|
NAS 410 |
NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL |
|
NAS SET RENEWAL |
RENEWAL FOR NAS SET - NAS & NASM |
|
NAS 412 |
FOREIGN OBJECT DAMAGE/FOREIGN OBJECT DEBRIS (FOD) PREVENTION |
|
NASM33540 |
SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR |
|
NASM16555 |
PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER NOMINAL SIZE) |
|
NAS 1611 |
PACKING, ETHYLENE PROPYLENE PREFORMED O-RING PHOSPHATE ESTER RESISTANT (-65 DEG F TO 250/300 DEG F) |
|
NAS 1291 |
NUT, SELF-LOCKING, HEXAGON-LOW HEIGHT, LIGHT WEIGHT |
|
NAS 1612 |
PACKING, ETHYLENE PROPYLENE PREFORMED, O-RING PHOSPHATE ESTER RESISTANT, STRAIGHT THREAD TUBE FITTING BOSS (-65 DEG F TO 250/300DEG F) |
|
NASM20995 |
WIRE, SAFETY OR LOCK |
|
NAS 411 |
HAZARDOUS MATERIALS MANAGEMENT PROGRAM |
|
NAS 43 |
SPACER, SLEEVE - SCREW AND BOLT |
|
NAS 77 |
BUSHING-FLANGED, PRESS FIT STEEL, CRES, BRONZE & COPPER |
|
NAS 1613 |
SEAL ELEMENT, PACKING, PREFORMED, ETHYLENE PROPYLENE RUBBER |
|
NAS 9301 |
RIVET-BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE A, CLASS 1, CODE B AND E |
|
NASM24665 |
PIN, COTTER (SPLIT) |
|
NAS 907 |
DRILLS, HIGH SPEED STEEL AND COBALT, 1/16 INCH THRU 1/2 INCH |
|
NAS 979 |
UNIFORM CUTTING TESTS - NAS SERIES METAL CUTTING EQUIPMENT SPECIFICATIONS |
|
NAS 331 |
BEARING INSTALLATION AND RETENTION BY SWAGING OR STAKING |
|
NAS 3610 |
CARGO UNIT LOAD DEVICES - SPECIFICATION FOR |
|
NAS 537 |
BUSHING, SLEEVE-PRESS FIT UNDERSIZE INSIDE DIAMETER |
|
NAS METRIC SET RENEWAL |
RENEWAL FOR NAS METRIC SET |
|
NASM16556 |
PIN, STRAIGHT, HEADLESS (DOWEL)(.001 OVER NOMINAL SIZE) |
|
NAS 1760 |
FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
|
NAS 9302 |
RIVET-BLIND, 100 DEG FLUSH HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE A, CLASS 2, CODE B AND E |
|
NAS 9304 |
RIVET-BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE B, CLASS 1, CODE B AND E (OVERSIZE DIAMETER) |
|
NASM1312 |
FASTENER TEST METHODS |
|
NASM1312-8 |
FASTENER TEST METHODS - METHOD 8 TENSILE STRENGTH |
|
NASM16562 |
PIN, SPRING-TUBULAR, SLOTTED |
|
NASM20392 |
PIN, STRAIGHT, HEADED DRILLED SHANK |
|
NASM35756 |
KEY, WOODRUFF, STEEL, ALLOY, WITH KEYWAY AND KEY SLOT DIMENSIONS |
|
NAS 1283 |
FASTENERS, MALE THREADED, SELF-LOCKING |
|
NAS 538 |
BUSHING - FLANGED, PRESS FIT UNDERSIZE INSIDE DIAMETER |
|
NAS 75 |
BUSHING-PLAIN PRESS FIT, STEEL OR CRES |
|
NAS 76 |
BUSHING-PLAIN, PRESS FIT, COPPER & BRONZE |
|
NAS 9305 |
RIVET-BLIND, 100 DEG FLUSH HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE B, CLASS 2, CODE B AND E (OVERSIZE DIAMETER) |
|
NASM171401-171900 |
PIN-SPRING, CORROSION RESISTANT STEEL |
|
NAS 1407 |
PIN-STRING, COILED |
|
NAS 1523 |
PACKING WITH RETAINER |
|
NAS 1756 |
STREAMER, WARNING |
|
NAS 3306 |
FACILITY REQUIREMENTS FOR AIRCRAFT OPERATIONS |
|
NAS 42 |
SPACER, SLEEVE-RIVET |
|
NAS 498 |
FASTENERS, ALLOY STEEL EXTERNALLY THREADED, 95 KSI FSU, 450 DEGREES F |
|
NAS 618 |
FASTENER - RECOMMENDED SHANK, HOLE AND HEAD-TO-SHANK RADIUS LIMITSFOR |
|
NAS 6965-6972 |
PIN, SWAGE LOCKING, A286 CRES, PROTRUDING HEAD, TENSION, PULL-TYPE |
|
NAS 850 |
GENERAL PACKAGING STANDARD |
|
NAS 9303 |
RIVET-BLIND, 100 DEG FLUSH SHEAR HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE A, CLASS 3, CODE B AND E |
|
NAS 937 |
DRILLS, DOUBLE MARGIN STEPPED, HIGH SPEED STEEL AND COBALT, 1/8 INCH THRU 1/2 INCH |
|
NAS 965 |
DRILLS, HIGH SPEED STEEL AND COBALT THREADED SHANK 1/16 INCH THRU F |
|
NAS 986 |
END MILLS, FINISHING, HIGH SPEED STEEL .125 INCH THROUGH 3.000 INCH DIAMETER |
|
NASM1312-1 |
FASTENER TEST METHODS - METHOD 1 SALT SPRAY |
|
NASM1312-13 |
FASTENER TEST METHODS - METHOD 13 DOUBLE SHEAR TEST |
|
NASM1312-7 |
FASTENER TEST METHODS - METHOD 7 VIBRATION |
|
NASM17987 |
PIN, QUICK RELEASE, SELF-RETANING, POSITIVE LOCKING, SINGLE ACTING, RING HANDLE |
|
NASM21143 |
PIN, STRAIGHT, HEADLESS (DOWEL), GENERAL SPECIFICATION FOR |
|
NASM35675 |
PIN, GROOVED, HEADLESS-LONGITUDINAL STRAIGHT GROOVE, CORROSION-RESISTING STEEL |
|
NASM6812 |
FASTENERS, EXTERNALLY THREADED ALLOY STEEL, CORROSION RESISTANT STEEL, ALUMINUM 60,000 PSI TO 125,000 PSI |
|
NAS 1042 |
SHACKLE-ANCHOR, FORGED CARBON STEEL, ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1091 |
STREAMER ASSEMBLY, WARNING |
|
NAS 1195 |
SHIM - MINIATURE ANCHOR NUT |
|
NAS 1333-1346 |
PIN, QUICK RELEASE, POSITIVE LOCKING, SINGLE, ACTING |
|
NAS 1347 |
IDENTIFICATION OF MALE THREADED FASTENERS |
|
NAS 1435 |
TERMINAL-STRAP, CABLE EYE END AND FORK END |
|
NAS 1455 |
CHAIN WELDLESS FLAT TYPE LINK |
|
NAS 1465-1472 |
PIN SWAGE LOCKING, STEEL, STANDARD AND OVERSIDE, PROTRUDING HEAD, TENSION, PULL-TYPE |
|
NAS 1747 |
SPLICE, CONDUCTOR AND SHIELD TERMINATION, SOLDER STYLE, HEAT SHRINKABLE, INSULATED, SPECIFICATION FOR |
|
NAS 1922 |
CLAMP, HOSE, BAND, TANGENTIAL WORM, LIGHT WEIGHT |
|
NAS 3426 |
ELECTRICAL HARDNESS-CABLE ASSEMBLIES, PACKAGING OF |
|
NAS 354 |
ROD - CONTROL, SOLID STEEL |
|
NAS 398 |
CLAMP-RATCHET, THREE PIECE |
|
NAS 47 |
SPACER, SLEEVE, NONMETALLIC, EPOXY AND PHENOLIC, SCREW AND BOLT |
|
NAS 516 |
FITTING, LUBRICATION - .1250 INCH DRIVE, FLUSH TYPE |
|
NAS 549 |
WASHER,NONMETALLIC-INSULATING, ELECTRICAL |
|
NAS 561 |
PINS-SPRING,SLOTTED & COILED,HEAVY DUTY |
|
NAS 581 |
INVOLUTE SPLINE-SHAFT(30 DEGREE FULL FILLET) |
|
NAS 726 |
GEAR-SPUR, 20 DEGREE INVOLUTE, LOW INERTIA, 48 AND FINER PITCH |
|
NAS 802 |
SPECIFICATION - AIRCRAFT SAFETY BELTS |
|
NAS 913 |
MILLING MACHINE - NUMERICALLY CONTROLLED PROFILING AND CONTOURING |
|
NASM10971 |
PIN, SPRING, TUBULAR (COILED AND SLOTTED) |
|
NASM1312-11 |
FASTENER TEST METHODS - METHOD 11 TENSION FATIGUE |
|
NASM1312-14 |
FASTENER TEST METHODS - METHOD 14 STRESS DURABILITY INTERNALLY THREADED FASTENERS |
|
NASM1312-31 |
FASTENER TEST METHODS - METHOD 31, TORQUE |
|
NASM1312-6 |
FASTENER TEST METHODS - METHOD 6 HARDNESS |
|
NASM1312-9 |
FASTENER TEST METHODS - METHOD 9 STRESS CORROSION |
|
NASM33750 |
RECESS-DOVETAIL SLOT AND CONICAL DOVETAIL SLOT, DIMENSIONS OF RECESS, CAGE, AND DRIVER FOR |
|
AIA TARC 82-29 |
STANDARDS FOR SYMBOLOGY AND GRAPHIC SIGNAGE ABOARD COMMERCIAL AIRCRAFT |
|
AIA TR 91-1 |
AEROSPACE INDUSTRIES ASSOCIATION PUBS-119 PUBLICATION DOD LIAISON RECOMMENDATION FOR HAZARDOUS MATERIALS WARNING IN TECHNICAL DATA |
|
NAS 1043 |
SHACKLE-CHAIN, FORGED CARBON STEEL, SCREW PIN (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1044 |
SHACKLE-CHAIN, FORGED CARBON STEEL, ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1201 |
CHAIN - BEAD COMPONENTS AND ASSEMBLY |
|
NAS 1212 |
STRAP ASSEMBLY - TIE DOWN |
|
NAS 1353-1366 |
PIN, QUICK RELEASE, POSITIVE LOCKING, DOUBLE ACTING |
|
NAS 1387 |
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, UNINSULATED (CLASS 2) |
|
NAS 1475-1482 |
PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, 100 DEG HEAD (MS 20426), TENSION, PULL-TYPE |
|
NAS 1486-1492 |
PIN, SWAGE LOCKING, STEEL, 100 DEG HEAD (MS24694),TENSION, STUMP-TYPE |
|
NAS 1514 |
RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES |
|
NAS 1564 |
REDUCER, FLARED TUBE |
|
NAS 1744 |
SPLICE, CONDUCTOR, SOLDER STYLE, HOT AIR OR INFRARED, SHRINKABLE, INSULATED, IMMERSION RESISTANT |
|
NAS 1800 |
RECESS, SIX LOBE DRIVE - INTERNAL - DIMENSIONS FOR RECESS AND GAGES |
|
NAS 1841-1854 |
STUD ASSEMBLY - THREADED METAL DOUBLE STEP |
|
NAS 302-310 |
CABLE ASSEMBLY SWAGED TYPE - TYPE I TERMINALS |
|
NAS 312-320 |
CABLE ASSEMBLY SWAGED TYPE - TYPE I AND TYPE II TERMINALS |
|
NAS 3354 |
FIXTURES - VIBRATION TEST-SELF-LOCKING NUTS |
|
NAS 3402 |
BAG, TRANSPARENT, SINGLE ITEM |
|
NAS 3403 |
BAG, TRANSPARENT, MULTIPLE ITEM |
|
NAS 3453 |
FASTENERS, AEROSPACE, PACKAGING OF |
|
NAS 380 |
NAS DOCUMENTS PREPARATION AND MAINTENANCE IN THE INCH SYSTEM OF UNITS |
|
NAS 4006 |
ALUMINUM COATING |
|
NAS 451 |
PLUG BUTTON |
|
NAS 494 |
TERMINAL - BALL TYPE CABLE |
|
NAS 532 |
GUARD,SWITCH TOGGLE,THREE POSITION |
|
NAS 594 |
COUPLING-RIGID TUBE CONNECTOR, CORROSION RESISTANT STEEL |
|
NAS 595 |
RING-RIGID TUBE CONNECTOR, CORROSION RESISTANT STEEL |
|
NAS 703 |
WIRE, ELECTRICAL, INSULATED, COPPER, HIGH TEMPERATURE, HOOK-UP AND GENERAL PURPOSE (FOR 200 DEG CELSIUS SERVICE) |
|
NAS 73 |
BUSHING-CLAMP-UP, STEEL, CADMIUM PLATED |
|
NAS 74 |
BUSHING-CLAMP-UP,BRONZE |
|
NAS 813 |
CAP-PROTECTIVE, ELECTRICAL CONNECTOR |
|
NAS 815 |
PLUG-PROTECTIVE, FLARED HOSE OR TUBE ASSEMBLY |
|
NAS 823 |
CAST SURFACE COMPARISON STANDARD |
|
NAS 855 |
INDUSTRIAL PACKAGING STANDARD |
|
NAS 897 |
REAMERS, CHUCKING 0.0469 INCH THRU 1.5000 INCHES |
|
NAS 978 |
NUMERICALLY CONTROLLED MACHINING CENTER (COMBINATION DRILLING, BORING, MILLING AND TAPPING MACHINES) |
|
NAS 9800 |
HEAD PROTRUSION GAGING 100 DEG FLUSH HEAD FASTENERS GAGE BLOCK, GAGE DIAMETERS, AND STYLUS |
|
NAS 985 |
UNIFORM ALIGNMENT TESTS - NAS 900 SERIES EQUIPMENT SPECIFICATIONS |
|
NAS 997 |
MACHINE PLASMA ARC WELDING EQUIPMENT |
|
NASM1312-10 |
FASTENER TEST METHODS - METHOD 10 STRESS RUPTURE |
|
NASM1312-12 |
FASTENER TEST METHODS - METHOD 12 THICKNESS OF METALLIC COATINGS |
|
NASM1312-16 |
FASTENER TEST METHODS - METHODS 16 CLAMPING FORCE FOR INSTALLATIONFORMED FASTENERS |
|
NASM1312-17 |
FASTENER TEST METHODS - METHODS 17 STRESS RELAXATION |
|
NASM1312-2 |
FASTENER TEST METHODS - METHOD 2 INTERACTION |
|
NASM1312-20 |
FASTENER TEST METHODS - METHODS 20 SINGLE SHEAR |
|
NASM1312-21 |
FASTENER TEST METHODS METHOD 21 SHEAR JOINT FATIGUE CONSTANT AMPLITUDE |
|
NASM1312-5 |
FASTENER TEST METHODS - METHOD 5 STRESS DURABILITY |
|
NASM14531 |
PIN, QUICK RELEASE WITH WARNING STREAMER ASSEMBLY |
|
NASM1515 |
FASTENER SYSTEMS FOR AEROSPACE APPLICATIONS |
|
NASM17984 |
PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE |
|
NASM17989 |
PIN, QUICK RELEASE, SELF-RETAINING POSITIVE LOCKING, DOUBLE ACTING""L"" HANDLE |
|
NASM20066 |
KEY, MACHINE-SQUARE IN CROSS SECTION, BOTH ENDS SQUARE |
|
NASM21143/1 |
PIN, STRAIGHT, HEADLESS, (DOWEL) (.0002 OVER SIZE), CRES 303 |
|
NASM21143/2 |
PIN, STRAIGHT, HEADLESS, (DOWEL) (.0002 UNDER SIZE), CRES 303 |
|
NASM24692 |
PIN, TAPERED, PLAIN |
|
NASM45909 |
STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
|
NASM51400 |
PIN, STRAIGHT, HEADLESS |
|
NASM51932 |
PIN, STRAIGHT-HEADLESS; DRILLED FOR COTTER PINS |
|
NASM51987 |
PIN, SPRING-TUBULAR, COILED, LIGHT DUTY |
|
NASM63540 |
STUD, SELF-CLINCHING - GENERAL SPECIFICATION FOR |
|
NASM63540/1 |
STUD, SELF-LOCKING, FLUSH HEAD, RIBBED CLINCH TYPE |
|
NASM63540/2 |
STUD, SELF-LOCKING, FLUSH AND PROTRUDING HEAD |
|
NASM63540/3 |
STUD, SELF-CLINCHING, FLUSH HEAD, HEX CLINCH TYPE |
|
NASM63540/4 |
STUD, SELF-LOCKING, CONCEALED HEAD, KNURLED CLINCH TYPE |
|
NASM63540/5 |
STUD, SELF-LOCKING, CONCEALED HEAD, HEX CLINCH TYPE |
|
NASM63540/7 |
STUD, SELF-LOCKING, BROACHING TYPE |
|
AIA AIRCRAFT INDUSTRY |
AIRCRAFT INDUSTRY SURVEYS ON CURRENT FLIGHT TEST INSTRUMENTATION PRACTICE AND CURRENT APPLICATION OF AUTOMATIC DATA PROCESSING AIRCRAFT RESEARCH AND TESTING COMMITTE |
|
AIA CARRIAGE OF HANDICAP |
CARRIAGE OF HANDICAPPED PERSONS |
|
AIA DESIGN MANUAL |
DESIGN MANUAL ON AIRCRAFT ELECTRICAL INSTALLATIONS |
|
AIA HIGH-STRENGTH |
HIGH-STRENGTH, HIGH-TEMPERATURE MATERIALS FOR STANDARD PARTS SYMPOSIUM |
|
AIA TR 91-2 |
JOINT DEPARTMENT OF DEFENSE/INDUSTRY AD HOC COMMITTEE ""REDUCING PROCUREMENT LEAD TIMES"" |
|
AIA TR 92-1 |
GUIDE TO SIMPLIFIED GRAPHICS |
|
AIA TR 93-1 |
PARTS, MATERIALS AND PROCESSED (PMP) LOG AND SYSTEMS LEVEL ENGINEERING DOCUMENTS (SLED) LOG |
|
AIA/AMEC PROJECT 259-15 |
ASSEMBLY DRILLING METHODS FOR AEROSPACE MATERIALS |
|
AIA/NAS LAN LICENSE 1 |
AIA/NAS LAN LICENCE 1 USER |
|
ATC TR 101 |
EVALUATION OF ALUMINUM ALLOY 7001-T75 |
|
ATC TR 102 |
RELIABILITY DEMONSTRATION FOR AIRCRAFT GAS TURBINE ENGINES |
|
ATC TR 103 |
STRUCTURAL RELIABILITY - PHASE 1 REPORT |
|
ATC TR 104 |
AIRCRAFT GUST CRITERIA SURVEY |
|
CONSERVATION HANDBOOK |
CONSERVATION HANDBOOK - FOR THE USE OF THE INDUSTRY AND THE MILITARY SERVICES |
|
DESIGN MANUAL ON AIRCRAFT |
DESIGN MANUAL ON AIRCRAFT FIRE PROTECTION FOR RECIPROCATING AND GAS TURBINE ENGINE INSTALLATIONS |
|
EETC REPORT #1 |
INTERIM DICTIONARY OF TERMS AND DEFINITIONS RELATING TO RELIABILITY |
|
EETC REPORT #10 |
RESULTS OF GYRO INDUSTRY SURVEY AND RECOMMENDATIONS FOR PHASE 11 EPC/GYRO PROJECT |
|
EETC REPORT #12 |
PROPOSED VERTICAL GYRO TEST INSTRUCTIONS |
|
EETC REPORT #13 |
PROPOSED DIRECTIONAL GYRO TEST INSTRUCTION |
|
EETC REPORT #14 |
PROPOSED FREE GYRO TEST INSTRUCTIONS |
|
EETC REPORT #15 |
ESSENTIAL PERFORMANCE CRITERIA FOR GYROS IN TYPICAL APPLICATIONS |
|
EETC REPORT #16 |
GUIDE LINES FOR RELIABILITY CONSIDERATIONS FOR AIA/EPC |
|
EETC REPORT #17 |
RELIABILITY CONSIDERATIONS IN DESIGN REVIEWS |
|
EETC REPORT #18 |
RELIABILITY AND RELATED DEFINITIONS |
|
EETC REPORT #19 |
RELIABILITY EDUCATIONAL MATERIAL EXCHANGE |
|
EETC REPORT #20 |
RELIABILITY PREDICTION TECHNIQUES |
|
EETC REPORT #21 |
A SURVEY OF RELIABILITY ASPECTS OF INCENTIVE CONTRACTS |
|
EETC REPORT #22 |
SURVEY ESTIMATE OF DOLLAR SAVINGS RESULTING FROM THE UNIFORMITY PROGRAM FOR GENERAL SPECIFICATIONS FOR ELECTRONIC EQUIPMENT |
|
EETC REPORT #23 |
A SURVEY ON METHODS OF IMPLEMENTING A FAILURE REPORTING SYSTEM |
|
EETC REPORT #24 |
DIRECTORY OF GOVERNMENT RELIABILITY OFFICES |
|
EETC REPORT #25 |
A SURVEY ON ELEMENTS OF RELIABILITY CONTROL |
|
EETC REPORT #26 |
TEST CODE FOR HIGH POTENTIAL AND INSULATION TESTING |
|
EETC REPORT #27 |
GUIDELINES TO CONTROLLED RELIABILITY RELAY SPECIFICATIONS |
|
EETC REPORT #28 |
RELIABILITY PREDICTION ADJUSTMENT FACTORS |
|
EETC REPORT #29 |
REQUIREMENTS FOR RELIABILITY MEASUREMENTS IN MILITARY AND NASA SPECIFICATIONS |
|
EETC REPORT #3 |
RELIABILITY INDOCTRINATION THROGH EDUCATION |
|
EETC REPORT #30 |
STANDARD ACCELEROMETER TERMINOLOGY |
|
EETC REPORT #31 |
NUCLEAR RADIATION ENVIRONMENT |
|
EETC REPORT #32 |
THE EFFECTS OF SPACE ENVIRONMENT RADIATION UPON CONNECTOR MATERIALS AND FINISHES |
|
EETC REPORT #5 |
STANDARD GYRO TERMINOLOGY |
|
EETC REPORT #6 |
ELECTRONIC COMPONENT PART STATUS AS RELATED TO SYSTEM RELIABILITY REPORT AND RECOMMENDATIONS |
|
EETC REPORT #7 |
RELIABILITY ASPECTS OF HUMAN ENGINEERING BIBLIOGRAPHY |
|
EETC REPORT #8 |
GUIDELINES FOR RELIABILITY PROPOSALS, SPECIFICATIONS, AND PROGRAMS |
|
EETC REPORT #9 |
RELIABILITY SPECIFICATION TREE AND MAINTAINABILITY SPECIFICATION TREE |
|
EPC 60-68 |
RATE-INTEGRATING GYRO TEST INSTRUCTIONS |
|
GCS 56-45C |
SOLENOID VALVES, 3-WAY |
|
GCS 57-20E |
REGULATORS, GAS PRESSURE |
|
GCS 59-38 |
GAS PRESSURE RELIEF VALVES |
|
GCS 60-9 |
CHECK VALVES |
|
GCS 61-28D |
COUPLING ASSEMBLY, QUICK DISCONNECT MECHANICALLY OPERATED |
|
NA 0231-0233 |
SPACER, STEPPED, SWAGE TYPE, METRIC |
|
NA 0235-0236 |
INSERT, SANDWICH PANEL, MOLDED IN, CSK, THRU CLEARANCE, AL ALLOY/CRES, METRIC |
|
NAM 51474 |
SCREW, CAP, HEX HEAD, FULLY THREADED - METRIC |
|
NAS 10 |
STANDARD FORM FOR NATIONAL AIRCRAFT STANDARD DRAWINGS |
|
NAS 100 |
ROD ASSEMBLY - CONTROL, WELDED TUBE, 3/8 O.D., STEEL, 1/4 ADJUSTABLE BEARING ENDS |
|
NAS 1000 |
TUBE END-STANDARD DIMENSIONS FOR INSIDE DOUBLE FLAIRE |
|
NAS 10000 |
NA DOCUMENTS PREPARATION AND MAINTENANCE IN SI (METRIC) UNITS |
|
NAS 10001 |
PREFERRED METRIC UNITS FOR AEROSPACE |
|
NAS 1001 |
TUBE END-STANDARD DIMENSIONS FOR OUTSIDE DOUBLE FLARE |
|
NAS 1002 |
STUD, ELECTRICAL, TERMINAL BLOCK |
|
NAS 101 |
WELDED ASSEMBLY - TUBE, 3/8 O.D., STEEL, THREADED ROD ENDS |
|
NAS 102 |
TUBE-CONTROL, 3/8 O.D. AND 1/2 O.D., STEEL |
|
NAS 103 |
ROD ASSEMBLY - CONTROL, WELDED TUBE, 1/2 O.D., STEEL, 1/4 ADJUSTABLE CLEVIS ENDS |
|
NAS 104 |
ROD ASSEMBLY - CONTROL, WELDED TUBE, 1/2 O.D., STEEL, 5/16 ADJUSTABLE CLEVIS ENDS |
|
NAS 1045 |
THIMBLE, HEAVY, WROUGHT STEEL, WIRE CABLE (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1046 |
CLIP-WIRE ROPE, FORGED CARBON STEEL (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1049 |
SLING LINK, WELDED, ALLOY STEEL, PEAR SHAPED (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1050 |
GRAB HOOK, FORGED ALLOY STEEL, DIRECT EYE (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1051 |
SAFETY HOOK, FORGED CARBON STEEL, SNAP, DIRECT EYE (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1052 |
S HOOK, ALLOY STEEL (FOR GROUND SUPPORT EQUIPMENT) |
|
NAS 1056 |
SPACER, SLEEVE-RIVET, HIGH TEMPERATURE, NON MAGNETIC |
|
NAS 1057 |
SPACER, SLEEVE-SCREW AND BOLT HIGH TEMPERATURE, NON-MAGNETIC |
|
NAS 106 |
ROD ASSEMBLY - CONTROL, WELDED TUBE, 1/2 O.D., STEEL, 5/16 ADJUSTABLE CLEVIS AND BEARING ENDS |
|
NAS 1060 |
BUS - HIGH TEMPERATURE - TERMINAL BLOCK |
|
NAS 1062 |
STRIP - HIGH TEMPERATURE TERMINAL BLOCK NUT INSULATING |
|
NAS 1063 |
STRIP - HIGH TEMPERATURE TERMINAL BLOCK BASE INSULATING |
|
NAS 1064 |
TERMINAL BLOCK - ELECTRICAL, HIGH TEMPERATURE |
|
NAS 1065 |
STUD - HIGH TEMPERATURE ELECTRICAL TERMINAL BLOCK |
|
NAS 1066 |
TERMINAL BLOCK ASSEMBLY - ELECTRICAL HIGH TEMPERATURE |
|
NAS 1069 |
TENSION FATIGUE TEST PROCEDURE FOR AERONAUTICAL FASTENERS |
|
NAS 107 |
ROD ASSEMBLY - CONTROL, WELDED TUBE, 1/2 O.D., STEEL, 1/4 ADJUSTABLE BEARING ENDS |
|
NAS 1071 |
SWITCH - TOGGLE DOUBLE POLE, THREE POSITION |
|
NAS 1072 |
GUARD, CHANNEL, TOGGLE SWITCH |
|
NAS 1073 |
GUARD, TWO-POSITION, TOGGLE-SWITCH LOCK |
|
NAS 1074 |
TURNBUCKLE ASSEMBLIES, CLIP LOCKING ASSEMBLY AND SAFETYING OF |
|
NAS 1075 |
BEARING-ROD END 3/8-24 EXTERNAL THD SELF-ALIGNING ANTI-FRICTION |
|
NAS 1076 |
LUBRICANT, HIGH GEAR LOADING, ALL WEATHER |
|
NAS 1077 |
FITTING END, HOSE, STANDARD DIMENSIONS FOR FLARELESS TUBE |
|
NAS 1078 |
RECESS AND RECESS GAGE DIMENSIONS - TORQ-SET |
|
NAS 1079 |
DRIVER-CONTROL DIMENSIONS, TORQUE-SET |
|
NAS 108 |
ROD ASSEMBLY - CONTROL, WELDED TUBE, 1/2 O.D., STEEL, 5/16 ADJUSTABLE BEARING ENDS |
|
NAS 1082 |
INSIGNIA,NATIONAL |
|
NAS 1089 |
STREAMER, WARNING |
|
NAS 109 |
WELDED ASSEMBLY - TUBE, 1/2 O.D., STEEL, 1/4 THREADED ROD ENDS |
|
NAS 1090 |
HOOK, CHAIN, S |
|
NAS 1092 |
TERMINAL BOARD ASSEMBLY-ELECTRICAL |
|
NAS 1093 |
TERMINAL BOARD-ELECTRICAL |
|
NAS 1094 |
STRIP-TERMINAL BOARD BASE INSULATING ***INACTIVE USE MS 25123*** |
|
NAS 1095 |
FLARELESS FITTINGS CONNECTIONS FABRICATION AND ASSEMBLY |
|
NAS 110 |
WELDED ASSEMBLY - TUBE, 1/2 O.D., STEEL, 5/16 THREADED ROD ENDS |
|
NAS 111 |
ROD ASSEMBLY - CONTROL, RIVETED TUBE, 3/8 O.D., ALUMINUM ALLOY, 1/4 ADJUSTABLE CLEVIS ENDS |
|
NAS 114 |
RIVETED ASSEMBLY - TUBE, 3/8 O.D., ALUMINUM ALLOY, THREADED ROD ENDS |
|
NAS 115 |
TUBE - CONTROL, 3/8 O.D. AND 1/2 O.D., ALUMINUM ALLOY |
|
NAS 116 |
ROD ASSEMBLY - CONTROL, RIVETED TUBE, 1/2 O.D., ALUMINUM ALLOY, 1/4 ADJUSTABLE CLEVIS ENDS |
|
NAS 117 |
ROD ASSEMBLY-CONTROL, RIVETED TUBE, 1/2 O.D., ALUM. ALLOY, 1/4 ADJUSTABLE CLEVIS AND BEARING ENDS |
|
NAS 1179 |
OXYGEN MASK ASSEMBLY, PASSENGER |
|
NAS 118 |
ROD ASSEMBLY - CONTROL, RIVETED TUBE, 1/2 O.D., ALUMINUM ALLOY, 1/4 ADJUSTABLE BEARING ENDS |
|
NAS 119 |
RIVETED ASSEMBLY - TUBE, 1/2 O.D., ALUMINUM ALLOY, THREADED ROD ENDS |
|
NAS 1192 |
PERFORMANCE SPECIFICATION FOR HARD ANODIC COATINGS ON ALUMINUM ALLOYS |
|
NAS 1196 |
RECEPTACLE DUMMY STOWAGE, ELECTRICAL CONNECTOR |
|
NAS 120 |
KNOB CONTROL 3/4 SPHERICAL |
|
NAS 121 |
KNOB-CONTROL, 1 INCH SPHERICAL |
|
NAS 1211 |
FITTINGS, TIE DOWN STRAP END |
|
NAS 1213 |
STRAP ASSSEMBLY - TIE DOWN BUCKLE |
|
NAS 1214 |
FITTING END - STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTIONS AND GASKET SEAL |
|
NAS 1215 |
FITTING END - STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS |
|
NAS 122 |
KNOB - CONTROL, 1-1/4 SPHERICAL, PLASTIC |
|
NAS 123 |
KNOB - CONTROL, 1 INCH DIAMETER X 5/8 OVAL, PLASTIC |
|
NAS 1237 |
ELBOW - UNIVERSAL 90 DEG - FLARELESS |
|
NAS 1238 |
ELBOW - UNIVERSAL 75 DEG - FLARELESS |
|
NAS 1239 |
ELBOW - UNIVERSAL 45 DEG - FLARELESS |
|
NAS 124 |
KNOB - CONTROL, 1 1/4 DIAMETER X 13/16 HORIZONTAL SEMI-ROUND PLASTIC |
|
NAS 125 |
KNOB - CONTROL, 1 1/8 DIAMETER X 1 3/16 ANGULAR SEMI - ROUND, PLASTIC |
|
NAS 126 |
KNOB, 1 1/8 CUBICAL PLASTIC |
|
NAS 127 |
BUTTON-1/2 DI, LUMINOUS LETTER |
|
NAS 128 |
FILLER - KNOB LEVER SLOT |
|
NAS 1282 |
HOOK SNAP, BOLT |
|
NAS 1284 |
BUCKLE-WEB STRAP, LIGHT DUTY |
|
NAS 1285 |
SAFETY HOOK |
|
NAS 1286 |
CONNECTING LINK |
|
NAS 1289 |
THREADED SHEAR FASTENER, FLUSH AND PROTRUDING TYPE FOR APPLICATIONS UP TO 900 DEGREES F MAXIMUM - 5% CR ULTRA HIGH STRENGTH ALLOY STEEL (H-11) - PROCUREMENT SPECIFICATION |
|
NAS 129 |
DATA - STD. KNOB, ENGINEERING REFERENCE |
|
NAS 1290 |
PROCUREMENT SPECIFICATION, THREADED SHEAR FASTENER, FLUSH AND PROTRUDING TYPE FOR APPLICATIONS UP TO 1400 F. CORROSION AND HEAT RESISTANT RENE' 41 NICKEL BASE ALLOY |
|
NAS 1292-1296 |
PIN - THREADED SHEAR 100 DEG CSK HEAD |
|
NAS 1302 |
IDENTIFICATION - EQUIPMENT AND COMPONENT WIRE TERMINATION |
|
NAS 1322-1326 |
PIN - THREADED SHEAR PROTRUDING HEAD |
|
NAS 1327 |
SPACER, THRU-HOLE, SPLINE |
|
NAS 1331 |
CART, UTILITY EQUIPMENT |
|
NAS 1350 |
EQUIPMENT IDENTIFICATION NAMEPLATE & MARKING |
|
NAS 1367 |
FITTINGS - COATED LUBRICANT AND SEALANT |
|
NAS 1369 |
DUCT, AIR, FLEXIBLE AND SEMI-RIGID |
|
NAS 1370-1379 |
DUCT-AIR, FLEXIBLE, HELIX WIRE SUPPORTED |
|
NAS 1380 |
STUD, WELDING, INTERNALLY THREADED |
|
NAS 1381 |
STUD, WELDING, EXTERNALLY THREADED |
|
NAS 1386 |
EYELET, METALLIC, ELECTRICAL, FUNNEL |
|
NAS 1388 |
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, PRE-INSULATED, (CLASS 2) WIRE SIZES 10 TO 26 |
|
NAS 1389 |
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, PRE-INSULATED (CLASS 2) WIRE SIZES 8 TO 1/10 |
|
NAS 1390 |
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, MOISTURE RESISTANT (CLASS 2) |
|
NAS 1391 |
WIRE, ELECTRICAL, INSULATED COPPER SOLID CONDUCTOR HOOK-UP AND GENERAL PURPOSE (FOR 105 DEG C SERVICE) |
|
NAS 1396 |
CHAIN-WELDED TWIST LINK,SHORT LINK PATTERN |
|
NAS 1410 |
NUT, UNIVERSAL PORT FITTING |
|
NAS 1411 |
BAND, MARKER, BLANK |
|
NAS 1412 |
GASKET, SEALING, CUSTOM DESIGN |
|
NAS 1413 |
PINS AND COLLARS, SWAGE LOCKING |
|
NAS 1414-1422 |
PIN, SWAGE LOCKING, STEEL, 100 DEG SHEAR HEAD, STUMP-TYPE |
|
NAS 1424-1432 |
PIN, SWAGE LOCKING, STEEL, PROTRUDING HEAD, SHEAR, STUMP-TYPE |
|
NAS 1433 |
RADIOGRAPHIC STANDARDS FOR ALUMINIUM ALLOY CASTINGS |
|
NAS 1434 |
RADIOGRAPHIC STANDARDS FOR MAGNESIUM ALLOY CASTINGS |
|
NAS 1436-1442 |
PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, 100 DEG SHEAR HEAD, PULL-TYPE |
|
NAS 1443 |
LOCKWASHER-BEARING, RETAINING |
|
NAS 1446-1452 |
PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, PROTUDING HEAD, SHEAR, PULL-TYPE |
|
NAS 1453 |
EYELET, METALLIC, ELECTRICAL, PRINTED CIRCUIT BOARD, FUNNEL TYPE |
|
NAS 1454 |
ROD, CONTINUOUS THREAD |
|
NAS 1456-1462 |
PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, 100 DEG HEAD (MS24694), TENSION, PULL-TYPE |
|
NAS 1493 |
LOCKNUT BEARING RETAINING |
|
NAS 1494 |
TERMINAL, LUG-SINGLE HOLE TONGUE, SINGLE BARREL, PRESSURE GRIP TYPE |
|
NAS 1495 |
RECOMMENDED QUALIFICATION TEST PROCEDURE FOR COMPLIANCE WITH NAS SPECIFICATIONS AND STANDARD DRAWINGS |
|
NAS 1496-1502 |
PIN, SWAGE LOCKING, STEEL, PROTRUDING HEAD, TENSION, STUMP-TYPE |
|
NAS 1516-1522 |
PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100 DEG HEAD (MS 24694), TENSION, PULL-TYPE |
|
NAS 1524 |
STANDARDIZATION SAVINGS, IDENTIFICATION AND CALCULATION |
|
NAS 1525-1532 |
PIN, SWAGE LOCKING, ALUMINUM ALLOY, PROTRUDING HEAD, TENSION, PULL-TYPE |
|
NAS 1535-1542 |
PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100 DEG HEAD (MS 20426), TENSION, PULL-TYPE |
|
NAS 1546-1552 |
PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100 DEG HEAD (MS 24694), TENSION, STUMP-TYPE |
|
NAS 1553 |
KNOB, HAND, GROUND SUPPORT EQUIPMENT |
|
NAS 1555-1562 |
PIN, SWAGE LOCKING, ALUMINUM ALLOY, PROTRUDING HEAD, TENSION, STUMP-TYPE |
|
NAS 1565 |
REDUCER, FLARELESS TUBE |
|
NAS 1566 |
REDUCER ASSEMBLY, FLARELESS TUBE |
|
NAS 1575 |
SWITCH FITTING BOX, WEATHERPROOF |
|
NAS 1590 |
PIN, HI-SHEAR RIVET, 1200 DEG F |
|
NAS 1594 |
PACKING, PREFORMED-MIL-R-25897 RUBBER, 90 SHORE, O-RING |
|
NAS 1637 |
HANDLE, LATCHING INTERNAL AND EXTERNAL RELEASE COMPONENTS AND ASSEMBLY |
|
NAS 1645 |
INSERT ARRANGEMENTS ELECTRICAL CONNECTOR, SHELL SIZE 12 |
|
NAS 1688 |
HOSE ASSEMBLY, TETRAFLUOROETHYLENE. HIGH TEMPERATURE, MEDIUM PRESSURE, FLARED |
|
NAS 1689 |
HOSE ASSEMBLY, TETRAFLUOROETHYLENE. HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS |
|
NAS 1690 |
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE. HIGH TEMPERATURE, HIGH PRESSURE, FLARED |
|
NAS 1691 |
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE. HIGH TEMPERATURE, HIGH PRESSURE, FLARELESS |
|
NAS 1717 |
RELIABILITY DEMONSTRATION OF LIQUID PROPELLANT ROCKET ENGINES |
|
NAS 1718 |
RELIABILITY DEMONSTRATION OF SOLID PROPELLANT ROCKET MOTORS |
|
NAS 1737 |
INSTALLATION TORQUE LIMITS FOR 160 KSI THREADED FASTENER SYSTEMS SUBJECT TO PERIODIC REMOVAL |
|
NAS 1761 |
ELBOW, REDUCER, 45 DEG, FLARELESS TUBE TO SWIVEL |
|
NAS 1762 |
ELBOW REDUCER, 90 DEG, FLARELESS TUBE TO SWIVEL |
|
NAS 1763 |
TEE, REDUCER, FLARELESS TUBE TO SWIVEL SWIVEL ON RUN |
|
NAS 1764 |
TEE, REDUCER, FLARELESS TUBE TO SWIVEL SWIVEL ON SIDE |
|
NAS 1798 |
BIT, SIX LOBE DRIVE - INTERNAL RECESS - FOR POWER AND HAND TOOLS |
|
NAS 1799 |
BIT, SIX RECESS DRIVER, SPECIFICATION |
|
NAS 183 |
STUD-COARSE THREAD |
|
NAS 1837 |
INSTALLATION TAB AND ALIGNMENT TOOL FOR NAS 1832, NAS 1833, NAS 1834, NAS 1835, AND NAS 1836 MOLDED IN INSERTS |
|
NAS 184 |
STUD-FINE THREAD |
|
NAS 186 |
SPACER, STEPPED, SWAGE TYPE |
|
NAS 1860-1863 |
STUD ASSEMBLY-THREADED METAL SINGLE STEP |
|
NAS 1923 |
CLAMP, HOSE, BAND, TANGENTIAL WORM, LIGHT WEIGHT |
|
NAS 1924 |
CLAMP, HOSE |
|
NAS 1925 |
CLAMP, HOSE |
|
NAS 1930 |
RING, RETAINING |
|
NAS 1941 |
RUBBER, SYNTHETIC, CABLE GROMMET MATERIAL |
|
NAS 198 |
KNOB-CONTROL 1.25 SPHER., PLASTIC |
|
NAS 2013 |
COLLAR, GROOVED, PIN-RIVET, TITANIUM (COMPOSITE APPLICATIONS) |
|
NAS 2205-2212 |
BOLT-LOCK, TENSION, PROTRUDING HEAD, STUMP-TYPE, TITANIUM ALLOY |
|
NAS 2306-2312 |
BOLT-LOCK, TENSION, 100 DEG HEAD (MS24694), STUMP-TYPE, TITANIUM ALLOY |
|
NAS 24 |
TERMINAL-TANK STRAP, FORKED |
|
NAS 25 |
TRUNNION-TANK STRAP, THREADED |
|
NAS 27 |
TURNBUCKLE-TANK STRAP |
|
NAS 287 |
TERMINAL-CHAIN TO CABLE (FOR SWAGING) |
|
NAS 322-330 |
CABLE ASSEMBLY SWAGED TYPE - TYPE II TERMINALS |
|
NAS 332 |
BEARING RETENTION SLEEVE, GROOVED OUTER FACE |
|
NAS 3351 |
STUD AND MANDREL TEST FIXTURE SELF-LOCKING NUTS |
|
NAS 3352 |
FIXTURE-STRESS EMBRITTLEMENT TEST SELF-LOCKING NUTS |
|
NAS 3353 |
FIXTURE-BEARING SURFACE SQUARENESS TEST-SELF-LOCKING NUTS |
|
NAS 3355 |
FIXTURE-TENSILE YIELD TEST - SELF-LOCKING NUTS |
|
NAS 3356 |
LUBRICANT COATINGS, SUITABILITY OF SELF-LOCKING NUTS |
|
NAS 3400 |
VOLATILE CORROSION INHIBITOR |
|
NAS 3401 |
WRAP, WITH STIFFENER |
|
NAS 3404 |
BAG, TRANSPARENT, INDIVIDUAL BOX |
|
NAS 3405 |
BAG, TRANSPARENT, SINGLE ITEM, WITH ACCESSORIES |
|
NAS 3406 |
BAG, PACKAGING OF MULTIPLE ITEMS |
|
NAS 3407 |
BAG, WATER VAPORPROOF |
|
NAS 3408 |
BOX, UNIT, CUSHIONED |
|
NAS 3409 |
BOX, PLASTIC, CUSHIONED |
|
NAS 3410 |
BOX, BULK QUANTITIES |
|
NAS 3411 |
BOX, SLOTTED PARTITIONS |
|
NAS 3412 |
SPOOL, PACKAGING OF |
|
NAS 3413 |
TUBE, MAILING |
|
NAS 3414 |
PACKAGE, MULTIPLE, AXIAL LEAD COMPONENTS FOR AUTOMATIC EQUIPMENT |
|
NAS 3415 |
BAG, WITH STIFFENER |
|
NAS 3416 |
BOX, WITH FIBERBOARD STIFFENERS |
|
NAS 3417 |
PACKAGING OF ELECTRICAL CABLE-CORD-WIRE |
|
NAS 3418 |
BAG, OPAQUE, SINGLE ITEM |
|
NAS 3419 |
BOX, WITH DIE-CUT PADS/FILLERS |
|
NAS 3420 |
CONTAINERS, WEATER-VAPORPROOF, W/DESICCANT |
|
NAS 3421 |
WRAP, GREASEPROOF, W/PRESERVATIVE |
|
NAS 3422 |
WRAP, GREASEPROOF W/PRESERVATIVE, INDIVIDUAL BOX |
|
NAS 3423 |
CONTOURED ITEMS, PACKAGING OF WAVEGUIDES ETC. |
|
NAS 3424 |
HOSE, HOSE ASSEMBLIES, PACKAGING OF |
|
NAS 3425 |
BAG, ANTI-STATIC |
|
NAS 3427 |
MULTIPLE LEAD DEVICES, INDIVIDUAL PACKAGING OF |
|
NAS 3428 |
KIT, PACKAGING OF |
|
NAS 3429 |
AXIAL/RADIAL LEAD COMPONENTS, INDIVIDUAL PACKAGING OF |
|
NAS 3430 |
AXIAL/RADIAL LEAD COMPONENTS, MULTIPLE PACKAGING OF |
|
NAS 3431 |
BAG, INDIVIDUAL ITEM CAPPED, WITH OR WITHOUT ACCESSORIES |
|
NAS 3432 |
SILVER TARNISH INHIBITOR |
|
NAS 3433 |
CLOSE TOLERANCE CYLINDRICAL HARDWARE ITEMS, PACKAGING OF |
|
NAS 3434 |
PRECISION MACHINED ITEMS, PACKAGING OF |
|
NAS 3437 |
WRAP, SINGLE FACE CORRUGATED PAPER |
|
NAS 3438 |
VIAL, PLASTIC |
|
NAS 3439 |
BOX, MULTIPLE QUANTITIES, TIGHTLY PACKED |
|
NAS 3440 |
PACKAGE, MULTIPLE CAVITY |
|
NAS 3441 |
BAG, CUSHIONED |
|
NAS 3442 |
BOX, INTERLEAVE, MULTIPLE ITEMS |
|
NAS 3443 |
BOX, FOAM CUSHIONING CONVOLUTED |
|
NAS 3444 |
BOX, W/DESICCANT, BAG WATER-VAPORPROOF, BOX |
|
NAS 3445 |
SKIN PACKAGING |
|
NAS 3446 |
TUBE, FIBER/PAPERBOARD, SPIRAL WOUND |
|
NAS 3447 |
PRECISION CLEANED ITEMS, CONTAMINATION BARRIER FOR |
|
NAS 3448 |
OPTICAL COMPONENTS, PACKAGING OF |
|
NAS 3449 |
HOSES/TUBES, PREFORMED OR STRAIGHT, MULTIPLE PACKAGING OF |
|
NAS 3450 |
UNCASED DEVICES(SILICON MONOLITHIC) |
|
NAS 3451 |
CASTINGS, PACKAGING OF |
|
NAS 3454 |
REUSABLE SHIPPING CONTAINERS |
|
NAS 355 |
TUBE ASSEMBLY-CONTROL; ALUMINUM ALLOY WITH REVETED THREADED ROD ENDS |
|
NAS 356 |
TUBE ASSEMBLY-CONTROL, ALUMINUM ALLOY WITH RIVETED CLEVIS AND THREADED ROD ENDS |
|
NAS 357 |
TUBE - CONTROL ALUMINUM ALLOY |
|
NAS 358 |
TUBE ASSEMBLY - CONTROL STEEL WITH WELDED THREADED ROD-ENDS |
|
NAS 359 |
TUBE ASSEMBLY - CONTROL STEEL WITH WELDED CLEVIS AND THREADED ROD ENDS. |
|
NAS 360 |
TUBE-CONTROL STEEL |
|
NAS 3601 |
RECOMMENDED STANDARD DATA FORMAT OF TRANSPORT AIRPLANE CHARACTERISTICS FOR AIRPORT PLANNING |
|
NAS 3602 |
CONTRACTOR FLIGHT DEVELOPMENT |
|
NAS 3620 |
PROPELLANTS, NITROGEN TETROXIDE |
|
NAS 397 |
CLAMP-RATCHET, ONE PIECE |
|
NAS 4007 |
TESTING - METALLURGICAL, FASTENERS, EXTERNAL THREADS |
|
NAS 403 |
PLUG AND RECEPTACLE - FUEL NOZZLE GROUNDING DESIGN AND INSTALLATION OF (FOR AIRCRAFT) |
|
NAS 41 |
PIN, CONTINUOUS HINGE |
|
NAS 4117 |
HEAT SINK-INSULATOR, WAFER TYPE |
|
NAS 4118 |
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, RETAINER CLIP TYPE |
|
NAS 4119 |
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, PRESS-ON TYPE |
|
NAS 4120 |
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, ENCAPSULATING TYPE, TO-5 |
|
NAS 4121 |
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, FORMED |
|
NAS 4122 |
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, EXTRUDED |
|
NAS 4123 |
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES,FOR DUAL INLINE PACKAGES (DIP) |
|
NAS 4124 |
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, DUAL LINK |
|
NAS 4160 |
PLATING, CADMIUM (ELECTRODEPOSITED), FOR FASTENERS |
|
NAS 424 |
COUPLING - TUBE FLARED FITTING, FEMALE THREAD |
|
NAS 427 |
PIN-PULLEY GUARD |
|
NAS 44 |
BUSBAR - ELECTRICAL |
|
NAS 4450 |
PIN, CRIMP-PROTRUDING SHEAR HEAD |
|
NAS 4452 |
PIN, CRIMP - 100 DEG FLUSH SHEAR HEAD |
|
NAS 4458 |
PIN, CRIMP, PROTRUDING TENSION HEAD |
|
NAS 4466 |
PIN, CRIMP, 100 DEG SHEAR/TENSION HEAD |
|
NAS 474 |
BRACKET - ANGLE SPEED NUT |
|
NAS 518 |
GAGE-100 DEGREES FLAT HEAD FLUSHNESS |
|
NAS 520 |
COUPLING-FLEXIBLE, LOW PRESSURE, 450 DEG AIR LINE |
|
NAS 521 |
COUPLING-FLEXIBLE, LOW PRESSURE, 250 DEG AIR LINE |
|
NAS 522 |
COUPLING-FLEXIBLE, LOW PRESSURE AIR LINE |
|
NAS 531 |
CHARTS-ROCKWELL HARDNESS |
|
NAS 539 |
KNOB ASSEMBLY, TRANSILLUMINATED POINTER |
|
NAS 540 |
INVOLUTE SPLINES 45 DEGREE PRESSURE ANGLE, LOOSE FIT |
|
NAS 544 |
SWITCH-ONE HOLE MOUNTING DOUBLE POLE TOGGLE |
|
NAS 546 |
RING-LOCKING |
|
NAS 550 |
FITTING, INSTALLATION OF UNIVERSAL ELBOW |
|
NAS 551 |
BOLT - UNIVERSAL FITTING |
|
NAS 552 |
ELBOW-UNIVERSAL 90 DEGREES |
|
NAS 553 |
ELBOW-UNIVERSAL 15 DEGREES |
|
NAS 554 |
ELBOW-UNIVERSAL 45 DEGREE |
|
NAS 555 |
TEE-UNIVERSAL |
|
NAS 558 |
KEYS-SQUARE AND RECTANGULAR |
|
NAS 562 |
CAM FOLLOWER NEEDLE BEARING, HIGH STRENGTH STUD |
|
NAS 574 |
PIN, REAR MOUNTING - ELECTRONIC EQUIPMENT |
|
NAS 576 |
THREAD LENGTH FOR SELF-LOCKING NUTS |
|
NAS 579 |
INVOLUTE SPLINE 30 DEGREE FULL FILLET |
|
NAS 580 |
INVOLUTE SPLINE-HOLE(30 DEGREE FULL FILLET) |
|
NAS 591 |
COUPLING - RIGID TUBE CONNECTOR, ALUMINUM |
|
NAS 592 |
RING - RIGID TUBE CONNECTOR, ALUMINUM |
|
NAS 593 |
NUT - RIGID TUBE CONNECTOR, ALUMINUM |
|
NAS 596 |
NUT-RIGID TUBE CONNECTOR, CORROSION RESISTANT STEEL |
|
NAS 597 |
FITTINGS-RIGID TUBE CONNECTOR,FLARED TUBE |
|
NAS 607 |
PIN, STRAIGHT, HEADLESS-(DOWEL) |
|
NAS 61 |
SPACER, SLEEVE, NONMETALLIC, POLYAMIDE (NYLON), SCREW AND BOLT |
|
NAS 617 |
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, SYNTHETIC LUBRICANT RESISTANT |
|
NAS 652 |
COUPLING-RIGID TUBE BULKHEAD CONNECTOR |
|
NAS 659 |
BEARING-ROD END, EXTERNAL THREAD, SELF-ALIGNING ANTI-FRICTION |
|
NAS 660 |
BEARING - ROD END, PLAIN SHANK, SELF ALIGNING, ANTI-FRICTION |
|
NAS 661 |
BEARINGS, BALL AND ROLLER, ROD END, ANTI-FRICTION, AIRFRAME |
|
NAS 672 |
PLATING, HIGH STRENGTH STEELS, CADMIUM |
|
NAS 68 |
GUIDE-FASTENER,COWL DZUS TYPE |
|
NAS 6913 |
PIN, SWAGE LOCKING, PH13-8MO CRES, 100 DEG CROWN HEAD, SHEAR, PULL-TYPE |
|
NAS 6914 |
PIN, SWAGE LOCKING, PH13-8MO CRES, PROTRUDING HEAD, SHEAR, PULL- TYPE |
|
NAS 6915-6922 |
PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100 DEG HEAD (MS20426), TENSION, STUMP-STYLE |
|
NAS 6925-6932 |
PIN, SWAGE LOCKING, STEEL, 100 DEG HEAD (MS 20426), TENSION, STUMP-TYPE |
|
NAS 6935-6942 |
PIN, SWAGE LOCKING, STEEL, 100 DEG CROWN HEAD, TENSION, PULL-TYPE |
|
NAS 6946-6952 |
PIN, SWAGE LOCKING, A286 CRES, 100 DEG HEAD (MS24694), TENSION, PULL-TYPE |
|
NAS 6955-6962 |
PIN, SWAGE LOCKING, A286 CRES, 100 DEG HEAD (MS20426), TENSION, PULL-TYPE |
|
NAS 6974-6982 |
PIN, SEWAGE LOCKING, A286 CRES, 100 DEG SHEAR HEAD, STUMP-TYPE |
|
NAS 6984-6992 |
PIN, SEWAGE LOCKING, A286 CRES, PROTRUDING HEAD, SHEAR, STUMP-TYPE |
|
NAS 7004-7012 |
PIN, SWAGE LOCKING, A286 CRES, 100 DEG SHEAR/TENSION HEAD, PULL-TYPE |
|
NAS 7014-7022 |
PIN, SWAGE LOCKING, A286 CRES, PROTRUDING HEAD, SHEAR/TENSION, PULL-TYPE |
|
NAS 7024-7032 |
PIN, SWAGE LOCKING, 108 KSI STEEL, 100 DEG SHEAR/TENSION HEAD, PULL-TYPE |
|
NAS 7034-7042 |
PIN, SWAGE LOCKING, 108 KSI STEEL, PROTRUDING HEAD, SHEAR/TENSION, PULL-TYPE |
|
NAS 7100 |
RECESS, RIBBED CRUCIFORM DIMENSIONS OF RECESS AND GAGES |
|
NAS 7101 |
BIT, SCREWDRIVER, CRUCIFORM SPECIFICATION FOR |
|
NAS 714 |
CONNECTOR, ELECTRICAL, FEMALE FOR USE WITH PRINTED WIRING |
|
NAS 715 |
CONNECTOR, ELECTRICAL, MALE FOR USE WITH PRINTED WIRING |
|
NAS 72 |
BUSHING - CLAMP - UP, STEEL, CHROME PLATED |
|
NAS 727 |
GEAR - SPUR, 20 DEGREES, INVOLUTE, LOW INERTIA, 48 AND FINER PITCH |
|
NAS 78 |
FITTING, SELF-SEALING, QUICK DISCONNECT TUBING |
|
NAS 807 |
SPECIFICATION - TWIN SEAPLANE FLOATS |
|
NAS 808 |
SPECIFICATION - AIRCRAFT SKIS |
|
NAS 809 |
SPECIFICATION - AIRCRAFT SEATS AND BERTHS |
|
NAS 814 |
CAP-PROTECTIVE,FLARED FITTING |
|
NAS 817 |
CAR-PROTECTIVE,FLARED FITTING |
|
NAS 820 |
PLUG-PROTECTIVE,ELECTRICAL CONNECTOR |
|
NAS 821 |
INSPECTION REQUIREMENTS FOR TITANIUM ALLOY SHEET |
|
NAS 822 |
QUANTITY INDICATORS & CONTROLS-FUEL,PERSONAL ARCRF |
|
NAS 824 |
INSPECTION,ULTRASONIC,WROUGHT METAL |
|
NAS 8500-8506 |
BIT, SCREWDRIVER CRUCIFORM RECESS |
|
NAS 851 |
GENERAL PACKAGING STANDARD INDEXES |
|
NAS 852 |
QUALITY ASSURANCE,GENERAL GUIDANCE |
|
NAS 853 |
FIELD FORCE, PROTECTION FROM |
|
NAS 854 |
HAZARDOUS MATERIAL PACKAGING AND SAFETY DATA SHEET PREPARATION |
|
NAS 875 |
ROBOT - INDUSTRIAL, CNC, FOR DRILLING, REAMING AND COUNTERSINKING |
|
NAS 876 |
ALIGNMENT LASERS FOR OPTICAL TOOLING |
|
NAS 877 |
ANGULAR TARGETS, SOLID, OPTICAL TOOLING 2-1/4 AND 1-1/2 OUTSIDE DIAMETERS |
|
NAS 878 |
MOUNT-OPTICAL TOOLING 3-1/2-8 THREAD |
|
NAS 879 |
ADAPTER-OPTICAL TOOLING 3-1/2-8 TO 5/8-11 THREAD |
|
NAS 880 |
INTERFACE-OPTICAL TOOLING ELECTRONIC LEVEL |
|
NAS 881 |
INDEX BAR-OPTICAL TOOLING TOOLING BAR SYSTEM |
|
NAS 882 |
BAR-OPTICAL TOOLING TOOLING BAR SYSTEM |
|
NAS 883 |
MIRROR TARGETS-OPTICAL TOOLING FRONT SURFACE AND PLANO-PARALLEL |
|
NAS 884 |
INTERFACE-OPTICAL TOOLING NON-ALIGNMENT LASER HEAD |
|
NAS 885 |
SCALES FOR OPTICAL TOOLING |
|
NAS 886 |
JIG TRANSIT & JIG TRANSIT SQUARES FOR OPTICAL TOOLING |
|
NAS 887 |
THEODOLITES FOR OPTICAL TOOLING |
|
NAS 888 |
SIGHT LEVELS FOR OPTICAL TOOLING |
|
NAS 889 |
OPTICAL SQUARES FOR OPTICAL TOOLING |
|
NAS 899 |
WIRE HARNESS ASSEMBLY MACHINE, COMPUTERIZED NUMERICAL CONTROL |
|
NAS 900 |
MOUNT-OPTICAL TOOLING SPHERICAL 2.2500 INSIDE BORE |
|
NAS 901 |
TELESCOPES AND COLLIMATORS FOR OPTICAL TOOLING |
|
NAS 902 |
LINEAR TARGETS, SEE-THRU, OPTICAL TOOLING 2-1/4 AND 1-1/2 OUTSIDE DIAMETERS |
|
NAS 903 |
SPHERICAL MOUNT ADAPTERS - OPTICAL TOOLING 2-1/4 AND 1-1/2 DIAMETER TARGETS |
|
NAS 904 |
BASE-OPTICAL TOOLING SPHERICAL CUP MOUNT |
|
NAS 906 |
LINEAR TARGETS, SOLID, OPTICAL TOOLING 2-1/4 AND 1-1/2 OUTSIDE DIAMETERS |
|
NAS 908 |
GLOSSARY OF OPTICAL TOOLING TERMS |
|
NAS 909 |
MILLING MACHINES - GENERAL PURPOSE, KNEE AND BED TYPES, HORIZONTAL AND VERTICAL |
|
NAS 910 |
HORIZONTAL BORING, DRILLING AND MILLING MACHINE |
|
NAS 911 |
MILLING MACHINE - NUMERICALLY CONTROLLED SKIN/PROFILE |
|
NAS 912 |
SPAR MILL NUMERICALLY CONTROLLED |
|
NAS 914 |
MILLING MACHINE - TRACER CONTROLLED PROFILING AND CONTOURING-VERTICAL |
|
NAS 929 |
PERFORMANCE REQUIREMENT - WORK HOLDER AIRFRAME SPAR MILLING MACHINE |
|
NAS 930 |
STRETCH FORMING MACHINES-AIRFRAMES |
|
NAS 931 |
SPECIFICATION FOR DUAL TURNING MACHINES |
|
NAS 932 |
DRILLS-THREADED HEXAGONAL SHANK SIZES #40 THRU LETTER 'F' |
|
NAS 936 |
MILLING MACHINE - PRECISION BED-TYPE HORIZONTAL AND VERTICAL SPINDLES |
|
NAS 938 |
MACHINE AXIS AND MOTION NOMENCLATURE |
|
NAS 939 |
PRESS HYDRAULIC, TYPE I SINGLE ACTION RAM WITH DIE CUSHION |
|
NAS 940 |
PRESS-HYDRAULIC DIRECT ACTING INTERNAL EXPANSION |
|
NAS 941 |
IDENTIFICATION MARKING OF TITANIUM SHEET |
|
NAS 942 |
STRAIN-GAGES, BONDED RESISTANCE |
|
NAS 944 |
SYMBOLS, HYDRAULIC TEST EQUIPMENT DRAFTING |
|
NAS 945 |
CAP-PROTECTIVE,NAS 591 COUPLING |
|
NAS 947 |
CAP-PROTECTIVE, BEADED TUBE ASSEMBLY |
|
NAS 949 |
TUBE BENDER - PRECISION - THIN WALL AIRCRAFT TYPE |
|
NAS 950 |
GASKET, DUMMY STOWAGE RECEPTACLE, ELECTRICAL |
|
NAS 951 |
MACHINE - ELECTRICAL WIRE PROCESSING, NUMERICALLY CONTROLLED |
|
NAS 953 |
NUMERICAL CONTROL SYSTEM |
|
NAS 954 |
NUMERICALLY CONTROLLED HORIZONTAL BORING, DRILLING AND MILLING MACHINE |
|
NAS 955 |
INTERCHANGEABLE PERFORATED TAPE STANDARDS VARIABLE BLOCK FORMAT, FOR NUMERICALLY CONTROLLED EQUIPMENT |
|
NAS 956 |
TUBE BENDER - NUMERICAL CONTROL, PRECISION AIRCRAFT TYPE FOR THIN WALL, FERROUS AND NONFERROUS ALLOYS. |
|
NAS 957 |
NUMERICALLY CONTROLLED DRAFTING LINE PLOTTER |
|
NAS 958 |
SHEAR FORMING EQUIPMENT - HORIZONTAL AND VERTICAL |
|
NAS 959 |
MANUAL GAS METAL ARC(GMA)WELDING EQUIPMENT |
|
NAS 960 |
DRILLING MACHINES, NUMERICALLY CONTROLLED |
|
NAS 961 |
MANUAL GAS TUNGSTEN ARC(GTA)FUSION WELDING EQUIPMENT |
|
NAS 962 |
MACHINE GAS TUNGSTEN ARC FUSION WELDING EQUIPMENT |
|
NAS 963 |
COMPUTER NUMERICALLY CONTROLLED VERTICAL AND HORIZONTAL JIB BORERS |
|
NAS 964 |
MACHINE GAS METAL ARC FUSION WELDING EQUIPMENT |
|
NAS 966 |
LATHE, PRECISION - NUMERICALLY CONTROLLED |
|
NAS 967 |
RESISTANCE SPOT WELDING EQUIPMENT 3 PHASE |
|
NAS 970 |
TOOL HOLDERS-BASIC FOR NUMERICALLY CONTROLLED MACHINE TOOLS |
|
NAS 972 |
GLOSSARY OF MANUFACTURING EQUIPMENT TERMS |
|
NAS 973 |
TOOL AND CUTTER GRINDING MACHINE |
|
NAS 974 |
ELECTRICAL HARNESS ASSEMBLING MACHINE, NUMERICALLY CONTROLLED |
|
NAS 975 |
COMPONENT LEAD CUTTING AND FORMING EQUIPMENT ELECTRONIC PRINTED CIRCUIT BOARD |
|
NAS 976 |
ELECTRON BEAM WELDING MACHINE-HIGH VACUUM |
|
NAS 977 |
MILLING MACHINE, CONTOUR, NUMERICAL CONTROL, MULTIAXIS, TRAVELING GANTRY/TABLE, COMBINATION HIGH AND LOW SPEED |
|
NAS 981 |
GAS TUNGSTEN ARC(GTA)SPOT WELDING EQUIPMENT |
|
NAS 982 |
HOT FORMING, SIZING, AND STRAIGHTENING PRESS SPECIFICATION |
|
NAS 983 |
STANDARD FORMAT FOR NAS 900 SERIES EQUIPMENT SPECIFICATIONS |
|
NAS 984 |
NUMERICALLY CONTROLLED MILLING MACHINES KNEE AND BED TYPE - HORIZONTAL AND VERTICAL |
|
NAS 987 |
TOOLHOLDER, NOSE CONFIGURATION - MACHINE TOOLS |
|
NAS 989 |
DISCOUNTED CASH FLOW MODEL |
|
NAS 990 |
COMPOSITE FILAMENT TAPE LAYING MACHINE - NUMERICALLY CONTROLLED |
|
NAS 991 |
RESISTANCE SEAM AND ROLL SPOT WELDING EQUIPMENT 3 PHASE |
|
NAS 993 |
DIRECT NUMERICAL CONTROL SYSTEM |
|
NAS 994 |
ADAPTIVE CONTROL SYSTEM FOR NUMERICALLY CONTROLLED MILLING MACHINES |
|
NAS 995 |
SPECIFICATION FOR COMPUTERIZED NUMERICAL CONTROL (CNC) |
|
NAS 996 |
INDUCTION TUBE BRAZING EQUIPMENT |
|
NAS 998 |
GRINDER - END MILL, NUMERICALLY CONTROLLED |
|
NAS 999 |
NONDESTRUCTIVE INSPECTION OF ADVANCED COMPOSITE STRUCTURES |
|
NAS METRIC SET |
COMPLETE SET OF METRIC STANDARDS *CONTAINS CURRENT & INACTIVE FOR NEW DESIGN - NA, NAS 10000 & NAMSTDS***ADD ON (1)NAS INDEX & (1)1"" WHITE BINDER @ N/C*** INCLUDES NAM 14290 & NAM 14289,CORRECTIONS FROM NASM MAILING 99-5&6 |
|
NAS SET |
COMPLETE SET OF STANDARDS- NAS & NASM *INCLUDES CURRENT & ""INACTIVE FOR NEW DESIGN"" NAS & NASM STDS* *ADD ON 11 GLOBAL BINDER 3"" WHITE & (1) GLOBAL BINDER 1 "" WHITE AT N/C* |
|
NASM1312-15 |
FASTENER TEST METHODS - METHOD 15 TORQUE - TENSION |
|
NASM1312-18 |
FASTENER TEST METHODS - METHODS 18 ELEVATED TEMPERATURE TENSILE STRENGTH |
|
NASM1312-19 |
FASTENER TEST METHODS - METHOD 19 FASTENER SEALING |
|
NASM1312-22 |
FASTENER TEST METHODS - METHOD 22 RECEPTACLE PUSH-OUT, PANEL FASTENERS |
|
NASM1312-23 |
FASTENER TEST METHODS - METHODS 23 TENSILE STRENGTH OF PANEL FASTENERS |
|
NASM1312-24 |
FASTENER TEST METHODS - METHOD 24 RECEPTACLE TORQUE-OUT, PANEL FASTENERS |
|
NASM1312-25 |
FASTENER TEST METHODS - METHOD 25 DRIVING RECESS TORQUE QUALITY CONFORMANCE TEST |
|
NASM1312-26 |
FASTENER TEST METHODS - METHOD 26 STRUCTUAL PANEL FASTENER LAP JOINT SHEAR |
|
NASM1312-27 |
FASTENER TEST METHODS - METHOD 27, PANEL FASTENER SHEET PULL-UP |
|
NASM1312-28 |
FASTENER TEST METHODS - METHOD 28, ELEVATED TEMPERATURE DOUBLE SHEAR |
|
NASM1312-29 |
FASTENER TEST METHODS - METHOD 29, MEASUREMENT TECHNIQUES FOR DETERMINING SHANK EXPANDING CHARACTERISTICS OF DEFORMABLE FASTENERS |
|
NASM1312-3 |
FASTENER TEST METHODS - METHOD 3 HUmidITY |
|
NASM1312-30 |
FASTENER TEST METHODS - METHODS 30, SHEET PULL-UP OF BLIND FASTENERS |
|
NASM1312-32 |
FASTENER TEST METHOD - METHOD 32, BARREL NUT TEST |
|
NASM1312-4 |
FASTENER TEST METHODS - METHOD 4 LAP JOINT SHEAR |
|
NASM14191 |
RECESS - OFFSET CRUCIFORM, RIBBED DIMENSIONS OF RECESS, GAGE AND DRIVER FOR |
|
NASM16187 |
STUD, CONTINUOUS THREAD-(BOLT-STUD), B16 ALLOY STEEL, HIGH TEMPERATURE SERVICE(875 -1000 F) |
|
NASM16610 |
PIN, TAPERED, PLAIN |
|
NASM17855 |
FASTENERS, SCREW THREADED, DESCRIPTIVE FACTOR SYMBOLS AND ORDER OFNOTES FOR ENGINEERING DOCUMENTS FOR |
|
NASM17985 |
PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, ""T"" HANDLE |
|
NASM17986 |
PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, ""L"" HANDLE |
|
NASM17988 |
PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, ""T"" HANDLE |
|
NASM17990 |
PIN, QUICK RELEASE, POSITIVE LOCKING, DOUBLE ACTING, RING HANDLE |
|
NASM20065 |
KEY, MACHINE-RECTANGULAR IN CROSS SECTION, BOTH ENDS SQUARE |
|
NASM20067 |
KEY, MACHINE-SQUARE IN CROSS SECTION, ONE END SQUARE, OTHER END ROUND |
|
NASM20068 |
KEY, MACHINE-SQUARE IN CROSS SECTION, BOTH ENDS ROUND |
|
NASM20700 |
PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE |
|
NASM21132 |
WRENCHING ELEMENT, EXTERNAL HEXAGON, FOR THREADED FASTENERS |
|
NASM21382 |
KNOB-ROUND, ILLUMINATED AND NON-ILLUMINATED, SMALL |
|
NASM21383 |
KNOB-RADIAL INDICATOR, ILLUMINATED AND NON-ILLUMINATED |
|
NASM21384 |
KNOB-POINTER, ILLUMINATED AND NON-ILLUMINATED |
|
NASM21385 |
KNOBS-TACTILE SERIES, ILLUMINATED AND NON-ILLUMINATED |
|
NASM21386 |
KNOBS-ROUND, CONCENTRIC, ILLUMINATED AND NON-ILLUMINATED |
|
NASM21387 |
KNOB-ROUND, ILLUMINATED AND NON-ILLUMINATED, SMALL |
|
NASM25049 |
KNOBS, CONTROL, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
|
NASM27545 |
KEY, WOODRUFF, ALLOY STEEL |
|
NASM28728 |
DIAL, CONTROL, MULTI-TURN COUNTERS, GENERAL SPECIFICATION FOR |
|
NASM28728/1 |
DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.81 DIAMETER |
|
NASM28728/2 |
DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.75 DIAMETER |
|
NASM28728/3 |
DIAL, CONTROL, MULTITURN COUNTERS, 10 - TURN COUNTER, CONCENTRIC (1.810 - INCH DIAMETER) |
|
NASM28728/4 |
DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.16 DIAMETER |
|
NASM28728/5 |
DIAL, CONTROL, MULTITURN COUNTERS, THREE DIGITS |
|
NASM28728/6 |
DIAL, CONTROL, MULTITURN COUNTERS, THREE DIGIT, ILLUMINATED AND NONILLUMINATED |
|
NASM28728/7 |
DIAL, CONTROL, MULTITURN COUNTERS, 100 - TURN COUNTERS, 4 - DIGIT |
|
NASM28728/8 |
DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, .88 DIAMETER |
|
NASM302 |
PIN-ESCUTCHEON |
|
NASM33547 |
PINS, SPRING, FUNCTIONAL LIMITATIONS OF |
|
NASM33781 |
RECESS - OFFSET CRUCIFORM, DIMENSIONS OF RECESS, GAGE AND DRIVER FOR |
|
NASM35671 |
PIN, GROOVED, HEADLESS-LONGITUDINAL TAPER GROOVE, CARBON STEEL |
|
NASM35672 |
PIN, GROOVED, HEADLESS-LONGITUDINAL TAPER GROOVE, CORROSION-RESISTING STEEL |
|
NASM35674 |
PIN, GROOVED, HEADLESS-LONGITUDINAL STRAIGHT GROOVE, CARBON STEEL |
|
NASM35677 |
PIN, GROOVED, HEADLESS-LONGITUDINAL CENTER GROOVE, CARBON STEEL |
|
NASM35678 |
PIN, GROOVED, HEADLESS-LONGITUDINAL CENTER GROOVE, CORROSION- RESISTING STEEL |
|
NASM386 |
PIN, THREADED TAPER |
|
NASM39086 |
PIN, SPRING-TUBULAR, COILED, HEAVY DUTY |
|
NASM3926 |
KNOBS, CONTROL (FOR USE WITH ELECTRONIC, COMMUNICATIONS, AND ALLIED EQUIPMENT) |
|
NASM3926/1 |
KNOB, CONTROL, BALL |
|
NASM3926/2 |
KNOB, CONTROL, OVAL TAPERED |
|
NASM3926/3 |
KNOB, CONTROL, TAPERED |
|
NASM3926/4 |
KNOBS, CONTROL, ROUND, EDGE LIGHTED AND NON-EDGE LIGHTED |
|
NASM45915 |
STUD, LOCKED IN-KEY LOCKED, GENERAL SPECIFICATION FOR |
|
NASM51605 |
PIN, GROOVED, HEADLESS (HALF LENGTH TAPER GROOVE) CORROSION- RESISTING STEEL |
|
NASM51833 |
STUD, LOCKED IN, KEY-LOCKED, LIGHTWEIGHT |
|
NASM51834 |
STUD, LOCKED IN, KEY-LOCKED, HEAVY DUTY |
|
NASM51838 |
PIN, STRAIGHT, STEEL-DRILL ROD |
|
NASM51864 |
STUD-PLAIN, GENERAL PURPOSE |
|
NASM51923 |
PIN, SPRING-TUBULAR, COILED, STANDARD DUTY |
|
NASM5673 |
PIN, STRAIGHT, HEADED |
|
NASM77072 |
TERMINAL, LUG, SOLDER TYPE, PHOSPHOR BRONZE STAMPING, LOCKING TYPE, FLAT, ONE HOLE |
|
NASM77073 |
TERMINAL, LUG, SOLDER TYPE, PHOSPHOR BRONZE STAMPING, LOCKING TYPE, FLAT, ONE HOLE |
|
NASM85643 |
BITS, SCREWDRIVER, RIBBED GENERAL SPECIFICATION FOR |
|
NASM85643/1 |
BIT, SCREWDIRVER, RIBBED, CRUCIFORM, INSERT TYPE, EXTERNAL HEXAGONSHANK, MANUALLY DRIVEN |
|
NASM85643/2 |
BIT, SCREWDRIVER. RIBBED, CRUCIFORM, LONG SHANK, EXTERNAL HEXAGON SHANK, POWER DRIVEN |
|
NASM85643/3 |
BIT, SCREWDRIVER, RIBBED, OFFSET CRUCIFORM, EXTERNAL HEXAGON SHANK, POWER DRIVEN |
|
NASM85643/4 |
BIT, SCREWDRIVER, RIBBED, OFFSET CRUCIFORM, LONG SHANK, EXTERNAL HEXAGON SHANK |
|
NASM85643/5 |
BIT, SCREWDRIVER, INSERT TYPE, RIBBED, OFFSET CRUCIFORM, EXTERNAL HEXAGON SHANK, MANUALLY DRIVEN |
|
NASM90120 |
KNOBS, CONTROL, BAR, PLASTIC |
|
NASM91522 |
KNOB, CONTROL, CRANK, METAL |
|
NASM91523 |
KNOB, CONTROL, LEVER, METAL | </