOHOLS AND AMINES, TECHNICAL GRADE

DLA MIL-STD- 190

IDENTIFICATION MARKING OF RUBBER PRODUCTS

DLA MIL-STD- 3004

QUALITY SURVEILLANCE FOR FUELS, LUBRICANTS, AND RELATED PRODUCTS

DLA MIL-STD- 40007

RIVETS, SOLID, INSTALLATION OF

DLA MIL-STD- 417

CLASSIFICATION SYSTEM AND TESTS FOR SOLID ELASTOMERIC MATERIALS

DLA MIL-STD- 670

CLASSIFICATION SYSTEM AND TESTS FOR CELLULAR ELASTOMERIC MATERIALS

DLA MIL-T- 43435

TAPE, LACING AND TYING

DLA MIL-T- 47287

TUBE, SPIRAL WRAP, POLYTETRAFLUOROETHYLENE AND POLYAMIDE

DLA MIL-T- 83507

TOOL KITS, ELECTRICAL CONNECTORS, CONTACTS, AND CONNECTOR AND CABLE ACCESSORIES: GENERAL SPECIFICATION FOR

DLA MIL-T- 87128

THREAD, PARA-ARAMIND, INTERMEDIATE MODULUS

DLA MIL-W- 12133

WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR

DLA MIL-W- 12133/1

WASHER, SPRING TENSION, BELLEVILLE SPRING, SPRING STEEL

DLA MIL-W- 12133/2

WASHER, SPRING TENSION, BELLEVILLE SPRING, CORROSION RESISTANT STEEL

DLA MIL-W- 12133/3

WASHER, SPRING TENSION, WAVE, COPPER-BERYLLIUM

DLA MIL-W- 12133/5

WASHER, SPRING TENSION, CURVED, SPRING STEEL

DLA MIL-W- 12133/6

WASHER, SPRING TENSION, WAVE, SPRING STEEL

DLA MIL-W- 25361

WEBBING, TEXTILE, POLYESTER, LOW ELONGATION

DLA MIL-W- 5521

WASHER, AIRCRAFT HYDRAULIC PACKING BACK-UP

DLA MIL-W- 6712

WIRE, METALLIZING

DLA MIL-W- 70342

WASHER, FLAT, METRIC, GENERAL SPECIFICATION FOR

DLA MIL-W- 70342/2

WASHER, FLAT, REGULAR SERIES (TYPE I), CRES, METRIC

DLA MIL-W- 70342/4

WASHER, FLAT, WIDE SERIES (TYPE III), HIGH STRENGTH, ALLOY STEEL, METRIC

DLA MM-L- 751

LUMBER, SOFTWOOD

DLA MS122026

WASHER - LOCK, SPRING

DLA MS122076

INSERT, CRES HELICAL COIL COARSE THREAD, 1 DIA, NOMINAL LENGTH

DLA MS122116

INSERT, CRES HELICAL COIL COARSE THREAD, 1-1/2 DIA NOMINAL LENGTH

DLA MS122156

INSERT, CRES HELICAL COIL COARSE THREAD, 2 DIA. NOMINAL LENGTH

DLA MS122196

INSERT, CRES HELICAL COIL COARSE THREAD, 2-1/2 DIA NOMINAL LENGTH

DLA MS122236

INSERT-CRES HELICAL COIL COARSE THREAD 3 DIAMETER NOMINAL LENGTH

DLA MS122900

CLAMP LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE

DLA MS124651

INSERT, CRES HELICAL, COIL FINE THREAD 1 DIA. NOMINAL LENGTH

DLA MS124691

INSERT, CRES HELICAL COIL FINE THREAD, 1-1/2 DIA NOMINAL LENGTH

DLA MS124731

INSERT, CRES HELICAL, COIL FINE THREAD 2 DIA. NOMINAL LENGTH

DLA MS124771

INSERT, CRES HELICAL COIL FINE THREAD 2-1/2 DIAMETER NOMINAL LENGTH

DLA MS124811

INSERT, CRES HELICAL COIL FINE THREAD, 3 DIA NOMINAL LENGTH

DLA MS14144

NUT, SELF-LOCKING, LIGHTWEIGHT, CASTELLATED, 450 DEG. F

DLA MS14145

NUT, SELF-LOCKING, LIGHTWEIGHT, THIN, CASTELLATED, 450 DEG. F

DLA MS14146

NUT, SELF-LOCKING, CASTELLATED, HEXAGON, C'BORED, CAPTIVE WASHER, 450 DEG. F

DLA MS14151

WASHER, FLAT, ROUND, CORROSION RESISTING STEEL (FOR ELECTRICAL APPLICATIONS)

DLA MS14155

WASHER, RECESSED, COUNTERSUNK, TWO SURFACES, FOR USE WITH WHEEL BOLTS AND NUTS UP TO AND INCLUDING 180 KSI FTU

DLA MS14156

NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 180 KSI FTU, 450 DEG. F, SPLINE DRIVE

DLA MS14157

BOLT, WHEEL, TENSION, FLANGED STEEL 180 KSI FTU, 450 DEG. F, EXTERNAL SPLINE DRIVE

DLA MS14163

BOLT, TENSION, STEEL, 220 KSI FTU, 450 DEG. F, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD

DLA MS14179

NUT, PLATE, SELF-LOCKING, FLOATING, TWO LUG, REDUCED RIVET SPACING STEEL, (POLYAMIDE INSERT) 500 CYCLES REUSE REPLACEABLE NUT, 160 KSI FTU, 450 DEG. F

DLA MS14180

NUT REPLACEMENT FOR SELF LOCKING PLATE, FLOATING, TWO LUG, STEEL, (VESPEL INSERT) 500 CYCLES REUSE 160 KSI FTU, 450 DEG. F

DLA MS14181

BOLT, TENSION, NICKEL ALLOY 718, 220 KSI FTU EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD

DLA MS14182

NUT, SELF-LOCKING, EXTENDED WASHER, ROUND NICKEL ALLOY 718, 220 KSI FTU, 450 DEG. F AND 800 DEG. F, SPLINE DRIVE

DLA MS14183

WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUDING 220 KSI FTU

DLA MS14188

SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS

DLA MS14198

LOCK, ROD END, EXTRA STRENGTH, HIGH PROFILE LUG

DLA MS14199

NUT ASSEMBLY, FLOATING, SELF-LOCKING, RIVETLESS, ATTACHED RETENTION ELEMENT, (A.R.E.), MAINTAINABILITY AND RELIABILITY DESIGN AND USAGE LIMITATIONS FOR

DLA MS14200

NUT, FLOATING, SELF-LOCKING, ATTACHED RETENTION ELEMENT (A.R.E.) 450 DEG. F STEEL, 125 KSI FTU, REPLACEABLE NUT ELEMENT

DLA MS14210

NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A. R. E.), 450 DEG. F, CRES (A-286), 125 KSI FTU, REPLACEABLE NUT ELEMENT

DLA MS14218

RIVET, SOLID, 120 DEG. FLUSH INTERFERENCE SHEAR HEAD

DLA MS14219

RIVET, SOLID, 120 DEG. FLUSH INTERFERENCE, TENSION TYPE HEAD

DLA MS14226

WASHER, FLAT, FOR OVERSIZE FASTENERS & FASTENER SLEEVE

DLA MS14303

PIPE FITTINGS, STEEL, THREADED, PRESSURE CLASS 2000, 3000, AND 6000 POUND WOG

DLA MS14304

COUPLING, CAPS, PLUGS, & BUSHINGS, PIPE THREADED, PRESSURE CLASS 3000 & 6000

DLA MS14305

FITTINGS, PIPE, BRASS OR BRONZE, THREADED (TEES, CROSSES, 45-DEG. ELBOWS, AND COUPLINGS), CLASS 125

DLA MS14310

CAPS, PIPE, BRASS OR BRONZE, THREADED, CLASS 125

DLA MS14311

FITTINGS, PIPE, BRASS OR BRONZE, THREADED (90-DEG. ELBOWS, TEES, CROSSES, 45-DEG. ELBOWS, AND COUPLING), CLASS 250

DLA MS14314

PLUGS, PIPE, BRASS OR BRONZE, THREADED (SQUARE HEAD AND SQUARE SOCKET), CLASSES 250 AND 125

DLA MS14315

BUSHINGS, PIPE, BRASS OR BRONZE, THREADED (OUTSIDE HEAD, INSIDE HEAD, AND FACE), CLASSES 250 AND 125

DLA MS14531

PIN, QUICK RELEASE WITH WARNING STREAMER ASSEMBLY

DLA MS15000

FITTINGS, LUBRICATION, HYDRAULIC, ACCEPTABLE TIP DESIGNS

DLA MS15001

FITTINGS, LUBRICATION (HYDRAULIC) SURFACE CHECK, 1/4-28 TAPER THREADS, STEEL, TYPE I

DLA MS15002

FITTINGS, LUBRICATION (HYDRAULIC) SURFACE CHECK, STRAIGHT THREADS, STEEL, TYPE II

DLA MS15003

FITTINGS, LUBRICATION (HYDRAULIC) SURFACE CHECK, 1/8 PIPE THREADS, STEEL, TYPE III

DLA MS15004

FITTINGS, LUBRICATION (HYDRAULIC) SURFACE CHECK, 1/4-28 TAPER THREADS, NICKEL-COPPER ALLOY, TYPE IV

DLA MS15005

FITTINGS, LUBRICATION, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, NICKEL-COPPER ALLOY, TYPE V

DLA MS15006

FITTINGS, LUBRICATION (HYDRAULIC) LEAKPROOF, 1/8 PIPE THREADS, STEEL, TYPE VI

DLA MS15720

FITTINGS, LUBRICATION (HYDRAULIC) THROAT OR SURFACE CHECK, 1/4-28 TAPER THREADS, CORROSION RESISTANT STEEL, TYPE VII

DLA MS15795

WASHER, FLAT-METAL, ROUND GENERAL PURPOSE

DLA MS15983

NUT, PLAIN, PLATE, NON-COUNTERSUNK

DLA MS16187

STUD, CONTINUOUS THREAD - (BOLT-STUD), B16 ALLOY STEEL, HIGH TEMPERATURE SERVICE (875 DEG - 1000 DEG F)

DLA MS16203

NUT, PLAIN, HEXAGON, AND HEXAGON JAM, UNC-2B, NONMAGNETIC

DLA MS16208

BOLTS, MACHINE, HEXAGON HEAD, SEMIFINISHED CORROSION RESISTING STEEL, UNC-2A, NONMAGNETIC

DLA MS16212

WASHERS, FLAT, METAL, ROUND, MEDIUM SERIES, NONMAGNETIC

DLA MS16213

WASHER, LOCK, FLAT, EXTERNAL TOOTH, NONMAGNETIC

DLA MS16219

SCREWS, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, NONMAGNETIC, CORROSION RESISTING STEEL, PASSIVATED, UNC-2A