SH MIL-S-19622/23

STUFFING TUBE, NYLON, SIZE 8: PACKING ASSEMBLIES FOR

SH MIL-S-2041

SINKS (NAVAL SHIPBOARD USE)

71 MIL-S-25980

SWITCH, FLOAT, AIRCRAFT FUEL LEVEL, GENERAL SPECIFICATION FOR

SH MIL-S-29180

SCAFFOLDING COMPONENTS, STEEL (PIPE, TUBE, AND COUPLER)

AT MIL-S-3785

STARTERS ENGINE, ELECTRICAL, 24-VOLT D.C.

71 MIL-S-38399

STARTER, PNEUMATIC, AIRCRAFT ENGINE, GENERAL SPECIFICATION

GL MIL-S-44197

SHELTER, TACTICAL, EXPANDABLE, ONE-SIDE

IS MIL-S-45909

STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR

MR MIL-S-46059

STEEL, CARBON AND ALLOY, EXTRUDED SHAPES

MI MIL-S-47265

SHEET, PERFORATED, ALUMINUM ALLOY

AS MIL-S-487

SULFUR, GROUND (FOR USE IN AMMUNITION)

AT MIL-S-52713

SPREADER, LIFTING, ISO & INTERMODAL FREIGHT CONTAINERS

GS3 MIL-S-612

STRONTIUM PEROXIDE

11 MIL-S-83474

SHIMS, MOLDED, FILLED RESIN COMPOUND AND SHEET PREPREG

AR MIL-STD-114

GAGE, PLUG, THREAD GO (CLASS X) FOR UNIFIED AMERICAN NATIONAL STANDARD INTERNAL THREADS

AS MIL-STD-1312 -15

FASTENER TEST METHODS METHOD 15, TORQUE TENSION

GS MIL-STD-1448

HYDROCARBON COMPOUNDS AND SOLVENT DISTILLATES, TECHNICAL GRADE

AS MIL-STD-1647

IDENTIFICATION MARKINGS FOR DOMESTICALLY MANUFACTURED BEARINGS, BALL, ANNULAR FOR INSTRUMENTS AND PRECISION COMPONENTS

AT MIL-STD-340

COATING, PACK CEMENTATION, CHROME ALUMINIDE, PROCESS FOR

GS MIL-STD-605

INORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE

GS MIL-STD-610

HALOGENATED HYDROCARBON COMPOUNDS AND SOLVENTS, TECHNICAL GRADE (METRIC)

CR MIL-T-10767

TOWERS (COMPONENTS OF)

AS MIL-T-21014/1

TUNGSTEN BASE PARTS, HIGH DENSITY METAL (SINTERED OR HOT PRESSED), COATED, ELECTRODEPOSITED CADMIUM

AS MIL-T-21014/3

TUNGSTEN BASE PARTS, HIGH DENSITY METAL (SINTERED OR HOT PRESSED), COATED, ELECTRODEPOSITED CHROMIUM

SH MIL-T-2118

TRAP, STEAM, ANGLE, THERMOSTATIC

IS MIL-T-25186

TOILET, AIRCRAFT, CHEMICAL

68 MIL-T-27602

TRICHLOROETHYLENE, OXYGEN PROPELLANT COMPATIBLE

GL MIL-T-3530

THREAD AND TWINE, MILDEW RESISTANT OR WATER REPELLENT TREATED

MR MIL-T-52234

TUBE, ALUMINUM ALLOY 5083 AND 5086, SQUARE, SEAMLESS, EXTRUDED OR DRAWN

AT MIL-T-52843

TRUCKS, LIFT, FORK, DIESEL-ENGINE-DRIVEN: PNEUMATIC-TIRED, ROUGH TERRAIN; 10,000 POUND CAPACITY AT 48-INCH LOAD CENTER

AS MIL-T-7840

TUBING, NICKEL-CHROMIUM-IRON ALLOY, SEAMLESS OR WELDED (FOR AIRCRAFT APPLICATIONS)

SH MIL-V-0081940/4

VALVE, SAMPLING AND BLEED, HYDRAULIC, 3,000 PSI NON-AIRCRAFT APPLICATIONS

SH MIL-V-17360

VALVES, CYLINDER, GAS, CARBON DIOXIDE FIRE EXTINGUISHER

71 MIL-V-25513

VALVE, CHECK, FOR 300 PSI LIQUID OXYGEN CONVERTER SYSTEMS, TYPE MH-1

CC MIL-V-6125

VALVE, REGULATING, FLUID PRESSURE, TYPE C-1

AR MIL-W-20553

WAX, DESENSITIZING

GL MIL-W-26497

WRENCH, TORQUE, SCREWDRIVER TYPE

AS MIL-W-81002

WIRE ROPE, STEEL, 1-3/8 INCH DIAMETER, 6 BY 30, TYPE G, LANG LAY FLATTENED STRAND, FIBER CORE, HIGH-STRENGTH (FOR AIRCRAFT ARRESTING)

FSS MMM-A-187

ADHESIVE, EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH, GENERAL PURPOSE

IS MS14297

BAR, METAL, HEXAGON, ALLOY STEEL 4130 CHROME MOLYBDENUM (AIRCRAFT QUALITY)

CC MS14307

ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEG., STREET, CLASS 125

IS MS14361

SHEET, ALUMINUM ALLOY 2024

IS MS14416

BAR, METAL, ROUND, CORROSION RESISTANT, TYPE 316L

IS MS14491

NUT, WHEEL, SELF-LOCKING, FLANGED, NICKEL ALLOY 718, 220 KSI FTU, 450 DEG. F, SPLINE DRIVE

AS MS17293

STUD-STEPPED, 1.5 DIA ENGAGEMENT, 0.250-20 X 0.190-32

IS MS21292

BOLT, MACHINE - STEEL, DRILLED, DOUBLE HEXAGON, EXTENDED WASHER, .4375-20 (MIL-S-8879 THREAD)

IS MS21312

HANDWHEEL-REVOLVING HANDLE, WITH KEYWAY

AS MS21942

BODY, CLUSTER FITTING, ONE WAY, FLARELESS

AS MS21957

COUPLING, QUICK-DISCONNECT, LOW PRESSURE AIR CONNECTION, BULKHEAD FITTING END, 1/4 TUBE SIZE (INACTIVE - 28 DECEMBER 1967)

CC MS21960

BODY, CLUSTER FITTING, THREE-WAY, INTERNAL BOSS

AS MS23003

GAGES - INSPECTION FOR MS23002 CRIMPING DIES (FOR USE WITH MS250036 INSULATED TERMINALS)

CC MS24529

CAP, LUBRICATION FITTING, PROTECTIVE

IS MS24633

SCREW, TAPPING-THREAD CUTTING, TYPES BF AND BT, APPROXIMATE HOLE SIZES FOR

IS MS24662

RIVET, BLIND - UNIVERSAL HEAD, DRIVE TYPE

AS MS25442

DIES, FOR MS25441, HYDRAULIC CRIMPING TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS)

CC MS27225

NIPPLE ASSEMBLY 45 DEG., ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES

CC MS27227

FLANGE NIPPLE ASSEMBLY 90°, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES

CC MS27236

SHOULDER - DESIGNED FOR 45° AND 90° SWIVEL NUT, HOSE TO TUBE ADAPTERS, REUSABLE, HYDRAULIC, FUEL AND OIL LINES

CC MS27391

NIPPLE, FLARELESS, TUBE TO HOSE-SWIVEL NUT

CC MS27619

NIPPLE SUB ASSEMBLY, FLARED, STRAIGHT-WITH SWIVEL NUT

CC MS27635

NIPPLE, FLARELESS, TUBE TO HOSE-SWIVEL NUT

IS MS27965

HASP, HINGED, SAFETY, WITH SWIVEL STAPLE, STEEL

IS MS27972

HINGE, STRAP

AS MS28744

FITTING END - HOSE, SWIVEL, DETACHABLE, FLANGED, 3 BOLT, 90 DEG.

AS MS28912

BEARING, ROLLER, SELF-ALIGNING, SINGLE ROW, AIRFRAME, ANTI-FRICTION, SEALED, TYPE I

AS MS29522

PLUG, HEXAGON HEAD, OIL COOLER

IS MS33749

SCREW - INSTALLATION AND LIMITATIONS FOR USAGE OF THREAD CUTTING AND THREAD FORMING

IS MS35792

HANDLE, BAIL CHEST, RECESSED

GS4 MS35794

BEARING, SLEEVE, STEEL-BACKED BIMETAL, SPLIT TYPE, ONE PIECE

AT MS35841

FILLER NECK: RADIATOR (7 PSI)

CC MS35923

REDUCER COUPLING, TUBE, FEMALE TO FEMALE SOLDER-JOINT, REFRIGERATION

CC MS39134

SPRING, HELICAL, COMPRESSION, AUTOMOTIVE AIR BRAKE HOSE ADAPTER

AR MS39162

ELBOW, PIPE TO TUBE, 90 DEG. MALE PIPE END, 45 DEG. FLARED TYPE, AUTOMOTIVE

CC MS39322

ADAPTER, 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4-INCH TO 1-INCH

IS MS51477

SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, UNF-3A

IS MS51478

SCREW, CAP, HEXAGON (FINISHED HEXAGON BOLT), HEAD DRILLED FOR LOCKING WIRE ALLOY STEEL, GRADE 8, UNF-2A

IS MS51605

PIN, GROOVED, HEADLESS (HALF LENGTH TAPER GROOVE) CORROSION RESISTING STEEL

IS MS51974

SETSCREW-HEXAGON SOCKET, CONE POINT, ALLOY STEEL, CADMIUM PLATED, UNF-3A PLAIN AND SELF-LOCKING

AT MS52129

CONNECTOR, RECEPTACLE, ELECTRICAL INTERVEHICLE POWER CABLE

IS MS63044

STRAP, RETAINING, RECTANGULAR, CUSHIONED

IS MS90504

PLATE, STEEL, CARBON, MEDIUM

AS MS9066

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, DRILLED, .5625-18 NS

CC MS90908

FILLER TUBE, FUEL TANK - MILITARY VEHICLES

AS MS9104

BRACKET, ANGLE, 90 DEG. .190 X .375 BOLT

IS MS9152

BOLT, MACHINE, STEEL, 12 POINT HEAD, .5625-18, CADMIUM PLATE

AS MS9157

BOLT-MACHINE, STEEL, 12 POINT HEAD, .190 (NO.10)-32, BLACK OXIDE

AS MS9183

SCREW, MACHINE, STEEL, DRILLED 12 POINT HEAD, .138 (NO.6)-40, CADMIUM PLATE (ASG)

AS MS9199

NUT, TUBE COUPLING-ALUMINUM, AMS 4121

IS MS9290

BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .624-18 UNJF-3A

AS MS9365

BRACKET-FLAT, CRES AMS 5510, .190 BOLT

IS MS9377

GASKET-ENGINE ACCESSORY DRIVE

IS MS9397

BOLT, TEE HEAD - AMS 6322, CHAMFERED, .190-32 UNJF-3A, CADMIUM PLATE (ASG)

IS MS9434

BOLT, TEE HEAD - AMS 5735, CHAMFERED, .3125-24 UNJF-3A (ASG)

IS MS9440

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .190-32 UNJF-3A

IS MS9521

BOLT, MACHINE, HEXAGONHEAD, STEEL CADMIUM PLATED, .375-24 UNJF -3A

IS MS9580

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .5625-18 UNJF-3A

AS MS9591

BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .750-16 UNJF-3A

AS MS9640

SCREW, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, TITANIUM AMS 4967, .138-40 UNJF-3A

IS MS9727

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A

AS MS9728

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .500-20 UNJF-3A

IS MS9785

BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .3125-24 UNJF-3A

AS MS9827

STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.250-20 UNJS X 0.190-32 UNJF

IS MS9933

BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .250-28 UNJF-3A

AS MS9941

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .190-32 UNJF-3A

GS O-A-451

AMMONIUM HYDROXIDE, TECHNICAL

SH O-D-1407

DRY CHEMICAL, FIRE EXTINGUISHING, POTASSIUM BICARBONATE

SH QPL-17869

PUMPS AND MOTORS, POWER, OIL HYDRAULIC (NAVAL SHIPBOARD USE)

SH QPL-19468

PLASTIC RODS, POLYTETRAFLUOROETHYLENE, MOLDED AND EXTRUDED

IS QPL-22978

FASTENER, ROTARY, QUICK-OPERATING, HIGH STRENGTH

SH QPL-24574

LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES

MC QPL-29475

COATING, WATER BORNE POLYURETHANE CAMOUFLAGE

AT QPL-3100

TIRE, SOLID RUBBER AND WHEEL, SOLID RUBBER TIRED

AS QPL-7124

SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED, FOR AIRCRAFT STRUCTURES

AS QPL-81773

COATINGS, POLYURETHANE, ALIPHATIC, WEATHER RESISTANT

AS QPL-8793

PAINT, (GLOSS AND NONSPECULAR), FOR USE ON ELASTOMERIC PIGMENTED FILM

AS QPL-8942

BEARINGS, PLAIN, TFE LINED, SELF ALIGNING

AS QPL-8952

BEARINGS, ROLLER, ROD END, ANTI-FRICTION, SELF-ALIGNING

IS QQ-A-250/15

ALUMINUM ALLOY ALCLAD 7178, PLATE AND SHEET

FSS SS-P-821

PUMICE; GROUND, ABRASIVE

FSS TT-C-1796

CALKING COMPOUNDS, METAL SEAM AND WOOD SEAM

SH TT-R-266

RESIN, ALKYD; SOLUTIONS

YD WW-P-377

PIPE, COPPER, SEAMLESS, STANDARD SIZES

GS ZZ-R-765/9

RUBBER, SILICONE; TUBING, NONMETALLIC, ROUND, FLEXIBLE

FSS A-A-1049

CLOTH, ABRASIVE AND PAPER, ABRASIVE (EMERY)

FSS A-A-1342

WRENCH, BOX, DOUBLE HEAD 15 DEGREE OFFSET EACH END, REGULAR LENGTH

FSS A-A-1555

WATER PAINT, POWDER (CEMENTITIOUS, WHITE & COLORS)

FSS A-A-1887

HOSE, NON-METALLIC (FIRE, SINGLE-JACKET)

FSS A-A-1893

CREOSOTE, TECHNICAL (WOOD PRESERVATIVE)

GS3 A-A-19

SCALE REMOVING COMPOUND (POWDER, SULFAMIC ACID)

FSS A-A-1952

SHOES, LADDER SAFETY

IS A-A-1957

FASTENER, CORRUGATED, WOOD JOINT

FSS A-A-224

HINGE, TEE

AV A-A-2377

VALVE, BALL (SINGLE LINE)

FSS A-A-244

VALVE, AIR VENTING, STEAM, THERMOSTATIC

FSS A-A-2515

BRUSHES, WIRE, ROTARY, END ATTACHMENT, PILOT BONDING

GL A-A-2591

CLAMPING TOOL, STRAP BAND, HOSE

FSS A-A-2635

SOCKET, SOCKET WRENCH

FSS A-A-2817

TIRE PUNCTURE SEALANT AND INFLATOR

FSS A-A-3018

PILOT, REAMER

FSS A-A-3021

EXTRACTOR, SCREW (STUD AND PIPE)

FSS A-A-3029

CUTTER, WIRE ROPE, HAND-OPERATED, HYDRAULIC, HORIZONTAL CUTTING

FSS A-A-3058

PAINT, INTERIOR, FIRE RETARDANT

FSS A-A-3126

COATING SYSTEM: TILE-LIKE HIGH PERFORMANCE ARCHITECTURAL

FSS A-A-3192

BRUSHES, PAINT

GS3 A-A-33

SCALE REMOVING COMPOUND (LIQUID)

GL A-A-433

CLAMP, C-, HEAVY DUTY

IS A-A-50082

PLATFORM, OVERHEAD WORK, FORKLIFT

FSS A-A-501

COUNTERBORE SET

GL A-A-50186

CLOTH, BUCKRAM, WOVEN AND NONWOVEN

SH A-A-50632

STRAINER, SIMPLEX, CONTINUOUS SELF-CLEANING

GS A-A-50966

CHUCKS, DRILL, AUTOMATIC, TAPER SHANK WITH TANG

GS6 A-A-51128

TORCH KIT, SOLDERING (PROPANE GAS)

GS A-A-51132

SOCKET, STRAIGHT SHANK (TURRET TOOL HOLDER)

GS A-A-52010

CLAMP, HANDLE, STEEL TAPE

AT A-A-52444

GASKETS: COMBINATION OF METAL AND NONASBESTOS FACING MATERIAL (METRIC)

AT A-A-52446

SHEET MOLDING COMPOUND: LOW SHRINKAGE (METRIC)

AT A-A-52465

PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS)

AT A-A-52524/8

SEAL, PLAIN ENCASED: DUAL SEALING MEMBERS, OPPOSED, ONE SEAL SPRING LOADED

AT A-A-52555

HOOK, HOIST, BURTON-STYLE

GS6 A-A-55014

TORCH OUTFITS, WELDING, GAS TUNGSTEN ARC WELDING (GTAW) AND COMPONENT PARTS

GS A-A-55761

RUBBER, SILICONE; STRIP, SHAPE 17

GS A-A-55767

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 23

GS A-A-55769

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 25

GS A-A-55771

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 27

GS A-A-55773

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 29

GS A-A-55774

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 30

GS A-A-55775

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 31

GS A-A-55776

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 32

GS A-A-55777

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 33

GS A-A-55781

RUBBER, SILICONE; NONMETALLIC SPECIAL SHAPED SECTION, SHAPE 37

MI A-A-56022

COMPOUND, HEAT SINK, SILICONE AND/OR NON-SILICONE

84 A-A-58051

OPTICAL FLATS

GS6 A-A-59148

WELDING MACHINE, ARC, AC/DC INVERTER, CONSTANT CURRENT

GS3 A-A-59302

MAGNESIUM OXIDE, TECHNICAL

AS A-A-59315/30

POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS TUNGSTEN CARBIDE-COBALT, TYPE II, CLASS 1

AT A-A-59326/16

COUPLING HALF, FEMALE BY EXTERNAL STRAIGHT THREADS, TYPE XVI (FOR USE WITH NATO EQUIPMENT)

AT A-A-59326/18

COUPLING HALF, FEMALE REDUCER BY INTERNAL PIPE THREAD, TYPE XVIII

GS A-A-59412

SWAGING MACHINE, ROTARY, FLOOR-MOUNTED

CC A-A-59440/4

COCK, DRAIN, GROUND KEY, 150 P.S.I., BRASS, STEAM PRESSURE, NPTF-1 THREADS

GS4 A-A-59623

BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 11 DEG. THROUGH 22 DEG., DIMENSION SERIES 19

GS4 A-A-59628

BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEGREES THROUGH 32 DEGREES, DIMENSION SERIES 10

GS4 A-A-59629

BEARING , BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEGREES THROUGH 32 DEGREES, DIMENSION SERIES 02

GS4 A-A-59634

BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEG. THROUGH 45 DEG., DIMENSION SERIES 03

GS4 A-A-59643

BEARINGS, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, MINIATURE SIZE, INSTRUMENT TYPE

AT A-A-59719

100 PERCENT POLYURETHANE SPRAYED ON LININGS

SH A-A-59771

SELF-CONTAINED BREATHING APPARATUS (SCBA)

IS A-A-60005

FRAMES, COVERS, GRATINGS, STEPS, SUMP AND CATCH BASIN, MANHOLE

IS AN100039

COVER-TYPE XIII ENGINE ACCESSORY DRIVE

IS AN102501

BOLT - HEX HEAD, DRILLED SHANK, .5625-18

IS AN104101

BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20

IS AN105901

BOLT-CRES HEX HEAD, DRILLED SHANK, .4375-20

IS AN106901

BOLT - CRES DRILLED HEX HEAD, 1 HOLE, .500-20 (INACTIVE AFTER 27 DEC 1966)

IS AN107701

BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20

IS AN108001

BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18

IS AN115651

SCREW-FLAT FILLISTER HEAD DRILLED SHANK, .250-28 (SUPERSEDED AS115651 THRU AS115700)

IS AN115701

SCREW-FLAT FILLISTER HEAD, DRILLED SHANK, .3125-24 (INACTIVE FOR DESIGN 26 OCT 1972)

99 AN125901

PLUG - STRAIGHT THREAD,

IS AN126821

STUD-STRAIGHT, .625-11 X .625-18

AS AN6045

EXTINGUISHER ASSEMBLY - FIRE, CARBON DIOXIDE, PORTABLE

OS AN757

CONNECTOR, HOSE, FLANGED, FIXED

CC AN8019

TEE - FLYER'S RELIEF TUBE

AS AN8510

KNOCKOUT & THREADED TAPER PIN

99 AND10266

FLANGE-TYPE XVI ACCESSORY MOUNTING

CT CCC-C-443

CLOTH, DUCK, COTTON (SINGLE AND PLIED FILLING YARNS, FLAT)

SH DOD-A-24682

ADDITIVE, FUEL OIL STABILIZER

SH DOD-L-24651

LUBRICATING OIL, FOOD GRADE, FOOD PROCESSING EQUIPMENT (METRIC)

IS DOD-P-63477/7

PIN, SPRING, TUBULAR, SLOTTED, STANDARD DUTY, CRES 420, METRIC

IS DOD-S-63275/1

STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC

IS DOD-T-63549/1

THUMBSCREW, WING HEAD, METRIC

AS DS14243

CLAMP, LOOP, NYLON, METRIC

GS4 DS3225

BEARING, ROLLER, TAPERED, SINGLE ROW OF ROLLERS (METRIC SERIES)

FSS FF-B-588

BOLT, TOGGLE: AND EXPANSION SLEEVE, SCREW

FSS FF-C-88

CASTERS, RIGID AND SWIVEL, INDUSTRIAL DUTY

YD FF-P-101

PADLOCKS

IS FF-S-760

STRAP, RETAINING, (METAL FOR CONDUIT, PIPE, AND CABLE)

GS GG-G-531

GOGGLES, INDUSTRIAL AND SPECTACLES, INDUSTRIAL, PLASTIC

84 GGG-P-61

PARALLELS; STEEL AND CAST-IRON PRECISION-GROUND

FSS GGG-T-558/6

TOOL BOX, PORTABLE (GENERAL, TWO HANDLE TYPE)

FSS H-B-420

BRUSH, PAINT

YD HH-M-351

MILLBOARD, ASBESTOS

GL KK-C-300

CHAMOIS LEATHER, SHEEPSKIN, OIL TANNED

FSS LLL-B-810

BUILDING BOARD, (HARDBOARD) HARD PRESSED, VEGETABLE FIBER

MR MIL-A-13883

ADHESIVE, SYNTHETIC-RUBBER (HOT OR COLD BONDING)

GL MIL-A-3962

ANCHORS, GROUND, ARROWHEAD WITH DRIVING EQUIPMENT

OS MIL-A-82569

ADHESIVE, NEOPRENE BASE, MEDIUM VISCOSITY

AS MIL-A-8923

ALUMINUM ALLOY SHEET, ALCLAD 7079 (ASG)

11 MIL-A-9180

ALUMINUM ALLOY PLATE AND SHEET, 7178

MR MIL-B-12504

BAR, METAL & WIRE (NONELECTRICAL), CARBON AND ALLOY STEEL, COLD DRAWN FOR AP BULLET CORES AND SHOT

AT MIL-B-13207

BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR

SH MIL-B-19564

BEDDING COMPOUND, THERMAL INSULATION PIPE COVERING

GL MIL-B-1963

BUCKLES; AND CLIPS, END, STRAP (FOR BELT, TROUSERS)

AV MIL-B-52209

BOLT ASSEMBLIES, HOOK, TIE: WITH HEXAGON NUT AND TRIANGULAR WASHER

AS MIL-B-6038

BEARING, BALL, BELLCRANK, ANTI-FRICTION, AIRFRAME

AS MIL-B-81793/2

BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, UNFLANGED, CHROMIUM-ALLOY STEEL, ABEC 7P

IS MIL-B-8831/5

BOLT, PROTRUDING HEAD, EXTERNAL WRENCHING, STRAIGHT SHANK, LOW INTERFERENCE, EXPANDABLE ALUMINUM ALLOY SLEEVE, ALLOY STEEL PIN, 180 KSI FTU

SH MIL-C-22395

COMPOUND, END SEALING, THERMAL INSULATION PIPE COVERING-FIRE-, WATER-, AND WEATHER-RESISTANT

AS MIL-C-22520/17

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR CRIMP TYPE REMOVABLE CONTACTS, ELECTRIC CONNECTORS

SH MIL-C-24788

COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH

EC MIL-C-28876/21

CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, ALIGNMENT SLEEVE

AR MIL-C-43157

CLOTH, SPUN VISCOSE RAYON, RESIN IMPREGNATED

OS MIL-C-453

CORD, LACING, SILK (FOR ASSEMBLY OF PROPELLING CHARGES)

AV MIL-C-46079

COATING, EPOXY, BAKING TYPE FOR MAGNESIUM CASTINGS

IS MIL-C-5501/15

PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (RESISTOFLEX DYNATURE FITTINGS)

AS MIL-C-81021

COPPER-BERYLLIUM ALLOY (COPPER ALLOY NUMBERS C17500 AND C17510), STRIP

AS MIL-C-81104

CORD, POLYAMIDE, HIGH TEMPERATURE RESISTANT

84 MIL-C-83959

CYLINDER, AIR PURIFIER

GS MIL-D-20550

DIATOMACEOUS EARTH

11 MIL-D-26549

DESCALING COMPOUND, ALKALINE, HOT SECTION JET ENGINE PARTS

GS MIL-D-47225

DISCS, PLASTIC, POLYETHYLENE TEREPHTHALANE, PRESSURE SENSITIVE, ADHESIVE COATED

OS MIL-D-82675

DIISOCYANATE, DIMERYL, C36 ALIPHATIC, TECHNICAL (DDI)

CC MIL-DTL-13444/2

HOSE ASSEMBLY, RUBBER: FUEL AND OIL, LOW PRESSURE, FLARED TUBE

SH MIL-DTL-24441/28

PAINT, EPOXY-POLYAMIDE, YELLOW, FORMULA 158, TYPE III

SH MIL-DTL-24441/33

PAINT, EPOXY-POLYAMIDE, DARK GRAY RO3.6, FORMULA 154, TYPE IV

CC MIL-DTL-29210

HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED, 250 PSIG, SATURATED STEAM SERVICE

CT MIL-DTL-44271

TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER), ASSEMBLY COMPONENTS

CC MIL-DTL-52618/3

FITTINGS, PIPE, ALUMINUM-ALLOY (THREADED) 150-POUND 90-DEGREE ELBOWS (REDUCING SIZES)

CC MIL-DTL-83798/6

FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 90 DEGREES

IS MIL-DTL-85667/3

BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 225 KSI FSU

IS MIL-DTL-85667/5

BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK TITANIUM ALLOY PIN,160 KSI FTU

SH MIL-E-24759

EDUCATOR ASSEMBLY, IN-LINE, 90 GALLONS PER MINUTE, PORTABLE AQUEOUS FILM FORMING FOAM (AFFF) LIQUID CONCENTRATE

11 MIL-E-5008

ENGINE, AIRCRAFT, TURBOJET, MODEL SPECIFICATIONS FOR, OUTLINE AND INSTRUCTIONS FOR PREPARATION,

SH MIL-F-22963

FILTER, AIR, ELECTROSTATIC (PRECIPITATOR) WITH POWER SUPPLY FOR ENVIRONMENTAL CONTROL SYSTEMS

99 MIL-F-4209

FASTENER, METAL, NUT-SLEEVE ASSEMBLY

EA MIL-F-51536

FILTER UNIT, GAS-PARTICULATE, 200 CFM, 208V, 400 HZ, M56

GS MIL-F-80233

FURNACES, VACUUM, HEAT TREATING, INTEGRAL QUENCH

AS MIL-F-85421/16

FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON RUN, MALE ENDS

GS MIL-G-3787

GLASS, LAMINATED, FLAT; (EXCEPT AIRCRAFT)

IS MIL-G-85613/1

GROMMET, HARD SEAT, RELIABILITY AND MAINTAINABILITY (NEW CONSTRUCTION AND REPAIR) REQUIREMENTS FOR

SH MIL-H-18160

HOSE ASSEMBLIES, CORRUGATED STEEL, 200LB/IN2 AND 425 DEGREES F MAXIMUM STEAM SERVICE RATING

SH MIL-H-24135/6

HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE WIRE BRAID OR TWO-SPIRAL AND ONE-WIRE BRAID, HIGH PRESSURE, SIZES -4 THROUGH -32 FOR PHOSPHATE ESTER BASE HYDRAULIC FLUIDS)

SH MIL-H-24135/8

HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES, SPIRAL WRAPPED WIRE, HIGH PRESSURE, SIZES -6 THROUGH -16, FOR PHOSPHATE ESTER BASE FLUIDS)

84 MIL-H-27507

HEATER, DUCT TYPE, PORTABLE, TRAILER MOUNTED HDU-13/M

AT MIL-H-3912

HARDWOOD; FLOORBOARDS AND PLATFORMS: FOR MILITARY VEHICLES

GS MIL-H-865

HOLDER, ELECTRODE, SHIELDED METAL, ARC WELDING

IS MIL-H-9859

HANDWHEEL, ORDNANCE

MR MIL-HDBK-699

GUIDE TO THE SPECIFICATIONS FOR FLEXIBLE RUBBER PRODUCTS

AS MIL-I-11695

IRON, MAGNETIC: BAR, SHEET, AND STRIP

AV MIL-L-12197

LADDERS, FIRE, EXTENSION; LADDERS, FIRE, ROOF; AND LADDERS, FIRE, COMBINATION

YD MIL-L-29151

LOCKS AND LOCK SETS, EXTERIOR, ORDNANCE HIGH SECURITY

GS MIL-L-376

LEAD DIOXIDE, TECHNICAL

AS MIL-L-85824

LIFE RAFT, INFLATABLE, ONE-MAN, VEE BOTTOM, LRU-18/U

EA MIL-M-3281

MANGANESE DIOXIDE, TECHNICAL

GS MIL-M-3800

METALLIZING SYSTEM (WIRE GAS), GUNS & ACCESSORIES

GS MIL-M-80044

MILLING MACHINES, HORIZONTAL SPINDLE, KNEE TYPE, SIZE NUMBERS 2, 3, 4, AND 5

AS MIL-M-81288

MOUNTING BASES, FLEXIBLE PLASTIC FOAM

AR MIL-N-3399

2-NITRODIPHENYLAMINE

AT MIL-P-14401

PADS, CUSHIONING: PERSONNEL-PROTECTION, VEHICULAR

SH MIL-P-17349

PACKING MATERIAL, ROD, HIGH PRESSURE, ASBESTOS

SH MIL-P-19550

PRESERVATIVE TREATMENT PLYWOOD (SHIP AND BOAT USE)

CR MIL-P-22748

PLASTIC, POLETHYLENE AND COPOLYMERS, HIGH DENSITY, MOLDING AND EXTRUSION MATERIAL

AS MIL-P-23242

PLASTIC COATING COMPOUND, STRIPPABLE, FOR ELECTROPLATING

SH MIL-P-23470/2

PIN-RIVET, THREADED, BUTTON HEAD, TAPERED SHANK, CORROSION-RESISTANT STEEL

SH MIL-P-24344

PRODUCER, LIQUID OXYGEN AND LIQUID NITROGEN (SHIPBOARD TYPE-LOW PRESSURE)

SH MIL-P-24364

PLASTIC SHEETS, LAMINATED, THERMOSETTING, ELECTRICAL-INSULATING SHEET, GLASS-MAT

SH MIL-P-24396

PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE)

YD MIL-P-2780

PIPE, BRASS, SEAMLESS, IRON-PIPE SIZE, STANDARD AND EXTRA STRONG

MR MIL-P-43081

PLASTIC MOLDING MATERIAL (POTTING AND IMPREGNATING), POLYETHYLENE, LOW MOLECULAR WEIGHT

GL MIL-P-44305

PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE

MI MIL-P-47010

PAINT, HEAT RESISTANT, SILICONE MODIFIED, LUSTERLESS

GS MIL-P-80109

PLASMA SPRAY SYSTEMS, MANUALLY OPERATED