11 MIL-P-8059

PLASTIC MATERIAL, LAMINATED, THERMOSETTING, SHEETS AND TUBES, ASBESTOS BASE, PHENOLIC RESIN

AS MIL-P-85315

PUMP, EJECTOR, AIR VEHICLE FUEL, GENERAL SPECIFICATION FOR

AS MIL-P-85856/24

POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS TUNGSTEN CARBIDE-COBALT, TYPE I, CLASS 1, COMPOSITION AA

SH MIL-P-876

PIPE INSULATION, CORK (FIRE RESISTANT VAPOR-BARRIER COATINGS)

99 MIL-P-87988/24

PIN-RIVET, THREADED, TYPE V (100 DEG. FLUSH MS24694 TENSION HEAD), CLASS 6 (PH13-8 MO CORROSION RESISTANT STEEL, 125 KSI FSU & 220 KSI FTU)

AT MIL-PRF-62284

BLOWER ASSEMBLY, AIR CLEANER

AT MIL-PRF-62494

SHOCK ABSORBER, DIRECT ACTING

GS MIL-PRF-7907

CLEANING COMPOUND, DECONTAMINATING (FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES)

71 MIL-PRF-9439

VALVES, OXYGEN CYLINDER, HIGH PRESSURE

12 MIL-R-5149

ROCKET ENGINE, LIQUID PROPELLANT, GENERAL SPECIFICATION FOR

AS MIL-R-8633

REMOVER, PAINT, NONFLAMMABLE, WATER RINSABLE

99 MIL-R-9917

RIVETER, PNEUMATIC, PIN SWAGED FASTENER, BLIND RIVETS AND BLIND BOLTS

SH MIL-S-16059

SHAFTING, FLEXIBLE (CORE AND CASING COMPLETE) (FOR THE REMOTE OPERATION OF VALVES)

SH MIL-S-16410

STEEL, SPRING, BARS AND WIRE

AS MIL-S-19557/1

STARTER, AIRCRAFT ENGINE, AIR TURBINE, MODEL A-14-1

AS MIL-S-19557/11

STARTER, AIRCRAFT ENGINE, AIR TURBINE, MODEL A-31

SH MIL-S-20154

STEEL, PLATE, SPECIAL-TREATMENT, FOR PROTECTIVE HULL PLATING

AS MIL-S-21568

SILICONE FLUID, DIMETHYL POLYSILOXANE

AS MIL-S-22518

STARTER, AIR TURBINE, ACCESSORY DRIVE COMBINATION, AIRCRAFT ENGINE, GENERAL SPECIFICATION FOR

SH MIL-S-22958

STEEL, ALLOY, SHAPES, HOT-ROLLED STRUCTURAL (HY-80 AND HY-100)

SH MIL-S-24240

SCREW, COLLAR, 12-POINT, EXTERNAL WRENCHING GENERAL SPECIFICATION FOR

IS MIL-S-43770

SNAP HOOKS, GENERAL SPECIFICATION FOR

IS MIL-S-43770/1

SNAP HOOKS, WIRE BODY, FIXED LOOP EYE, FLAT SPRING CLOSURE WITH RETAINER

MR MIL-S-46188

STEEL PLATE, WROUGHT, HOMOGENEOUS ELECTROSLAG REMELT (ESR) (4340 ALLOY)

AT MIL-S-464

SPREADER, AGGREGATE, TOWED-TYPE, TRACTION-POWERED

AS MIL-S-7126

SEALING COMPOUNDS, SYNTHETIC GLASS

11 MIL-S-83030

STEEL ALLOY CARBURIZING, BARS AND BILLETS, STEEL NICKEL-CHROMIUM (3310, 3316, AND 9310), PREMIUM QUALITY

SH MIL-S-872

STEEL BARS, BILLETS, AND FORGINGS-CARBON-MOLYBDENUM ALLOY

IS MIL-S-980

STEEL, CHROMIUM ALLOY, BARS (FOR TORPEDO GYROSCOPE BEARINGS)

CR4 MIL-STD-1408

AIR CONDITIONERS, STANDARD FAMILY OF MILITARY AIR CONDITIONERS, GENERAL APPLICATION CHARACTERISTICS

AV MIL-STD-616

EXTINGUISHERS, FIRE, --MONOBROMOTRIFLUOROMETHANE, --PORTABLE, HAND AND WHEELED TYPES, CAPACITIES AND CYLINDER DIMENSIONS

SA MIL-T-17491

TRUCKS, HAND, LIFT, PALLET, MANUAL - HYDRAULIC FOR SHIPBOARD USE (6,000 POUND CAPACITY)

AR MIL-T-52914

TOOL OUTFIT, HYDRAULIC SYSTEMS TEST AND REPAIR, MOBILE

AT MIL-T-52951

TRUCK, CONTAINER HANDLER, WITH TOP LIFT ATTACHMENTS, DIESEL ENGINE DRIVEN, PNEUMATIC TIRED, FOUR WHEEL DRIVEN, ARTICULATED FRAME STEER, ROUGH TERRAIN; 50,000 POUND CAPACITY AT 48 INCH LOAD CENTER

CC MIL-T-6945

TUBING, BRASS, SEAMLESS

CT MIL-T-83193

THREAD, ARAMID, SPUN STAPLE

99 MIL-T-9026

TABLE, GYRO INSTRUMENT TESTING, TYPE MA-1

SH MIL-U-17293

UNIT HEATER, AIR-CIRCULATING, STEAM (SHIPBOARD USE)

SH MIL-V-22682

VALVES, ASTERN (FOR SHIPBOARD USE)

11 MIL-V-38003

VALVES, FUEL LEVEL CONTROL, FUEL TANK, AIRCRAFT GENERAL SPECIFICATION FOR

AT MIL-V-62358

VALVE, SOLENOID

AS MIL-V-8612

VALVE; HIGH PRESSURE OXYGEN LINE

AS MIL-V-8712

VALVE, AIR RELIEF, LOW PRESSURE

AV MIL-W-13518

WOOD PRESERVATIVE: TETRACHLOROPHENOL AND PENTACHLOROPHENOL, SURFACE SEALING COMPOUND

SH MIL-W-17929

WHEEL, ABRASIVE, PRECISION

SH MIL-W-19460

WIRE ROPE ASSEMBLIES, SINGLE LEG, GRAPNEL AND BUOY TYPE

AS MIL-W-5693

WIRE STRAND, STEEL (CORROSION RESISTANT) PREFORMED (AIRCRAFT APPLICATIONS)

OS MIL-W-81244

WETTING AGENT

EA MMM-A-182

ADHESIVE, RUBBER

IS MS14267

BAR, SQUARE, ALUMINUM ALLOY 6061

CC MS14312

ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEG., REDUCING, CLASS 250

IS MS14353

PLATE, ALUMINUM ALLOY 7075

IS MS14363

CHANNEL, STYLE I ALUMINUM ALLOY 2024

IS MS14379

H-BEAM, WIDE FLANGE, ALUMINUM ALLOY 6061

IS MS14425

BAR, METAL, FLAT, CORROSION RESISTANT, TYPE 304

IS MS14470

ANGLE, STRUCTURAL, CORROSION RESISTANT, TYPE 304

IS MS16216

SCREWS, WOOD, SLOTTED ROUND HEAD, COPPER-SILICON ALLOY, NONMAGNETIC

AS MS18075

NIPPLE, SWIVEL FLANGE, HOSE FITTING AMS 5639 CRES STEEL

SH MS18285

FLEXIBILITY AND STRESS INTENSIFICATION FACTORS

AS MS21939

BOLT, CLUSTER FITTING, SINGLE PORT, THROUGH, FLARELESS

99 MS21951

BOLT-CLUSTER, FITTING DOUBLE PORT-FLARE

11 MS24229

KNOB-CONTROL, PLASTIC (ILLUMINATED)

OS MS26534

CHAIN, ROLLER, AIRCRAFT

AT MS27023

COUPLING HALF, QUICK DISCONNECT, CAM-LOCKING TYPE, MALE, FLANGED, TYPE IV

CC MS27231

STRAIGHT FLANGE NIPPLE ASSEMBLY, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES

AR MS27966

HINGE, BUTT-NARROW, NON-TEMPLATE

IS MS27969

HASP, HINGED, OPEN WITH FIXED STAPLE, STEEL

AS MS28914

BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW, AIRFRAME, ANTI-FRICTION, SEALED, TYPE III

IS MS29524

GASKET - ADAPTER LOCKING FLANGE, PRESSURE FUEL SERVICING

AS MS3334

FLANGE-ACCESSORY, 10.000 BC ROUND, DESIGN STANDARD FOR

AS MS33743

HOLES, CONTROL KNOB SHAFT

IS MS35679

PIN, GROOVED, HEADLESS - LONGITUDINAL CENTER GROOVE, BRASS

CC MS35759

CUPS, GREASE, AUTOMATIC FEED

CC MS39231

ELBOW, PIPE STREET, 45 DEG., (150 & 300 POUNDS)

IS MS500103

BAR, METAL, FLAT, STEEL, CARBON, 1020

AT MS51001

SEAL, PLAIN OR SEAL, PLAIN ENCASED: NON-SPRING LOADED, SINGLE SEALING MEMBER

IS MS51109

SCREW, CAP, HEXAGON HEAD, (FINISHED HEXAGON BOLT), SHANK DRILLED FOR COTTER PIN, STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A

IS MS51401

RIVET, SOLID, TINNERS

IS MS51486

SCREW, TAPPING, THREAD FORMING, TYPE AB, PAN HEAD, CROSS-RECESSED

CC MS51514

TEE, PIPE TO TUBE, FEMALE PIPE ON RUN, 37 DEGREE FLARED

CC MS51821

TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC

CC MS51888

LOCKNUT, ADJUSTABLE, 37 DEGREE FLARED AND FLARELESS TYPE, HYDRAULIC

IS MS51927

BUCKLE, TONGUELESS, I-BAR

IS MS52043

SHEET, METAL, LOW CARBON STEEL, (1015) COLD ROLLED AND HOT ROLLED

GS4 MS52142

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE

AT MS53052

BRACKET ASSEMBLY, LIQUID CONTAINER, FIVE GALLON

IS MS53069

NUT, PLAIN, ASSEMBLED WASHER: 7/16 INCH (FLOATING TYPE)

AT MS70100

COUPLING HALF, QUICK DISCONNECT, CAM-LOCKING TYPE, NIPPLE ADAPTER, MALE BY EXTERNAL GROOVED PIPE, TYPE XIX

CC MS8002

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE

IS MS90133

GASKETS, V-GROOVE; PART OF RF COAXIAL CONNECTORS

IS MS90513

SHEET, METAL, ALUMINUM ALLOY 6061

AS MS9064

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION & HEAT RESISTANT STEEL, DRILLED, .4375-20 NS

AS MS9065

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION & HEAT RESISTANT STEEL, DRILLED, .500-20 NS

IS MS9137

GASKET-TYPE XIII ENGINE ACCESSORY DRIVE

AS MS9159

BOLT MACHINE, STEEL, 12 POINT HEAD, .3125-24, BLACK OXIDE

AS MS9190

BOLT-MACHINE, STEEL, 12 POINT HEAD .164 (NO. 8)-36, BLACK OXIDE

IS MS9223

BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED, .5625-18 UNJF-3A

IS MS9289

BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .5625-18 UNJF-3A

IS MS9300

BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE, HEXAGON HEAD, .5625-18 UNJF-3A

IS MS9304

STUD, SHOULDERED AND STEPPED, HEXAGON WRENCHING, STEEL, .190-32 NF-3A X .250-28 UNF-3A

IS MS9306

STUD, SHOULDERED AND STEPPED, HEXAGON WRENCHING, STEEL, .250-28 UNF-3A X .3125-24 UNF-3A

IS MS9307

STUD, SHOULDERED & STEPPED, HEXAGON WRENCHING, STEEL, .250-28 UNF-3A X .375-24 UNF-3A

99 MS9355

PACKING, PREFORMED, 'O' RING

AS MS9367

BRACKET-FLAT, CRES AMS 5510, .250 BOLT

IS MS9399

BOLT, TEE HEAD-AMS 6322, CHAMFERED, .3125-24 UNJF-3A, CADMIUM PLATE

IS MS9516

SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, HEXAGON HEAD, .138-40 UNJF-3A

IS MS9527

SCREW, MACHINE STEEL AMS6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .138-40 UNJF-3A

IS MS9534

BOLT, MACHINE-STEEL, AMS6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .500-20 UNJF-3A

IS MS9589

BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .5625-18 UNJF-3A

AS MS9634

BOLT, MACHINED-HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967, .250-28 UNJF-3A

IS MS9681

BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, CUP WASHER LOCKED, .250-28 UNJF-3A

AS MS9682

BOLT, MACHINE-STEEL AMS 6322, CADMIUM PLATED, DOUBLE HEXAGON, EXTENDED WASHER HEAD, CUPWASHER LOCKED, .3125-24 UNJF-3A

AS MS9722

SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .164-36 UNJF-3A

AS MS9730

SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS 5643, .138-40 UNJF-3A

IS MS9742

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES AMS 5643, .250-28 UNJF-3A

AS MS9819

BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, AMS 5643, .375-24 UNJF-3A

IS MS9944

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .375-24 UNJF-3A

AS MS9957

BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS 6322, CADMIUM PLATED, .190-32 UNJF-3A

AV O-A-548

ANTIFREEZE/COOLANT, ENGINE: ETHYLENE GLYCOL, INHIBITED, CONCENTRATED

GS O-D-1271

DIETHYLENETRIAMINE, TECHNICAL

GS3 O-D-1435

SANITIZER, PHENOLIC TYPE, CONCENTRATE

GS3 P-C-111

CARBON REMOVING COMPOUND

SH QPL-15508

VALVES, REMOTE CONTROL, DIAPHRAGM ACTUATED (FLUID SYSTEMS, 150 AND 250 P.S.I. W.P. 140 DEG. F MAXIMUM)

SH QPL-18160

HOSE ASSEMBLIES, CORRUGATED STEEL, 200 PSI AND 425 DEGREES F. MAXIMUM STEAM SERVICE RATING

SH QPL-20627

FILTER ASSEMBLY AND FILTER ELEMENTS, FLUID, PRESSURE (FOR ENGINES WITH LIQUID FUEL INJECTION SYSTEMS)

IS QPL-23964

BOLT, SELF-RETAINING, POSITIVE LOCK

SH QPL-24648

PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC)

SH QPL-24695

VALVE, HOSE ASSEMBLY, AND ADAPTER, VENT AND TEST HYDRAULIC SERVICE, GENERAL SPECIFICATION FOR (METRIC)

99 QPL-27656

FILTER UNIT, FLUID, PRESSURE MXU-408/M ABSOLUTE 5 MICRON, HYDRAULIC

SH QPL-3117

HEATERS, CONVECTION, STEAM AND HOT WATER

SH QPL-3134

DECK COVERING MATERIALS

99 QPL-4109

COUPLING ASSEMBLY, AIR HOSE, QUICK - OPERATING

AS QPL-5410

CLEANING COMPOUND, ALUMINUM SURFACE, NON-FLAME-SUSTAINING

AS QPL-8073

CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED GLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL APPLICATIONS

AS QPL-81356

VALVE, FUEL SYSTEM PRESSURIZATION AND VENT

11 QPL-83411

DEICER/ANTI-ICER FLUID (FOR RUNWAYS AND TAXIWAYS)

AS QPL-AMS-C-22542

CLEANING COMPOUND, HIGH PRESSURE CLEANER, LIQUID

AV QPL-VV-B-680

BRAKE FLUID, AUTOMOTIVE

AT QPL-ZZ-V-25

VALVES, AND VALVE SPUDS, CAPS, AND CORES, PNEUMATIC TIRE

GS QQ-R-571

RODS, WELDING, COPPER AND NICKEL ALLOYS

MR QQ-W-390/1

WIRE NONELECTRICAL, ROUND, NICKEL-CHROMIUM-IRON ALLOY

AS TT-B-846

BUTYL ALCOHOL, NORMAL (BUTANOL) (FOR USE IN ORGANIC COATINGS)

FSS TT-L-54

LACQUER: SPRAYING, ACID-RESISTANT, (FOR ALUMINUM SURFACES AROUND STORAGE BATTERIES)

FSS TT-P-26

PAINT, INTERIOR, WHITE, TINTS AND BLACK, FIRE RETARDANT

GL TT-P-595

PRESERVATIVE COATING, CANVAS

FSS TT-V-121

VARNISH, SPAR, WATER-RESISTING

YD WW-P-541/7

PLUMBING FIXTURES (SHOWER BATH AND EMERGENCY EYE AND FACE WASH OUTFITS) (DETAIL SPECIFICATION)

SH ZZ-R-710

RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS

GS ZZ-R-765/10

RUBBER, SILICONE; ROUND SECTION

GS ZZ-R-765/16

RUBBER, SILICONE; RUBBER STRIP

GS ZZ-R-765/5

RUBBER, SILICONE; CHANNEL, NONMETALLIC

FSS A-A-1038

SEAL, ANTIPILFERAGE (SELF-LOCKING)

FSS A-A-1344

WRENCH, BOX, DOUBLE OFFSET EACH END (DEEP OR MODIFIED), REGULAR LENGTH

FSS A-A-1407

SOCKET, SOCKET WRENCH, NONPOWER, 1/4 INCH DRIVE, 12-POINT, REGULAR LENGTH

FSS A-A-2131

HOSE ASSEMBLY, NON-METALLIC (FIRE, 600 LBS. TEST PRESSURE)

FSS A-A-2232

TAPE, PRESSURE SENSITIVE ADHESIVE (DUCT)

FSS A-A-2318

FILE, HAND (AMERICAN PATTERN), KNIFE

FSS A-A-2493

WRENCH, BOX AND OPEN END (NONSPARKING AND NONMAGNETIC)

FSS A-A-2496

WRENCH, SPANNER (NONSPARKING AND NONMAGNETIC)

FSS A-A-2711

SCREWDRIVER CROSS TIP (HIGH PERFORMANCE)

FSS A-A-2927

SCREWDRIVER HANDLE AND HEXAGON BIT, NONREPLACEABLE, ADJUSTABLE BIT

FSS A-A-3052

ADHESIVE, UREA RESIN TYPE (LIQUID AND POWDER)

FSS A-A-307

PICK, DRIFTING (WITHOUT HANDLE)

FSS A-A-3099

HAMMER, CARPENTERS', STRAIGHT CLAW

CE3 A-A-3130

PAINT (FOR APPLICATION TO WET SURFACES)

IS A-A-3135

WHEELBARROWS

FSS A-A-314

JACK KIT, HYDRAULIC, HAND (4 TON)

FSS A-A-3191

BRUSHES: ARTISTS

CC A-A-50461

NOZZLES; GARDEN HOSE (FOR 5/8 AND 3/4 INCH HOSE)

IS A-A-50543

HEATERS, CONVECTION, STEAM OR HOT WATER

YD A-A-50559

VALVES, TEMPERATURE-REGULATING (THERMOSTATICALLY CONTROLLED)

YD A-A-50561

PUMPS, ROTARY, POWER-DRIVEN, VISCOUS LIQUIDS

SH A-A-50605

EXPANSION JOINT, TFE FLUOROCARBON RESIN, CORRUGATED WITH DUCTILE IRON FLANGES

GS6 A-A-50782

WORK STATION, LAMINAR FLOW

GS6 A-A-50970

ARBORS, DRILL CHUCK, TAPER SHANK WITH TANG

GS A-A-51131

TOOL HOLDER, SHAPER EXTENSION

GS6 A-A-51137

TOOL HOLDERS, BORING TOOL AND BORING BAR, LATHE

GS6 A-A-51138

BRAZING AND SOLDERING SET (ACETYLENE GAS)

GS6 A-A-51146

FILES, ROTARY, CYLINDRICAL SHAPE, HIGH SPEED STEEL OR TUNGSTEN CARBIDE

GS6 A-A-51161

HOLDERS, ELECTRODE, SHIELDED METAL, ARC WELDING

FSS A-A-517

DRILL, TWIST, 1/4 INCH SHANK

GL A-A-52088

ROPE, COTTON, OR COTTON/POLYESTER BLEND

GL A-A-52123

BARS, BUCKING, RIVET

AT A-A-52151

BELT, SEAT, PASSENGER TYPE, AUTOMOTIVE, COMMERCIAL VEHICLES

AT A-A-52429

VALVE, SOLENOID OPERATED

AT A-A-52477

CABLE AND CONDUIT ASSEMBLY, PARKING BRAKE-LOOP TYPE, EYE END FITTING (METRIC)

AT A-A-52494

RUBBER STOCK, UNVULCANIZED: FOR TRACK SHOES, PADS, AND PIN BUSHINGS (METRIC)

AT A-A-52503

MIRROR AND BRACKET ASSEMBLY, REARVIEW

AT A-A-52509

HOOK, TOWING: LIGHT (FOR VEHICLES 7.26 TO 13.62 METRIC TONNES) (METRIC)

AT A-A-52515

POWDER, CHROMIUM CARBIDE-NICKEL CHROMIUM ALLOY (METRIC)

AT A-A-52524/2

SEAL, PLAIN ENCASED: DUAL SEAL, SPRING LOADED

MB A-A-53848

TUBING, NONMETALLIC (RUBBER)

FSS A-A-548

CLAMP, CANTILEVER JAW

CC A-A-55543

GUN, AIR BLOW, (BLAST CLEANING)

IS A-A-55614

SHIELD, EXPANSION (NON-DRILLING EXPANSION ANCHORS)

GS A-A-55766

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 22

GS A-A-55768

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 24

GS A-A-55778

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 34

GS A-A-55783

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 39

GS A-A-55785

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 41

GS A-A-55786

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 42

GS A-A-55788

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 44

GS A-A-55789

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 45

GS A-A-55791

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 47

GS A-A-55792

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 49 (SUPERSEDING ZZ-R-765/49)

GS A-A-55794

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 51

FSS A-A-568

CUTTER, GRINDER

84 A-A-58048

GUARD, SAFETY, TIRE INFLATION

84 A-A-58065

MOUNTER-DEMOUNTER, PNEUMATIC TIRE, STATIONARY

99 A-A-59110

LEAK DETECTOR, FUEL SYSTEM

GS6 A-A-59119

LAPPING MACHINES, METAL WORKING, HIGH-PRECISION, FLAT SURFACE

84 A-A-59240

COMPOSITE REPAIR SET, AIRCRAFT (DUAL ZONE, CLASS 1 DIV 2)

AR A-A-59254

ADHESIVE, ANIMAL GLUE, DRY FORM

84 A-A-59268

COMPOSITE REPAIR SET, AIRCRAFT (SINGLE ZONE)

CT A-A-59357

FASTENERS, BELT; CLIPS, ENDS WITH HOOK: AND KEEPERS, SLIDE

GS6 A-A-59368

SOLDERING/DESOLDERING, STATION

CC A-A-59435

HEATERS, GUN TYPE, ELECTRIC

CC A-A-59444

REDUCER COUPLING, TUBE, MALE TO FEMALE SOLDER-JOINT, REFRIGERATION

CC A-A-59449

COUPLING, TUBE, WITH STOP, SOLDER-JOINT, REFRIGERATION

GS6 A-A-59463

FURNACE, HEAT TREATING, ELECTRICAL CONTROLLED ATMOSPHERE, HORIZONTAL BOX DESIGN

CT A-A-59511

CLOTH, COATED OR CLOTH, LAMINATED, REFLECTIVE

GS4 A-A-59600

BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 23

GS4 A-A-59630

BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEG. THROUGH 32 DEG., DIMENSION SERIES 03

GS4 A-A-59633

BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEG. THROUGH 45 DEG., DIMENSION SERIES 02

GS4 A-A-59636

BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, DIMENSION SERIES 32

GS4 A-A-59648

BEARINGS, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, MEDIUM SERIES (MS - SERIES)

GS4 A-A-59652

BEARINGS, ROLLER, TAPERED, SINGLE ROW, STEEP ANGLE, FLANGED CUP (TYPE TSSF)

GS4 A-A-59653

BEARINGS, ROLLER, TAPERED, DOUBLE ROW, ONE DOUBLE CONE, TWO SINGLE CUPS (TYPES TDI AND TDIS)

GS4 A-A-59654

BEARINGS, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDO)

SH A-A-59758

SORBENT, OIL

AT A-A-59786

ADHESIVE, (STRUCTURAL ADHESIVE)

68 A-A-59787

POTASSIUM PERMANGANATE, TECHNICAL (METRIC)

FSS A-A-829

HERBICIDE, SIMAZINE

11 AF M91-223

AVIATION SAFETY INVESTIGATIONS AND REPORTS

IS AN106101

BOLT-CRES HEX HEAD, DRILLED SHANK, .5625-18

IS AN107001

BOLT - CRES DRILLED HEX HEAD, 1 HOLE, .5625-18 (INACTIVE AFTER 27 DEC 1966)

IS AN115451

SCREW AND FLAT FILLISTER HEAD, .250-28

IS AN115551

SCREW-FLAT FILLISTER HEAD, .375-24 (INACTIVE 10-26-72)

IS AN115601

SCREW-FLAT FILLISTER HEAD DRILLED SHANK, .190-32

IS AN127493

STUD-STRAIGHT, NECKED, .500-13 X .500-20

IS AN128999

STUD, STRAIGHT, DRILLED, .375-16 X .375-24

IS AN154401

STUD STEPPED, DRILLED, 1.5 DIA. ENGAGEMENT, .625-11 X .5625-18 (INACTIVE 10-26-72)

IS AN160401

STUD-STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20

IS AN165501

STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28

IS AN166401

STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20

71 AN6293

VALVE, 4-WAY ROTARY SELECTOR, 3,000 PSI, NON-INTERFLOW

99 AND10264

FLANGE-TYPE XIV ACCESSORY MOUNTING

99 AND20003

DRIVE-TYPE XIII ENGINE ACCESSORY

99 AND20007

DRIVE-TYPE XVII ENGINE ACCESSORY

99 AND20009

DRIVE-TYPE XIX ENGINE ACCESSORY

GS3 BB-C-104

CARBON DIOXIDE, TECHNICAL: SOLID

SH DOD-B-24668

BEARING UNIT, MAIN THRUST, SUBMARINE PROPULSION SYSTEM

IS DOD-B-63475/2

BOLT, SHOULDER, HEXAGON HEAD, SHORT THREAD, METRIC

OS DOD-C-82656

CARBON BLACK,THERMAL

IS DOD-N-63548/1

NUT, PLAIN, HEXAGON, CONE SEAT, WHEEL MOUNTING, METRIC

GS DOD-S-63544/1

SHIM, CRES, METRIC

IS DOD-W-63546/7

WASHER, KEY, INTERNAL, STEEL, METRIC

IS DS14242

CLAMP, LOOP, CUSHIONED, CENTER MOUNTING, METRIC

IS DS14489

CLAMP, LOOP, METAL, PLAIN, SUPPORT, AIRCRAFT, METRIC

IS DS51409

SETSCREW, SLOTTED HEADLESS, CONE POINT CARBON STEEL, CADMIUM PLATED, METRIC

GS FF-B-171/8

BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, FILLING SLOT, ANSI/AFBMA DIMENSION SERIES 03

IS FF-C-77

CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY)

FSS GGG-A-450

ALIGNMENT TOOL, ELECTRONIC EQUIPMENT

FSS GGG-C-748

CUTTER, CIRCLE (ADJUSTABLE); FOR GASKETS AND WASHERS

FSS GGG-D-296

DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE: AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS)

FSS GGG-F-360

FINGER, MECHANICAL, AND RETRIEVER TOOL, MAGNETIC

FSS GGG-P-643

PULLER KIT, MECHANICAL

FSS GGG-T-558

TOOL BOXES

FSS GGG-W-00649

WRENCH, PLIER; CLAMP, PLIER; AND PLIER, TUBING PINCH-OFF

FSS HH-I-538

INSULATION, ELECTRICAL, PASTED-MICA

GS JJJ-A-20

ACACIA, TECHNICAL (GUM ARABIC)

FSS KKK-T-00728

TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY

CT KK-L-254

LEATHER, SHEEPSKIN, CHROME TANNED

CT K-P-146

TARPAULINS, COTTON DUCK, FWWMR

EA MIL-A-13550

ANTIFOGGING KIT, M1

SH MIL-A-24058

ASBESTOS PACKING & GASKETING MATERIAL, IMPREGNATED

AR MIL-A-3029

ASPHALT, WATERPROOFING (FOR USE IN MANUFACTURE OF FIBER AMMUNITION CONTAINERS)

AT MIL-A-516

AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN

OS MIL-A-82654

ALUMINUM POWDER, ATOMIZED, TECHNICAL

OS MIL-A-82842

ADHESIVE, CONDUCTIVE, LOW RESISTIVITY

GS MIL-B-12582

BLOCKS, TACKLE, HAUL BACK, FOR WIRE ROPE

OS MIL-B-21465

BUTYL STEARATE, NORMAL

IS MIL-B-85667/4

BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT SHANK, TITANIUM ALLOY PIN, 95 KSI FSU

EA MIL-C-13370

COATING MATERIAL, HEAT RESISTANT: FOR FERROUS SURFACES

AR MIL-C-14153

CLAMP, WHEEL CYLINDER, HYDRAULIC BRAKE

AS MIL-C-17183

CORD, NYLON, BRAIDED, TUBULAR, SPLICEABLE

SH MIL-C-17557

COOLERS, FLUID, INDUSTRIAL, NAVAL SHIPBOARD (SAMPLE WATER COOLERS)

SH MIL-C-17944

CAPSTANS, ELECTRIC (FOR SHIPBOARD USE)

SH MIL-C-24316

CYLINDER, COMPRESSED GAS, DIVER'S, FOR DEMAND OPEN CIRCUIT SCUBA

SH MIL-C-24757

CLOTH, FIBERGLASS, COATED

SH MIL-C-24769

CRANE, ROTATING SHIPBOARD

SH MIL-C-24774

CHAIN, STUD LINK, ANCHOR, FLASH BUTT WELDED, NONMAGNETIC

NU MIL-C-24931

CLOTH, PLAIN WEAVE, ARAMID, WATER REPELLENT

EC MIL-C-28876/19

CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, INSERTION TOOL

SH MIL-C-3486

COUPLINGS AND COUPLING HALVES-QUICK DISCONNECT, AIR HOSE, BOWES TYPE

GL MIL-C-3924

CLOTH, OXFORD, COTTON WARP AND NYLON FILLING, QUARPEL TREATED

GL MIL-C-44396

CLOTH, TWILL, PARA-ARAMID

MI MIL-C-47224

COMPOUND MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT

AV MIL-C-52545

COUPLINGS, HOSE: REUSABLE, HYDRAULIC, OIL SUCTION 2-BOLT CLAMP-ON, GENERAL SPECIFICATION FOR

AV MIL-C-52883

CLOTH, SCRIM, GLASS